Panasonic Wv Ns202a Operating Instructions Manual

71
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the Network setup page. (pages 20 and 21: How to display/operate the setup menu)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by
connecting to the SNMP manager. When using the SNMP function, contact the network administrator. 
[Community name]
Enter the community name to be monitored. 
Number of characters for the community name:
0 - 32 characters
Default:None...

72
Configure the settings relating to the FTP periodic transmission [FTP]
Click the [FTP] tab on the Network setup page. (pages 20 and 21: How to display/operate the setup menu)
FTP periodic transmission
The settings relating to the periodic transmission of images to an FTP server can be configured in this section. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance.
(page 66)
Refer to page 73 for descriptions of how to configure...

73
Configure the schedule settings of the FTP periodic transmission
Click the [FTP] tab on the Server setup page. (pages 20 and 21: How to display/operate the setup menu)
Schedule setup
The schedule settings of the FTP periodic transmission can be configured in this section. Refer to page 72 for further
information about the settings relating to the FTP periodic transmission.
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
→The selected day of the week...

74
How to delete the set schedule
Step 1
Uncheck the check box of the set day of the week.
Step 2
Click the [SET] button after completing the settings.
→The result will be displayed at the bottom of the win-
dow.  

75
Configure the settings relating to the schedules 
[Schedule setup]
On the Schedule page, it is possible to determine time zones for when the following are available.
•Alarm permission (Alarm input will be received only in the specified time zone.)
•VMD permission (Video motion detection will be active only in the specified time zone.)
•Access permission (Access to the camera will be allowed only in the specified time zone.)
•Position refresh (Performing the position refresh will be allowed only in the...

76
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.
The Maintenance page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Initialization] tab.
Check the system log [System log]
Click the [System log] tab of the Maintenance page. (pages 20 and 21: How to display/operate the setup menu)
Up to 4 000 system logs can be saved on the SD memory card when the SD memory card is inserted after selecting
Use...

77
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the Maintenance page. (pages 20 and 21: How to display/operate the setup menu)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade. 
[Model No.], [MAC address], [Serial number],
[Firmware version], [IPL version], [Viewer software
installation counter]
Information of each item will be displayed. 
How to upgrade the firmware
Step 1
Contact the...

78
Initialize/restart the camera [Initialization]
Click the [Initialization] tab of the Maintenance page. (pages 20 and 21: How to display/operate the setup menu)
Initialization of the settings and data of the camera and restarting of the camera can be performed on this page. 
[Initialize camera setup data (Except network and
preset setup data)]
Click the [Execute] button to reset the settings to the
default. Note that the network settings and the preset
position setting will not be reset.
It is...

79
About the displayed system log
Error indications relating to SMTP
Category
POP3 server error
SMTP server error
Internal errorAuthentication error
Failed to find POP3 server
SMTP authentication error
Other error Failed to resolve mail server address from
DNS
Failed to find SMTP serverEntered user name or password may be
incorrect. Check if the mail settings are con-
figured correctly.
•The IP address of the server may be
incorrect. Check if the IP address of the
server is configured correctly.
•The...

80
Category
Connection error
Connection error
Login Time adjustment 
synchronizing with NTP
succeeded. Internal error Internal errorNo response from the server
No response from the server
User name or IP address Auto time adjustment succeeded. Other error Password error for the entered user name
IP address updated error
Other error•The designated IP address of the DDNS
may be incorrect. Check if the DDNS set-
tings are configured correctly. 
•The DDNS server may be down. Ask the
network administrator....