Panasonic Wv Ns202a Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Ns202a Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Configures the multi-screen settings [Multi-screen setup]
The cameras to be used for the multi-screen display can be registered on this page.
Refer to page 9 for descriptions of how to display images on a multi-screen.
The following cameras are applicable for the multi-screen display. (as of May 2007)
WV-NF284 series, WV-NS202 series, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-
NS320 series, WV-NW484S series, WV-NS202A series
[IP address]
Enter the IP address or the host name...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-50.png "Page 51
51
Configures the multi-screen settings [Multi-screen setup]
The cameras to be used for the multi-screen display can be registered on this page.
Refer to page 9 for descriptions of how to display images on a multi-screen.
The following cameras are applicable for the multi-screen display. (as of May 2007)
WV-NF284 series, WV-NS202 series, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-
NS320 series, WV-NW484S series, WV-NS202A series
[IP address]
Enter the IP address or the host name...")
51 Configures the multi-screen settings [Multi-screen setup] The cameras to be used for the multi-screen display can be registered on this page. Refer to page 9 for descriptions of how to display images on a multi-screen. The following cameras are applicable for the multi-screen display. (as of May 2007) WV-NF284 series, WV-NS202 series, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV- NS320 series, WV-NW484S series, WV-NS202A series [IP address] Enter the IP address or the host name...
Page 52
![Page 52
52
Configure the alarm settings [Alarm setup]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm
occurrence notification, and the VMD area settings can be configured on this page.
The Alarm setup page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
Configure the settings relating to the alarm [Alarm]
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-51.png "Page 52
52
Configure the alarm settings [Alarm setup]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm
occurrence notification, and the VMD area settings can be configured on this page.
The Alarm setup page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
Configure the settings relating to the alarm [Alarm]
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm...")
52 Configure the alarm settings [Alarm setup] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on this page. The Alarm setup page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab. Configure the settings relating to the alarm [Alarm] Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu) Alarm...
Page 53
![Page 53
53
Configure the settings relating to the camera action at an alarm occurrence
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Camera motion on alarm
The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages
52, 55 and 56 for further information about the settings relating to the alarm, the alarm image and the alarm output
terminal.
[Terminal alarm 1]
Select an action to be taken when a...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-52.png "Page 53
53
Configure the settings relating to the camera action at an alarm occurrence
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Camera motion on alarm
The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages
52, 55 and 56 for further information about the settings relating to the alarm, the alarm image and the alarm output
terminal.
[Terminal alarm 1]
Select an action to be taken when a...")
53 Configure the settings relating to the camera action at an alarm occurrence Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu) Camera motion on alarm The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 52, 55 and 56 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal. [Terminal alarm 1] Select an action to be taken when a...
Page 54
![Page 54
54
[Command alarm]
Select an action to be taken when a command alarm is
detected from the following.
OFF:Does not take any action even when a command
alarm is detected.
1-64:When the registered preset position is selected,
the camera will move to the selected preset position
when a command alarm is detected.
Auto track:When a command alarm is detected, the
camera will start the auto tracking.
When the home position is set, the camera will start
auto tracking after moving to the home position
once....](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-53.png "Page 54
54
[Command alarm]
Select an action to be taken when a command alarm is
detected from the following.
OFF:Does not take any action even when a command
alarm is detected.
1-64:When the registered preset position is selected,
the camera will move to the selected preset position
when a command alarm is detected.
Auto track:When a command alarm is detected, the
camera will start the auto tracking.
When the home position is set, the camera will start
auto tracking after moving to the home position
once....")
54 [Command alarm] Select an action to be taken when a command alarm is detected from the following. OFF:Does not take any action even when a command alarm is detected. 1-64:When the registered preset position is selected, the camera will move to the selected preset position when a command alarm is detected. Auto track:When a command alarm is detected, the camera will start the auto tracking. When the home position is set, the camera will start auto tracking after moving to the home position once....
Page 55
![Page 55
55
Configure the settings relating to the alarm image
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm image setup
The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The
alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con-
figure the settings in advance. (page 66)
Refer to pages 52, 53 and 56 for further information...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-54.png "Page 55
55
Configure the settings relating to the alarm image
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm image setup
The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The
alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con-
figure the settings in advance. (page 66)
Refer to pages 52, 53 and 56 for further information...")
55 Configure the settings relating to the alarm image Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu) Alarm image setup The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con- figure the settings in advance. (page 66) Refer to pages 52, 53 and 56 for further information...
Page 56
![Page 56
56
Configure the settings relating to the alarm out terminal
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm output terminal setup
The settings relating to the alarm out terminal can be configured in this section. The settings for the alarm output ter-
minal can be configured only when Alarm output is selected for Terminal alarm 2 of Alarm setup. Refer to pages
52, 53 and 55 for further information about the settings relating to the alarm,...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-55.png "Page 56
56
Configure the settings relating to the alarm out terminal
Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
Alarm output terminal setup
The settings relating to the alarm out terminal can be configured in this section. The settings for the alarm output ter-
minal can be configured only when Alarm output is selected for Terminal alarm 2 of Alarm setup. Refer to pages
52, 53 and 55 for further information about the settings relating to the alarm,...")
56 Configure the settings relating to the alarm out terminal Click the [Alarm] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu) Alarm output terminal setup The settings relating to the alarm out terminal can be configured in this section. The settings for the alarm output ter- minal can be configured only when Alarm output is selected for Terminal alarm 2 of Alarm setup. Refer to pages 52, 53 and 55 for further information about the settings relating to the alarm,...
Page 57
![Page 57
57
Set the VMD areas [VMD area]
Click the [VMD area] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
The video motion detection areas can be set on this page.
The VMD areas can be set for each preset position (up to 64 areas). When motion is detected in the set area, the
alarm action will be performed. The camera can be configured to take an alarm action even when the camera is not
at the preset position.
Important:
•Areas used for the time and date display of OSD...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-56.png "Page 57
57
Set the VMD areas [VMD area]
Click the [VMD area] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu)
The video motion detection areas can be set on this page.
The VMD areas can be set for each preset position (up to 64 areas). When motion is detected in the set area, the
alarm action will be performed. The camera can be configured to take an alarm action even when the camera is not
at the preset position.
Important:
•Areas used for the time and date display of OSD...")
57 Set the VMD areas [VMD area] Click the [VMD area] tab on the Alarm setup page. (pages 20 and 21: How to display/operate the setup menu) The video motion detection areas can be set on this page. The VMD areas can be set for each preset position (up to 64 areas). When motion is detected in the set area, the alarm action will be performed. The camera can be configured to take an alarm action even when the camera is not at the preset position. Important: •Areas used for the time and date display of OSD...
Page 58
58 Configure to detect motion in areas without the preset positions Configure whether or not to detect motion when the camera is not at the preset position by setting the detection sen- sitivity. The sensitivity can be set by configuring VMD area setting except Preset position. When determining whether to detect motion even when the camera is not at the preset position, all areas except areas used for the time and date display of OSD position will be subject to the detection. The VMD area setting is...
Page 59
![Page 59
59
Step 1
Select a preset position number to which the VMD area
is to be set from Preset position select of VMD area
setting for Preset position.
Step 2
Click the [Setup] button.
→The VMD area setup window for the selected preset
position number will be displayed.
Step 3
Set the video motion detection area by dragging the
mouse on the screen.
When the [All areas] button is clicked, the whole area
will become the VMD area and set as area 1 (white).
→The designated area will become the VMD area and
the...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-58.png "Page 59
59
Step 1
Select a preset position number to which the VMD area
is to be set from Preset position select of VMD area
setting for Preset position.
Step 2
Click the [Setup] button.
→The VMD area setup window for the selected preset
position number will be displayed.
Step 3
Set the video motion detection area by dragging the
mouse on the screen.
When the [All areas] button is clicked, the whole area
will become the VMD area and set as area 1 (white).
→The designated area will become the VMD area and
the...")
59 Step 1 Select a preset position number to which the VMD area is to be set from Preset position select of VMD area setting for Preset position. Step 2 Click the [Setup] button. →The VMD area setup window for the selected preset position number will be displayed. Step 3 Set the video motion detection area by dragging the mouse on the screen. When the [All areas] button is clicked, the whole area will become the VMD area and set as area 1 (white). →The designated area will become the VMD area and the...
Page 60
![Page 60
60
Step 5
Select the detection sensitivity from the following. The
selected detection sensitivity will be applied to all the
VMD areas.
1 (Super high)/2/3/4 (High)/5 (Middle)/6 (Low)
Default:MiddleStep 6
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but-
ton is clicked.
Delete the VMD area set for the designated preset position
Step 1
Display the VMD area setup window of the preset posi-
tion number whose VMD area is to be deleted....](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-59.png "Page 60
60
Step 5
Select the detection sensitivity from the following. The
selected detection sensitivity will be applied to all the
VMD areas.
1 (Super high)/2/3/4 (High)/5 (Middle)/6 (Low)
Default:MiddleStep 6
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but-
ton is clicked.
Delete the VMD area set for the designated preset position
Step 1
Display the VMD area setup window of the preset posi-
tion number whose VMD area is to be deleted....")
60 Step 5 Select the detection sensitivity from the following. The selected detection sensitivity will be applied to all the VMD areas. 1 (Super high)/2/3/4 (High)/5 (Middle)/6 (Low) Default:MiddleStep 6 Click the [SET] button after completing the settings. Important: The setting will not be applied unless the [SET] but- ton is clicked. Delete the VMD area set for the designated preset position Step 1 Display the VMD area setup window of the preset posi- tion number whose VMD area is to be deleted....