Panasonic Wv Ns202a Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Ns202a Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Configure the settings relating to the logs [LOG]
Click the [LOG] tab on the Basic setup page.(pages 20 and 21: How to display/operate the setup menu)
Alarm
[Save logs]
Select ON or OFF to determine whether to save the
alarm logs.
ON:Saves the alarm logs
OFF:Does not save the alarm logs
Default:ON
[Name of the destination directory for downloaded
images]
Enter the name of the destination directory to which
images associated with the logs are to be downloaded.
For example, enter C:\alarm to designate...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-30.png "Page 31
31
Configure the settings relating to the logs [LOG]
Click the [LOG] tab on the Basic setup page.(pages 20 and 21: How to display/operate the setup menu)
Alarm
[Save logs]
Select ON or OFF to determine whether to save the
alarm logs.
ON:Saves the alarm logs
OFF:Does not save the alarm logs
Default:ON
[Name of the destination directory for downloaded
images]
Enter the name of the destination directory to which
images associated with the logs are to be downloaded.
For example, enter C:\alarm to designate...")
31 Configure the settings relating to the logs [LOG] Click the [LOG] tab on the Basic setup page.(pages 20 and 21: How to display/operate the setup menu) Alarm [Save logs] Select ON or OFF to determine whether to save the alarm logs. ON:Saves the alarm logs OFF:Does not save the alarm logs Default:ON [Name of the destination directory for downloaded images] Enter the name of the destination directory to which images associated with the logs are to be downloaded. For example, enter C:\alarm to designate...
Page 32
![Page 32
How the logs and images are saved depending on the settings for Alarm
[LOG] tab
ON
32
Alarm: Save logs
OFFUseAlarm input
Not useOther than Alarm
input
–
[SD memory card] tab
SD memory card
Use
Not use –
Save trigger
Alarm input
Other than Alarm
inputLogs: Up to 5 000 logs will be kept. When more than 5 000
logs are filed, the older logs will be overwritten by the
newer logs.
In this case, the oldest log is the first to be overwrit-
ten.
Images: Images associated with the logs will be saved. When...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-31.png "Page 32
How the logs and images are saved depending on the settings for Alarm
[LOG] tab
ON
32
Alarm: Save logs
OFFUseAlarm input
Not useOther than Alarm
input
–
[SD memory card] tab
SD memory card
Use
Not use –
Save trigger
Alarm input
Other than Alarm
inputLogs: Up to 5 000 logs will be kept. When more than 5 000
logs are filed, the older logs will be overwritten by the
newer logs.
In this case, the oldest log is the first to be overwrit-
ten.
Images: Images associated with the logs will be saved. When...")
How the logs and images are saved depending on the settings for Alarm [LOG] tab ON 32 Alarm: Save logs OFFUseAlarm input Not useOther than Alarm input – [SD memory card] tab SD memory card Use Not use – Save trigger Alarm input Other than Alarm inputLogs: Up to 5 000 logs will be kept. When more than 5 000 logs are filed, the older logs will be overwritten by the newer logs. In this case, the oldest log is the first to be overwrit- ten. Images: Images associated with the logs will be saved. When...
Page 33
![Page 33
ON
How the logs and images are saved depending on the settings for Manual
Logs and associated images [LOG] tab
33
Manual:
Save logs
Not use – –
Use
Other than
Manual–Logs: Logs will not be saved.
Images: Images will not be saved. OFFManualON
OFF
[SD memory card] tab
SD memory
card
Use
Other than
Manual–
Save trigger Overwrite
ManualON
OFFLogs: Up to 5 000 logs will be kept. When more than 5 000
logs are filed, the older logs will be overwritten by the
newer logs.
In this case, the oldest log is the first...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-32.png "Page 33
ON
How the logs and images are saved depending on the settings for Manual
Logs and associated images [LOG] tab
33
Manual:
Save logs
Not use – –
Use
Other than
Manual–Logs: Logs will not be saved.
Images: Images will not be saved. OFFManualON
OFF
[SD memory card] tab
SD memory
card
Use
Other than
Manual–
Save trigger Overwrite
ManualON
OFFLogs: Up to 5 000 logs will be kept. When more than 5 000
logs are filed, the older logs will be overwritten by the
newer logs.
In this case, the oldest log is the first...")
ON How the logs and images are saved depending on the settings for Manual Logs and associated images [LOG] tab 33 Manual: Save logs Not use – – Use Other than Manual–Logs: Logs will not be saved. Images: Images will not be saved. OFFManualON OFF [SD memory card] tab SD memory card Use Other than Manual– Save trigger Overwrite ManualON OFFLogs: Up to 5 000 logs will be kept. When more than 5 000 logs are filed, the older logs will be overwritten by the newer logs. In this case, the oldest log is the first...
Page 34
OFFUse Not useOther than FTP error – FTP error Not use –Other than FTP error Logs: Logs will not be saved. Images: Images will not be saved. Logs: Logs will not be saved. Images: Images will be saved. When available capacity of the SD memory card ran out, saving of images will become impossible. Note:To display images on the SD memory card, it is neces- sary to copy them onto the PC first. (page 29) Logs: Logs will not be saved. Images: Images will not be saved. Logs: Logs will not be saved. Images:...
Page 35
![Page 35
35
Configure the settings relating to images and audio [Camera
setup]
The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset
positions, audio, etc. can be configured on this page.
The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and
the [Audio] tab.
Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21:...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-34.png "Page 35
35
Configure the settings relating to images and audio [Camera
setup]
The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset
positions, audio, etc. can be configured on this page.
The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and
the [Audio] tab.
Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21:...")
35 Configure the settings relating to images and audio [Camera setup] The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset positions, audio, etc. can be configured on this page. The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and the [Audio] tab. Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4] Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21:...
Page 36
![Page 36
36
MPEG-4 setup
Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image
quality, etc. in this section. Refer to page 35 for further information about the settings relating to JPEG images.
Refer to page 89 for how to configure settings to transmit MPEG-4 images via the Internet.
[MPEG-4 transmission]
Select ON or OFF to determine whether or...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-35.png "Page 36
36
MPEG-4 setup
Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image
quality, etc. in this section. Refer to page 35 for further information about the settings relating to JPEG images.
Refer to page 89 for how to configure settings to transmit MPEG-4 images via the Internet.
[MPEG-4 transmission]
Select ON or OFF to determine whether or...")
36 MPEG-4 setup Click the [JPEG/MPEG-4] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup menu) Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image quality, etc. in this section. Refer to page 35 for further information about the settings relating to JPEG images. Refer to page 89 for how to configure settings to transmit MPEG-4 images via the Internet. [MPEG-4 transmission] Select ON or OFF to determine whether or...
Page 37
![Page 37
37
Multicast:No concurrent access limitation for a cam-
era.
Refer to page 4 for further information about the maxi-
mum concurrent access number.
Default:Unicast port (AUTO)
[Unicast port1 (Image)]
Enter the unicast port number (used to transmit images
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:32004
[Unicast port2 (Audio)]
Enter the unicast port number (used to transmit audio
from the camera).
Available port number:1024 - 50000 (Only even num-...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-36.png "Page 37
37
Multicast:No concurrent access limitation for a cam-
era.
Refer to page 4 for further information about the maxi-
mum concurrent access number.
Default:Unicast port (AUTO)
[Unicast port1 (Image)]
Enter the unicast port number (used to transmit images
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:32004
[Unicast port2 (Audio)]
Enter the unicast port number (used to transmit audio
from the camera).
Available port number:1024 - 50000 (Only even num-...")
37 Multicast:No concurrent access limitation for a cam- era. Refer to page 4 for further information about the maxi- mum concurrent access number. Default:Unicast port (AUTO) [Unicast port1 (Image)] Enter the unicast port number (used to transmit images from the camera). Available port number:1024 - 50000 (Only even num- bers are available.) Default:32004 [Unicast port2 (Audio)] Enter the unicast port number (used to transmit audio from the camera). Available port number:1024 - 50000 (Only even num-...
Page 38
![Page 38
38
Configure the settings relating to the camera title and the camera operations [Cam
Function]
Click the [Cam Function] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
Configure the settings relating to camera title and the camera operations on this page.
[Camera title on screen]
Select ON or OFF to determine whether or not to dis-
play the camera title on images.
Default:OFF
[Camera title on screen (0-9, A-Z)]
Enter the camera title to be displayed on images....](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-37.png "Page 38
38
Configure the settings relating to the camera title and the camera operations [Cam
Function]
Click the [Cam Function] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
Configure the settings relating to camera title and the camera operations on this page.
[Camera title on screen]
Select ON or OFF to determine whether or not to dis-
play the camera title on images.
Default:OFF
[Camera title on screen (0-9, A-Z)]
Enter the camera title to be displayed on images....")
38 Configure the settings relating to the camera title and the camera operations [Cam Function] Click the [Cam Function] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup menu) Configure the settings relating to camera title and the camera operations on this page. [Camera title on screen] Select ON or OFF to determine whether or not to dis- play the camera title on images. Default:OFF [Camera title on screen (0-9, A-Z)] Enter the camera title to be displayed on images....
Page 39
![Page 39
39
[Upside-down]
Select ON (desktop) or OFF (ceiling) to determine
how the camera is to be installed.
ON (desktop):Select this when the camera is to be
installed with the dome side up.
OFF (ceiling):Select this when the camera is to be
installed with the dome side down.
Default:OFF (ceiling)
[EL-ZOOM]
Select ON or OFF to determine whether or not to use
the electronic zoom.
ON (Max X10):Images can be zoomed in on with the
optical zoom (1x - 22 x) and the electronic zoom
(23x – 220x).
OFF:Does not use the...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-38.png "Page 39
39
[Upside-down]
Select ON (desktop) or OFF (ceiling) to determine
how the camera is to be installed.
ON (desktop):Select this when the camera is to be
installed with the dome side up.
OFF (ceiling):Select this when the camera is to be
installed with the dome side down.
Default:OFF (ceiling)
[EL-ZOOM]
Select ON or OFF to determine whether or not to use
the electronic zoom.
ON (Max X10):Images can be zoomed in on with the
optical zoom (1x - 22 x) and the electronic zoom
(23x – 220x).
OFF:Does not use the...")
39 [Upside-down] Select ON (desktop) or OFF (ceiling) to determine how the camera is to be installed. ON (desktop):Select this when the camera is to be installed with the dome side up. OFF (ceiling):Select this when the camera is to be installed with the dome side down. Default:OFF (ceiling) [EL-ZOOM] Select ON or OFF to determine whether or not to use the electronic zoom. ON (Max X10):Images can be zoomed in on with the optical zoom (1x - 22 x) and the electronic zoom (23x – 220x). OFF:Does not use the...
Page 40
![Page 40
40
Configure the settings relating to images and the preset positions [Image/Position]
Click the [Image/Position] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position]
tab.
The following are descriptions of how to configure the settings relating...](http://img.usermanuals.tech/thumb/58/68513/w300_wv-ns202a_en_om_d-39.png "Page 40
40
Configure the settings relating to images and the preset positions [Image/Position]
Click the [Image/Position] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup
menu)
When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly
opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position]
tab.
The following are descriptions of how to configure the settings relating...")
40 Configure the settings relating to images and the preset positions [Image/Position] Click the [Image/Position] tab on the Camera setup page. (pages 20 and 21: How to display/operate the setup menu) When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly opened window. The detailed settings can be configured while monitoring images displayed on the [Image/Position] tab. The following are descriptions of how to configure the settings relating...