Panasonic Wv Np472 Operating Instructions Manual

-41- Transparency:Indicates a non-masked area that
has been incorporated into the detection area.
Blink:Indicates a non-masked area when the cur-
sor is on it.
Highlight:Indicates a masked area that has been
exempted from detection.
Stripe:Indicates an area already set to masked
when the cursor is on it.
6. Move the cursor to an area, and click ENTER. 
•The area will change from blinking to highlighted
(masked), and then to striping.
•The striping area will change to blinking (non-
masked).
7. Repeat...

-42- 3. The selected picture is displayed, and the alarm
image control panel appears on the bottom of the
screen. The title of the control panel is followed by
a fraction indicating the number of the displayed
picture and total number for the event.
4. Use the buttons to control pictures.
First:Displays the initial picture in the event.
Previous:Displays the previous picture.
Alarm Event:Displays the picture recorded when
the alarm was input.
Next:Displays the next picture.
Last:Displays the final...

-43-
AUXILIARY OUTPUT CONTROL
■Auxiliary Output Control
You can turn on or off the connected device, for exam-
ple a lamp that is connected to the AUX OUT terminal
of the camera.
1. Open the auxiliary output control window clicking
the AUX Output Control button in the main page.
2. Select the polarity to switch on or off the connected
device.
High:Supplies high voltage.
Low:Supplies low voltage.
3. Click the EXE button.
4. Click the Return button to go back to the main
page.
Note:The initial state is...

Symptom
No picture is displayed.
-44-
TROUBLESHOOTING
HTML documents are not displayed.• Is the AC adapter firmly plugged in to the outlet?
• Are the POWER IN terminals on the camera connected with
the AC adapter properly?
• Is the lens cap removed?
• Is the video cable or network cable connected properly? 
• HTML files in the camera might be broken. Initializing is
required.10
10
8
10, 11
36 Cannot access the camera from the
browser.• Are the network cables connected properly?
• Is the status indicator...

-45-
SPECIFICATIONS
General
Ambient Operating Temperature: –10 °C - +50 °C (14 °F - 122 °F)
Ambient Operating Humidity: Less than 90 %
Power Source and Power Consumption: 12 V DC, 700 mA
Dimensions (without lens): 70 mm (W) x 65 mm (H) x 118 mm (D)
2-3/4” (W) x 2-5/8” (H) x 4-5/8” (D)
Weight (without lens): 0.51 kg (1.1 lbs.) 
Network Section
Image Resolution: 640x480, 640x240, 320x240, 160x120 pixel
Image Process: JPEG (quality selectable Super Fine/ Fine/ Normal/ Rough)
Image Refreshing Rate: Fast/...

-46-
STANDARD ACCESSORIES
Body Cap  .............................................................................. 1 pc.
ALC Lens Connector (YFE4191J100)  ................................... 1 pc.
CD-ROM (PDF Manual Contained)  ....................................... 1 pc.
C-mount Adapter  ................................................................... 1 pc.
OPTIONAL ACCESSORIES
Lenses : WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3 WV-LA908C3, WV-LZ61/10, WV-
LZ61/15, WV-LZA61/2,...

N1002-1112      3TR001281BAB      Printed in Japan
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, 
P.R. 00985 (809)750-4300Panasonic Digital Communications & Security Company
Unit Company of Matsushita Electric Corporation of America
Security Systems
www.panasonic.com/cctv
Executive Office: One Panasonic Way 3E-7,...