Panasonic Wv Np1000 Operating Instructions Manual

Network camera
Operating Instructions 
Model Nos.WV-NP1000
WV-NP1004
P
U
S
H
 T
O LOC
K
/E
JE
C
T
WV-NP1004
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model numbers in these Operating Instructions are given without suffix.(Lens is option.)
The illustration above is of the WV-NP1004. 

2
Contents
Preface ............................................................................................................................ 3
About these operating instructions  .............................................................................. 3
Trademarks and registered trademarks  ...................................................................... 3
Monitoring Images on a PC  ............................................................................................. 4
Monitor...

3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WV-NP1000/WV-NP1004 as follows.
• Operating Instructions (book)
• Operating Instructions (PDF, these operating instructions)
These operating instructions contain descriptions of how to operate this product using a PC via a network and of
how to configure the settings. These operating instructions also contain descriptions of how to display the SETUP
menu on the video monitor connected to the VIDEO OUT...

4
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP
setup software in the address box of the browser.
(Example: http://192.168.0.10)
Important:
• When the HTTP port number is changed from 80,
enter the IP address of the camera after http://, for
example http://192.168.0.11.
• Configure the web browser to not use the proxy
server. Refer to the network administrator when
using the proxy server.
The following are descriptions of how to monitor images from the...

5
About the Live page
q[Live] button
Click this button to display the Live page. Refer to
page 7 for descriptions of how to operate the Live
page.
w [Setup] button *1
Click this button to display the setup menu.
e Multi-screen buttons
Click the desired multiscreen (1-4 or 5-8) button to
display images on a multiscreen.
r Image type buttons
Click the desired button to change the image type to
be displayed. The selected button will turn green.
t ZOOM buttons *2
Click the desire button to zoom in/out the...

6
!2One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
!3Main area
Images from the camera will be displayed in this
area.
*1 Operable by only users whose access level is 1.
Administrator 
*2 Operable by only users whose access level is 1.
Administrator or 2. Camera control when ON is
selected for User authentication (page 35).
*3 The access level to operate this button can be
changed by the settings of Authentication on the...

7
Switch colour of the dis-
played images between
colour and B/W *2Images will be displayed in B/W (black and white). 
Images will be displayed in colour. 
Zoom in/out of image *2
Change brightness *2
Open/close the AUX con-
nector *2The displayed image will be zoomed out.
Image will be darker.
The AUX connector will open.
The AUX connector will close. Image will be displayed with the standard brightness. 
Image will be brighter.  The zoomed image will return to the original size. 
The displayed image...

Turn on/off audio *3* The [Audio] button will be displayed only when ON is selected for M\
ic modeon the setup menu. ( page 26)
Display a still picture (one
shot)When this button is clicked, the button will turn into the 
button and audio will not be heard.
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the Live page will be dis-
played on it. 
To save this picture on a PC, right-click on the image and
select Save image as… on the displayed pop-up menu....

9
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multiscreen. Images from up to 4 cameras can be displayed
simultaneously. To display images on a multiscreen, it is necessary to register cameras in advance. 4 cameras can
be registered as a group and up to 2 groups (8 cameras) can be registered. (page 27)
Important:
Select OFF for both the user authentication and the host authentication of the camera to be registered. 
(pages 35 and 36)
Step 1
Click the...

10
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur.
Alarm type
Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector on the
rear of the camera, the alarm action will be performed when the connected alarm
device activated.
VMD alarm: When a motion is detected in the set VMD area, the alarm action will be performed.
* VMD stands for Video Motion Detection.
Command alarm: When received a command alarm from the connected device...