Panasonic Wv Np472 Operating Instructions Manual

(Lens : option)
SDII
day/night
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WV-NP472
Color CCTV Camera
Operating Instructions
(Lens: Option) 

-2-
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated dangerous volt-
age within the products enclosure that
may be of sufficient magnitude to con-
stitute a risk of...

-3-
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or...

-4-
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ....................... 3
PREFACE ..................................................................... 5
Features .................................................................... 5
Computer Requirements  .......................................... 5
Trademarks ............................................................... 5
Document Convention  .............................................. 5
PRECAUTIONS...

-5-
Features
•10/100BASE-T terminal enables your PC to view
camera images via the network.
•SD II (super dynamic) system allows a wide range
of 46 dB while preventing images from being
spoiled by strong background light.
•High resolution supported by a 1/3” CCD having
380 000 pixels
•A 0.8 lx illuminance is allowed when using a F=1.4
lens, thanks to low-noise design. A 0.4 lx illumi-
nance is allowed when using an aspherical F=0.75
large-aperture lens.
•Switchable video mode between color and mono-...

-6- 1. The installation should be made by qualified
service personnel or system installers.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside.  Ask
qualified service personnel for servicing.
3. Handle the camera with care.
Do not abuse the camera.  Avoid striking, shaking,
etc.  The camera could be damaged by improper
handling or storage.
4. Do not use strong or abrasive detergents when
cleaning the camera...

t i
you
qwe
r
WV–NP472
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
ABVIDEO OUT
RCV
LINK 10BASE-T/
100BASE-TXPOWERDC 12V
IN
!3
!4
!2!1
!0
-7-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Slide the panel to the left until it locks.
qAuto Iris Lens Connector
Connects the auto iris lens with a 4-pin male con-
nector supplied as a standard accessory (Part No.
YFE4191J100).
wFlange-back Adjusting Ring & Screw
Adjusts the back focal length and picture focus.
eLens (Option)
rCamera Mounting Adapter
Mounts the...

-8-• Mounting the Lens
Notes:
•Using the lens having improper protrusion will
damage the camera. The protrusion of the lens into
the camera body should be within the length indi-
cated in the figure.
•Secure both the lens and camera with the support-
er (not supplied) if a lens heavier than 450 g
(0.99 lbs) is mounted.
1. Attach the supplied C-mount adapter when using a
C-mount lens.
The camera at the factory shipment can accept
only a CS-mount lens.
2. Jump to step 3 if the lens has focus adjusting...

-9- • Flange-back Adjustment
The adjustment is required only when a lens without
focus-adjusting mechanism is mounted, or when a lens
with adjusting mechanism is mounted and focus that is
more accurate is needed.
1. Loosen the flange-back fixing screw on the flange-
back adjusting ring.
2. Turn the flange-back adjusting ring to obtain a
focused point while watching the monitor screen.
3. Tighten the flange-back fixing screw softly and
securely.
Note:The object may be out of focus when using a
source of...

-10-
Power-in Connections
Notes:
•Use only a class-2 power supply suitable to the
voltage and current required by the camera. See
specifications.
•Use a UL listed cable (VW-1, style 1007) to pre-
vent fire or electric shock.
You can use the formula below to select the power
supply, and power cable. The supplied voltage to the
power-in terminals must be between 10.8V and 16V.
10.8V(minimum) ≤VA – 2RLI ≤16V (maximum)
VA: Output voltage of power supply
R: Resistance (Ω/m) (Ω/ft), see table
L: Cable length...