Panasonic Wv Np1000 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Np1000 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
How to adjust white balance(When AWC is selected WHITE BAL)q Select AWC for WHITE BAL, and then press
the [Left] button to switch to AWC →PUSH SW.
w Press the [SET] button to adjust white balance.
The PUSH SW part will be highlighted in the
process of the adjustment. When the highlighted
indication returns to normal indication, adjust-
ment of white balance is complete.
e Press the [Right] button to select AWC.
Refer to page 58 for descriptions of how to adjust
white balance finely.
Note:
Operating...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-50.png "Page 51
51
How to adjust white balance(When AWC is selected WHITE BAL)q Select AWC for WHITE BAL, and then press
the [Left] button to switch to AWC →PUSH SW.
w Press the [SET] button to adjust white balance.
The PUSH SW part will be highlighted in the
process of the adjustment. When the highlighted
indication returns to normal indication, adjust-
ment of white balance is complete.
e Press the [Right] button to select AWC.
Refer to page 58 for descriptions of how to adjust
white balance finely.
Note:
Operating...")
51 How to adjust white balance(When AWC is selected WHITE BAL)q Select AWC for WHITE BAL, and then press the [Left] button to switch to AWC →PUSH SW. w Press the [SET] button to adjust white balance. The PUSH SW part will be highlighted in the process of the adjustment. When the highlighted indication returns to normal indication, adjust- ment of white balance is complete. e Press the [Right] button to select AWC. Refer to page 58 for descriptions of how to adjust white balance finely. Note: Operating...
Page 52
![Page 52
52
Configure the settings relating to the flange-back [BACK-
FOCUS]
Select the method of the flange-back length adjustment and adjust the fl\
ange-back length minutely. The settings can
be configured on the BACK-FOCUS SETUP page. Before adjusting the flang\
e-back length, adjust the lens first.
( Operating instructions (book))
Refer to the operating instructions (book) for descriptions of how to \
display the BACK-FOCUS SETUP page.
The flange-back length is the distance between flange surface and the...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-51.png "Page 52
52
Configure the settings relating to the flange-back [BACK-
FOCUS]
Select the method of the flange-back length adjustment and adjust the fl\
ange-back length minutely. The settings can
be configured on the BACK-FOCUS SETUP page. Before adjusting the flang\
e-back length, adjust the lens first.
( Operating instructions (book))
Refer to the operating instructions (book) for descriptions of how to \
display the BACK-FOCUS SETUP page.
The flange-back length is the distance between flange surface and the...")
52 Configure the settings relating to the flange-back [BACK- FOCUS] Select the method of the flange-back length adjustment and adjust the fl\ ange-back length minutely. The settings can be configured on the BACK-FOCUS SETUP page. Before adjusting the flang\ e-back length, adjust the lens first. ( Operating instructions (book)) Refer to the operating instructions (book) for descriptions of how to \ display the BACK-FOCUS SETUP page. The flange-back length is the distance between flange surface and the...
Page 53
![Page 53
53
[SETUP-SW LOCK]
Select ON or OFF to determine whether or not to use
the operation buttons on the camera for the flange-back
length adjustment.
ON:The operation buttons on the camera are unavail-
able for the flange-back length adjustment.
OFF:The flange-back length can be adjusted using the
operation buttons on the camera.
Default:OFF
Important:
•Adjust the flange-back length depending on a subject as follows.
•We assume no responsibility whatsoever for any damages resulting from the use of the auto...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-52.png "Page 53
53
[SETUP-SW LOCK]
Select ON or OFF to determine whether or not to use
the operation buttons on the camera for the flange-back
length adjustment.
ON:The operation buttons on the camera are unavail-
able for the flange-back length adjustment.
OFF:The flange-back length can be adjusted using the
operation buttons on the camera.
Default:OFF
Important:
•Adjust the flange-back length depending on a subject as follows.
•We assume no responsibility whatsoever for any damages resulting from the use of the auto...")
53 [SETUP-SW LOCK] Select ON or OFF to determine whether or not to use the operation buttons on the camera for the flange-back length adjustment. ON:The operation buttons on the camera are unavail- able for the flange-back length adjustment. OFF:The flange-back length can be adjusted using the operation buttons on the camera. Default:OFF Important: •Adjust the flange-back length depending on a subject as follows. •We assume no responsibility whatsoever for any damages resulting from the use of the auto...
Page 54
![Page 54
54
Configure the settings on the SPECIAL SETUP page
[SPECIAL SETUP]
Configure the settings relating to image quality can be configured on th\
e SPECIAL SETUP page. The settings can
be configured on the SPECIAL SETUP page.
Refer to the operating instructions (book) for descriptions of how to \
display the SPECIAL SETUP page.
SPECIAL SETUP page
[CHROMA GAIN]
Adjust the chroma level (colour density).
Colour density will be incremented when the cursor is
moved to the + direction, and will be decremented
when...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-53.png "Page 54
54
Configure the settings on the SPECIAL SETUP page
[SPECIAL SETUP]
Configure the settings relating to image quality can be configured on th\
e SPECIAL SETUP page. The settings can
be configured on the SPECIAL SETUP page.
Refer to the operating instructions (book) for descriptions of how to \
display the SPECIAL SETUP page.
SPECIAL SETUP page
[CHROMA GAIN]
Adjust the chroma level (colour density).
Colour density will be incremented when the cursor is
moved to the + direction, and will be decremented
when...")
54 Configure the settings on the SPECIAL SETUP page [SPECIAL SETUP] Configure the settings relating to image quality can be configured on th\ e SPECIAL SETUP page. The settings can be configured on the SPECIAL SETUP page. Refer to the operating instructions (book) for descriptions of how to \ display the SPECIAL SETUP page. SPECIAL SETUP page [CHROMA GAIN] Adjust the chroma level (colour density). Colour density will be incremented when the cursor is moved to the + direction, and will be decremented when...
Page 55
![Page 55
55
Configure the network settings [NETWORK]
Configure the network settings. When connecting the camera to a network, it is necessary to configure the network
settings such as IP address, etc.
The settings can be configured on the NETWORK SETUP page.
Refer to the operating instructions (book) for descriptions of how to display the NETWORK SETUP page.
Note:
Before configuring the settings, refer to the network administrator or the Internet service provider for the following
information.
•IP address
•Net...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-54.png "Page 55
55
Configure the network settings [NETWORK]
Configure the network settings. When connecting the camera to a network, it is necessary to configure the network
settings such as IP address, etc.
The settings can be configured on the NETWORK SETUP page.
Refer to the operating instructions (book) for descriptions of how to display the NETWORK SETUP page.
Note:
Before configuring the settings, refer to the network administrator or the Internet service provider for the following
information.
•IP address
•Net...")
55 Configure the network settings [NETWORK] Configure the network settings. When connecting the camera to a network, it is necessary to configure the network settings such as IP address, etc. The settings can be configured on the NETWORK SETUP page. Refer to the operating instructions (book) for descriptions of how to display the NETWORK SETUP page. Note: Before configuring the settings, refer to the network administrator or the Internet service provider for the following information. •IP address •Net...
Page 56
![Page 56
56
Configure the detailed settings
The following are descriptions of how to edit the camera title, adjust white balance, etc. on the detailed setup menu.
The camera title can be edited and displayed on the screen
The camera title can be edited and displayed on the screen. Up to 16 characters are available for the camera title.
Step 1
Select ON for CAMERA ID on the CAMERA
SETUP page.
→The camera ID edit page will be displayed.
Step 2
Move the cursor onto the desired character and press
the [SET] button....](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-55.png "Page 56
56
Configure the detailed settings
The following are descriptions of how to edit the camera title, adjust white balance, etc. on the detailed setup menu.
The camera title can be edited and displayed on the screen
The camera title can be edited and displayed on the screen. Up to 16 characters are available for the camera title.
Step 1
Select ON for CAMERA ID on the CAMERA
SETUP page.
→The camera ID edit page will be displayed.
Step 2
Move the cursor onto the desired character and press
the [SET] button....")
56 Configure the detailed settings The following are descriptions of how to edit the camera title, adjust white balance, etc. on the detailed setup menu. The camera title can be edited and displayed on the screen The camera title can be edited and displayed on the screen. Up to 16 characters are available for the camera title. Step 1 Select ON for CAMERA ID on the CAMERA SETUP page. →The camera ID edit page will be displayed. Step 2 Move the cursor onto the desired character and press the [SET] button....
Page 57
![Page 57
57
Compensate backlight
Set an area where backlight is to be compensated.
Step 1
Select ALC for ALC/ELC on the CAMERA SETUP
page.
→The ALC CONT page will be displayed.
Step 2
Move the cursor onto BLC and select ON or OFF.
ON:Backlight will be compensated automatically. (→To
step 6)
OFF:Manually set an area where backlight is to be
compensated. (→To step 3)
Default:OFF
Step 3
Move the cursor onto MASK SET and press the [SET]
button.
→The mask setup window will be displayed.
Step 4
Mask a bright area on...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-56.png "Page 57
57
Compensate backlight
Set an area where backlight is to be compensated.
Step 1
Select ALC for ALC/ELC on the CAMERA SETUP
page.
→The ALC CONT page will be displayed.
Step 2
Move the cursor onto BLC and select ON or OFF.
ON:Backlight will be compensated automatically. (→To
step 6)
OFF:Manually set an area where backlight is to be
compensated. (→To step 3)
Default:OFF
Step 3
Move the cursor onto MASK SET and press the [SET]
button.
→The mask setup window will be displayed.
Step 4
Mask a bright area on...")
57 Compensate backlight Set an area where backlight is to be compensated. Step 1 Select ALC for ALC/ELC on the CAMERA SETUP page. →The ALC CONT page will be displayed. Step 2 Move the cursor onto BLC and select ON or OFF. ON:Backlight will be compensated automatically. (→To step 6) OFF:Manually set an area where backlight is to be compensated. (→To step 3) Default:OFF Step 3 Move the cursor onto MASK SET and press the [SET] button. →The mask setup window will be displayed. Step 4 Mask a bright area on...
Page 58
![Page 58
58
Adjust white balance finely
After adjusting white balance using the auto tracking white balance (ATW) function or the auto white balance control
(AWC) function (page 50), manually adjust white balance finely.
Step 1
Press the [SET] button after selecting any of ATW1,
ATW2 and AWC for WHITE BAL on the CAMERA
SETUP page.
→The fine adjustment window will be displayed.
Step 2
Move the cursor onto R or B and adjust the level
using the [Left] and [Right] buttons. R indicates red
and B indicates blue. When...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-57.png "Page 58
58
Adjust white balance finely
After adjusting white balance using the auto tracking white balance (ATW) function or the auto white balance control
(AWC) function (page 50), manually adjust white balance finely.
Step 1
Press the [SET] button after selecting any of ATW1,
ATW2 and AWC for WHITE BAL on the CAMERA
SETUP page.
→The fine adjustment window will be displayed.
Step 2
Move the cursor onto R or B and adjust the level
using the [Left] and [Right] buttons. R indicates red
and B indicates blue. When...")
58 Adjust white balance finely After adjusting white balance using the auto tracking white balance (ATW) function or the auto white balance control (AWC) function (page 50), manually adjust white balance finely. Step 1 Press the [SET] button after selecting any of ATW1, ATW2 and AWC for WHITE BAL on the CAMERA SETUP page. →The fine adjustment window will be displayed. Step 2 Move the cursor onto R or B and adjust the level using the [Left] and [Right] buttons. R indicates red and B indicates blue. When...
Page 59
![Page 59
59
Configure the B/W mode settings
Configure the settings relating to the B/W mode such as brightness at ch\
ange between colour and B/W, waiting time
to change to the B/W mode, etc.
Step 1
Press the [SET] button after moving the cursor onto
BW MODE on the CAMERA SETUP page. → The BW MODE page will be displayed.
Step 2
Move the cursor onto BW and select a parameter from
the following.
AUTO1: Images will be automatically switched between
colour and B/W according to brightness (illumination).
When...](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-58.png "Page 59
59
Configure the B/W mode settings
Configure the settings relating to the B/W mode such as brightness at ch\
ange between colour and B/W, waiting time
to change to the B/W mode, etc.
Step 1
Press the [SET] button after moving the cursor onto
BW MODE on the CAMERA SETUP page. → The BW MODE page will be displayed.
Step 2
Move the cursor onto BW and select a parameter from
the following.
AUTO1: Images will be automatically switched between
colour and B/W according to brightness (illumination).
When...")
59 Configure the B/W mode settings Configure the settings relating to the B/W mode such as brightness at ch\ ange between colour and B/W, waiting time to change to the B/W mode, etc. Step 1 Press the [SET] button after moving the cursor onto BW MODE on the CAMERA SETUP page. → The BW MODE page will be displayed. Step 2 Move the cursor onto BW and select a parameter from the following. AUTO1: Images will be automatically switched between colour and B/W according to brightness (illumination). When...
Page 60
![Page 60
60
Set the privacy zone
When there is a zone that is not to be displayed, set the zone as a priv\
acy zone to not to display.
Up to 8 privacy zones can be set.
Step 1
Move the cursor onto PRIVACY ZONE on the CAM-
ERA SETUP page and press the [SET] button after
selecting ON (1) or ON (2). → The zone number selection page will be displayed.
Step 2
Confirm that the cursor is on 1 of 1/8 displayed on
the top of the page, and then press the [Left] button or
[Right] button to select the desired zone number....](http://img.usermanuals.tech/thumb/58/68504/w300_wv-np1000_en_om_d-59.png "Page 60
60
Set the privacy zone
When there is a zone that is not to be displayed, set the zone as a priv\
acy zone to not to display.
Up to 8 privacy zones can be set.
Step 1
Move the cursor onto PRIVACY ZONE on the CAM-
ERA SETUP page and press the [SET] button after
selecting ON (1) or ON (2). → The zone number selection page will be displayed.
Step 2
Confirm that the cursor is on 1 of 1/8 displayed on
the top of the page, and then press the [Left] button or
[Right] button to select the desired zone number....")
60 Set the privacy zone When there is a zone that is not to be displayed, set the zone as a priv\ acy zone to not to display. Up to 8 privacy zones can be set. Step 1 Move the cursor onto PRIVACY ZONE on the CAM- ERA SETUP page and press the [SET] button after selecting ON (1) or ON (2). → The zone number selection page will be displayed. Step 2 Confirm that the cursor is on 1 of 1/8 displayed on the top of the page, and then press the [Left] button or [Right] button to select the desired zone number....