Panasonic Video Cassette Recorder Pv V4622 Operating Instructions

							11
3
Settings are made automatically.
When setup is done, this screen appears.
9 /29 / 20 0 2  SUN    2 : 20PMDST : ONSETT I NG  :   CH   10
AUTO  CLOCK  SET
     COMPLETED
VCR     C / A      CLOCK        CH
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock.
See right.
AUTO  CLOCK  SET  IS
INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
VCR     C / A       CLOCK       CH
Confirm the output channel of your
cable box or DSS receiver. Press  to
select the same channel as the cable
box or DSS receiver output channel.
Press 
 to enter. SELECT CONNECTION screen is
displayed.
Press 
* to select connection
“CABLE/ DSS BOX  VCR  TV” and
press  to set.
4
SELECT/
SET
ACTION
 :PLAY :STOP :REW :FF
Press ACTION on remote to
display CLOCK screen.
Manual Clock Set
Press   to select the month
and 
 to set. In the same
manner, select and set the
date, year, time, and DST
(Daylight Saving Time).
Press ACTION to start clock,
and go to step 4 above left.
a
b
c
If Auto Clock Set was incomplete. *Important:If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Initial Setup
(Connection)
SELE CT  MONTH
DST:ON1 /     /:
VCR     C / A      CLOCK        CH
SELECT   :            SET : 
EXIT        : ACT I ON     
SET COMPLETED
DST:ON  9 /29 / 2002 SUN  12:00PM
              START   : ACT I ON      SET         : 
     
VCR     C / A      CLOCK        CH
SELECT  CONNECTION
VCR  TVCABLE / DSS  BOX  VCR  TV
VCR  CABLE / DSS  BOX  TV
VCR  C / A   CLOCK     CHANNEL
SELECT   :            SET : 
EXIT        : ACT I ON     
SELECT  CONNECTION
CABLE / DSS  BOX  OUTPUT  CHCH  0 1
CABLE / DSS  BOX  VCR  TV
VCR  C / A   CLOCK     CHANNEL
SELECT   :            SET : 
EXIT        : ACT I ON     
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2811 
						

							12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Clock
1)Press   to select
CLOCK.
3)Press 
 and   to
select and set the
date, time, and DST
(Daylight Saving
Time).
4)Press ACTION to 
startthe clock and exit this
mode.
(“TIME ZONE ADJUST”
appears only when auto
clock is set.)
SEL.       :              REGLER:    QUITTER  : ACT I ON     
MAGNETO.   C / A    HORL.    CAREPRISE LECTURE       : NONHORODATEUR                 : OUIMESSAGE D’ ERREUR      : OUICOUPURE AUTO               : NONMAGNETO. /TELE AUTO :OUI
LANGUAGE/IDIOMA : FRANÇAIS
CA SORTIE : 3
ELEGIR  :              FIJAR :     
SAL I R    : ACT I ON     
VCR     C / A     RELOJ         CAREPETICION                      :INACTSELLO  DE  TIEMPO          :ACT
AVISO/CONT.REMOTO     :ACT
APAGADO AUTOMATICO :INACTVCR/TV   AUTO                 :ACT
LANGUE/LANGUAGE:ESPAÑOL
CANAL  DE  SALIDA  :3
Language
2)Press  repeatedly.
For English
For Spanish
For French
1)Press  to select
language item.
Press ACTION*
to display menu.
SELECT  :               
EXIT       : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT
- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
VCR       C / A    CLOCK       CH
Reset Language, Channels, Clock,                  VCR’s O
ANTENNA  :   CABLE
AUTO  SET
CHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
VCR  C / A   CLOCK     CHANNEL
SELECT   :               
EXIT        : ACT I ON     
Channels
1) Press   to
select CHANNEL.
2)Press 
 to select
“ANTENNA,” then
press 
 to set your
antenna system
 (“TV” or “CABLE”).
3)Press 
 to select
“AUTO SET,” then
press 
.
If you use Cable Box,
set it to the PBS channel
in your time zone.
After Channel Auto Set is
finished, Auto Clock Set
will be performed.
1
2
VCR  C / A   CLOCK     CHANNEL
SELECT   :               
EXIT        : ACT I ON     
ANTENNA  :   CABLE
AUTO  SET
CHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
2)Press  to select
“MANUAL,” and press
. (For Auto Clock Set,
select “AUTO CLOCK
SET.”)
3)Press ACTION to
exit.VCR       C / A    CLOCK       CH
SELECT :              SET : 
EXIT      : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT
- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
CH  AUTO  SET  PROCEEDING
CANCEL : STOP
VCR  C / A   CLOCK     CHANNEL
VCR       C / A    CLOCK       CH
SELECT :              SET : 
EXIT      : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT
- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
SELECT HOUR
9 /29 / 20 0 2  SUN    2 : --PMDST : ON
VCR     C / A       CLOCK       CH
SELECT   :            SET : 
EXIT        : ACT I ON     
AUTO  CLOCK  SET
MANUAL
TIME   ZONE  ADJUST   :  0 
VCR     C / A       CLOCK       CH
SELECT   :               
EXIT        : ACT I ON     
AUTO  CLOCK  SET
MANUAL
TIME   ZONE  ADJUST   :  0  VCR     C
 / A       CLOCK       CH
SELECT   :            SET : 
EXIT        : ACT I ON     
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2812 
						

							13
Time Zone Adjust
2)Press  to select
“TIME ZONE ADJUST.”
VCR’s Output
Channel
1)Press  to select
VCR’S OUTPUT CH.
REPEAT  PLAY             :OFFT I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT
- OFF       :OFFAUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
SELECT   :            SET : 
EXIT        : ACT I ON     
VCR       C / A    CLOCK       CH
2) Press .
3)Press ACTION.
After 3 seconds
REPEAT  PLAY             :OFFT I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT
- OFF       :OFFAUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :4
SELECT   :            SET : 
EXIT        : ACT I ON     
VCR       C / A    CLOCK       CH
To Make Corrections,
repeat steps 1) ~ 3).
1)Press   to select
CLOCK.
ADD/DLT NUMBER
keys
 :PLAY :STOP :REW :FF
POWER
SELECT/
SET
ACTION
CH 
 / 
*Important:If a remote control button does not
work when pressed, press the VCR
button on the remote and try the
button again.
(Only when Auto Clock is set.)
TV/VCR
VCR
3)Press ACTION.
“TIME ZONE ADJUST”
returns to “0” if clock is
set manually.
and press  to
subtract or add
hour(s) as necessary.
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH 
/ or
NUMBER keys and press ADD/DLT.
DST (Daylight Saving Time)
VCR auto adjusts clock for DST.
(p. 9.)
Spring (First Sunday in April)
DST:ON 
➛ ➛➛ ➛
➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON 
➛ ➛➛ ➛
➛ Turns clock back one hour.
If your area does not observe
Daylight Saving Time, select
DST:OFF.
Keep these time changes in mind
when programming VCR for
timer recordings.
CHANNEL  08  ADDED
CHANNEL  08  DELE TED
Basic
Operation
AUTO  CLOCK  SET
MANUAL
TIME   ZONE  ADJUST   :  0  VCR     C
 / A       CLOCK       CH
SELECT   :            SET : 
EXIT        : ACT I ON     
AUTO  CLOCK  SET
MANUAL
TIME   ZONE  ADJUST   :  0 
VCR     C / A       CLOCK       CH
SELECT   :               
EXIT        : ACT I ON     
IF   YOU   PRESS  ACTION 
KEY,   VCR ’ S   OUTPUT CH 
SWITCHES   TO   CH  4.        
VCR       C / A    CLOCK       CH
PLEASE   TUNE  YOUR  TV  TO   
CH  4.        
VCR       C / A    CLOCK       CH
k,                  VCR’s Output Channel
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2813 
						

							14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Playback a Tape
Rapid Rewind/ Fast Forward
(E.g., T-120 tape rewinds in approx. 1 minute.)
Press REW or FF in Stop mode.
Remove loose or
peeling labels from tapes
to prevent tape jam.
Insert a tape,VCR power comes on. “VCR” lights on Multi
Function Display. If Auto VCR/TV (p. 35) is
set to “OFF,” press VCR/TV until “VCR”
lights on the Multi Function Display.
Press PLAY to play tape.
If tape has no rec. tab (p. 4), auto play begins.
Special Features During Play
Press STOP
to stop tape.
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see “Manual Tracking
Control” on page 37.
After the VCR is in Still or Slow mode for 3 minutes,
it will switch to Stop mode automatically to protect
the tape and the video head.
1
2
3
PAUSE/
SLOW REW
STOP FF
EJECT
Multi Function Display
Insert a tape.2 1
Playback using VCR controls
Press PLAY.
Press STOP/EJECT to stop and/
or eject tape.
PLAY
Ready Checklist
All connections are made (p. 8, 10, 24).
TV and VCR are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR)
Forward/ Reverse scene search
➛ ➛➛ ➛
➛Press FF or REW.
➛ ➛➛ ➛
➛Press PLAY to release.
After search has begun, each additional press
of FF or REW changes speed as shown below.
[SLP] : Approx. 21X ↔ Approx. 43X
[LP] : Approx.   9X ↔ Approx. 15X
[SP] : Approx.   7X ↔ Approx. 13X
If picture is interrupted at 43X, 15X, or 13X
speed, speed changes to 21X, 9X, or 7X.
It may take a moment for 43X, 15X, or 13X search
to start while tape condition is being determined.
43X, 15X, or 13X search may not be possible
with some tapes.
Picture interruption may occur with some TVs.
FF and REW search speed may vary depending
on current tape position.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
Note
Notes
Notes
Notes
Rewind or FF starts after VCR detects tape
length. This may take a moment.
Rew/ FF speed slows down at start and end
portions of the tape.
Still (Freeze) picture
➛ ➛➛ ➛
➛Press PAUSE/SLOW.
➛ ➛➛ ➛
➛Press PLAY to release.
Frame by Frame picture
➛ ➛➛ ➛
➛Press PAUSE/SLOW in Still mode.
➛ ➛➛ ➛
➛Press PLAY to release.
Slow Motion picture
➛ ➛➛ ➛
➛Hold down PAUSE/SLOW in Still mode.
➛ ➛➛ ➛
➛Press PLAY to release.
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2814 
						

							15
Multi Function
Display
After 5 min. in Pause mode, VCR
stops to protect the tape and the
video head. Insert a tape with a record tab (p. 4).
1
5 4 2
3VCR power comes on.
“VCR” lights on Multi Function
Display. If Auto VCR/TV (p. 35) is set to
“OFF,” press VCR/TV until “VCR”
lights on the Multi Function Display.
Press CH 
* or NUMBER keys
to select the channel.
For “LINE” input, see p. 36.
For channel over 100, first press 100
key then the other 2 digits.
Press SPEED
to select the record speed (p. 4).
SP = Standard Play            LP = Long Play
SLP = Super Long Play
Press REC
to start recording.
To edit, press PAUSE/SLOW to pause,
and again to resume recording.
Press STOP
to stop recording.
One Touch  Recording (recording in progress),
VCR shuts off after the preset record length.
➛each press of REC adds 30 min. to the
recording length up to 4 hours.
Record one station, watch another,
➛press VCR/TV (“VCR” goes out on Multi
Function Display),
➛select channels at TV (recording
continues).
Select channels at VCR,
Other channels cannot be viewed during
recording.
➛press VCR/TV  (“VCR” lights up on Multi
Function Display),
➛select channels at VCR. This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the 
 mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
Record using VCR controls
Press STOP/
EJECT to stop.
CH CH 
SPEED
RECPAUSE/
SLOW
VCR/
TV
Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
Ready Checklist
All connections are made (p. 8, 10, 24).
TV and VCR are plugged in.
TV is on and tuned to CH3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR)
Speed appears on-screen and on Multi
Function Display.
Record on a Tape
*Important:If a remote control button does not work
when pressed, press the VCR button on
the remote and try the button again.
5
STOP
2Select
Channel.1Insert
a tape.4Press REC
to start
Recording.
Note
Note
Basic
Operation
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2815 
						

							16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording
Press PROG/VCR+* button
to display PROGRAM.
Press PROG/VCR+
button to end the program. 2) To set remaining
items, press 
 to
select and press  to
set START/ STOP
times, CH (channel)
or LINE input (p. 36),
Category** and tape
speed (SP, LP, SLP).
3 2 1
4
1) Set record DATE,
press 
 to select:
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each week and press
 to set.
See selection order
below left. Press 
to display Program
screen.
Example
5
Today
VCR Plus+        PROG.         LIST
13  SAT  --:--  --:--   --TODAY
CATEGORY : N/A                 SLP DATE START
ST
OPCH
SELECT :              EXIT        : PROG 
VCR Plus+        PROG.         LIST
SELECT :              END         : PROG 
DATE START
STOPCH
SET:SELECT START DATET
ODAY13  SAT  --:--  --:--   --
CATEGORY : N/A                  SLP
POWER
SELECT/
SET
 :PLAY :STOP :REW :FF
PROG/
VCR+
Ready Checklist
All connections are made (p. 8, 10, 24).
TV and VCR plugged in and turned on.
VCR/TV selector set to “VCR.”
Clock set correctly.
Tape has rec. tab (p. 4).
Remote is in VCR mode. (Press VCR)
Press PROG/VCR+
button again to exit. To Enter More Programs,
press 
 to select and
press 
 to set an unused
program number and
repeat step 3.
Or
Press POWER off
to set the Timer Recording.
(“TIMER” lights up on Multi Function Display.)
If a power interruption occurs
while programming the timer, the
timer program(s) may be canceled.
If “TIMER PROGRAMS WERE LOST
DUE TO  POWER  INTERRUPTION”
appears on-screen, please reenter
the timer programs. If you are using a Cable Box,
VCR Timer  Programming  Channel
(Step 3) must be set to the Cable
Box output channel and your
Cable Box must be manually set
to the desired channel. The Cable
Box must be left on.**Category Items
N/A (not applicable),
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA
DAILY132 1 31
1214    15
SELECT     /      Selection Order
WEEKLY
(SAT)WEEKLY
(MON)WEEKLY
(SUN)
VCR Plus+        PROG.         LISTDT   START     STOP    CH   SPD13     2 : 00 P    3 : 20P   02    SLP--  -- : --    -- : --   --   --
--  -- : --    -- : --   --   --
--  -- : --    -- : --   --   --
CANCEL   : ADD / DLT SELECT   :              SET :EXIT         : PROG
VCR/
TV
Notes
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2816 
						

							17
Press POWER and then press
STOP within 10 seconds to
cancel the Timer Recording.
(The TIMER indicator goes out
on Multi Function Display.)
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:
(Recording is not in progress)
Press to select number.
Press ADD/DLT.
or
Important notes when using a DSS receiver
When recording programs via a DSS receiver, the DSS receiver
must be left on.
When recording programs via an antenna or cable, the DSS
receiver must be turned off.
ADD/DLT SELECT/
SET
 :PLAY :STOP :REW :FF
PROG/
VCR+
VCR Plus+        PROG.         LIST
SELECT   :       EXIT         : PROG
DT   START     STOP    CH   SPD  7     9 : 00A  12 : 00A   08      SP  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
1
2
3
4
1)Press
PROG/VCR+ button.
2)Press 
 to select LIST.
To cancel a Timer
Recording in progress...
1)Press to display.
2) Repeat Step 3 (p.16)
to set new programs.
Press PROG/VCR+ button
to end the programming.
If there are set programs, press POWER off
to set timer.
*Important:If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
VCR Plus+        PROG.         LISTDT   START     STOP    CH   SPD  7     9 : 00A  12 : 00A   08      SP  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
CANCEL   : ADD / DLT SELECT   :              SET :EXIT         : PROG
VCR Plus+        PROG.         LISTDT   START     STOP    CH   SPD--  -- : --    -- : --   --   --  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
CANCEL   : ADD / DLT SELECT   :              SET :EXIT         : PROG
VCR Plus+        PROG.         LISTDATE START
STOPCH
SELECT START DATET
ODAY  7  SUN   9:00A  12:00A  08
CATEGORY : N/A                     SP
SELECT  :             END        : PROG SET:
Timer
Recording
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2817 
						

							18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording Using VCR Plus+   System
1
Auto VCR Plus+ System Channel Setup (Part 1)
Press ACTION*
to display menu.
Press 
 
to select CHANNEL.
Press 
to select VCR Plus+
CH SET UP and
press 
 to display.
Make sure to leave VCR
off (overnight). In order for VCR to read PlusCode numbers, some set
up is required. Guide channel numbers are assigned to
each local broadcast and cable station. Because this
number sometimes differs from the channel your TV
receives the station on, it is necessary to program the
VCR with local channel information. To receive VCR
Plus+ channels automatically, perform the steps below.
Or, see “Manual VCR Plus+ System Channel Setup”
section on page 20.
Press ACTION to
return to normal screen. Press 
to select When to
Update and
press 
 to set. Press 
  
to enter Zip Code and
enter each number.
Press 
 or ACTION to
set.
Important Note
“Initial Setup” on pages 8 ~ 11
must be completed before “Auto
VCR Plus+ System Channel
Setup” can be done. If any part of
setup is incomplete, a warning
screen appears.
When Auto Set is performed,
channels set in initial setup (pp. 8
~ 11) will be replaced by
automatically downloaded data.
Make each entry within 1 minute or
VCR will leave this mode.
Once local channels have been
programmed, they will stay in
memory, even in the case of a power
failure.
If the start time for a timer recording
comes up during Auto VCR Plus+
System Setup, the timer recording
will have priority.
VCR Plus+ System is ...a feature that allows you to set most
items of a timer recording by simply
entering a special code number
(PlusCode programming number)
found in TV GUIDE and selected
newspaper TV listings.
ACTION SELECT/
SET
 :PLAY :STOP :REW :FF
2
3
4
5
6
7
Press 
to select AUTO SET
and
press 
 to set.
SELECT  :               
EXIT       : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
VCR       C / A    CLOCK       CH
VCR  C / A   CLOCK     CHANNELANTENNA  :   CABLE
AUTO  SETCHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
SELE
CT :              SET : 
EXIT      : ACT I ON     
ANTENNA  :   CABLE
AUTO  SETCHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
VCR  C / A   CLOCK     CHANNEL
SELECT   :               
EXIT        : ACT I ON     
VCR  C / A   CLOCK     CHANNELAUTO  SET
MANUAL
SELE
CT :              SET : 
EXIT      : ACT I ON     
VCR  C / A   CLOCK     CHANNEL
PLEASE  ENTER  Z I P  CODE
Z I P  CODE :  -----
SELECT  :              SET : 
EXIT       : ACT I ON     
VCR  C / A   CLOCK     CHANNEL
SELECT  :              SET : 
EXIT       : ACT I ON     
PLEASE  SELECT  HOW  OFTEN
TO  UPDATE
  R I GHT  NOW
  EVERY  NIGHT
  EVERY  MONDAY  NIGHT
VCR  C / A   CLOCK     CHANNEL
 END         : ACT I ON       
 PLEASE   LEAVE   VCR   OFF 
  
For  [VCR-TV] or [VCR-cable box-TV] connection only.
Notes
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2818 
						

							19
Auto VCR Plus+ System Channel Setup (Part 2)
Press    to
select channel map for
your area and press
ADD/DLT to set.
Before you perform the following steps, you
should have:
completed “Auto VCR Plus+ System
Channel Setup (Part 1)” on page 18.
left VCR off overnight, and turned it back on
after 9:00 AM the next day.
If channel updating wassuccessful...If VCR could notdistinguish channel map...
Press ACTION
to exit this mode.Press ACTION
to display SELECT
VCR Plus+ CH.
Continue with step 2.ACTION SELECT/
SET
 :PLAY :STOP :REW :FF
ADD/DLT
To Change or Update Auto VCR
Plus+ System Channel Setup
(E.g. you selected wrong channel
map or zip code.)
aDo “Auto VCR Plus+ System
Channel Setup (Part 1)” steps
1~4 on page 18.
bPress 
 to select UPDATE
VCR Plus+ CH or SELECT VCR
Plus+ CH, then press 
.
c
If you selected UPDATE VCRPlus+ CH, perform steps 5~7 in
the “Auto VCR Plus+ System
Channel Setup (Part 1)” section
on page 18.
If you selected SELECT VCRPlus+ CH, perform steps 2~3 in
the “Auto VCR Plus+ System
Channel Setup (Part 2)” section
on this page.
Press ACTION
to return to normal
screen.
Make sure to leave
VCR off (overnight).
Repeat these steps as necessary.
If Auto Setup fails, do “Manual VCR Plus+
System Channel Setup” on page 20. Channel map will be updated (overnight).
If it was successful, “VCR Plus+ CH SET
COMPLETED” appears on screen.
Press ACTION to exit.
1
2
3
VCR  C / A   CLOCK     CHANNEL
 END         : ACT I ON      VCR  Plus+  CH  SET
COMPLETED
VCR  C / A   CLOCK     CHANNEL
 NEXT        : ACT I ON      PLEASE  SELECT
VCR  Plus+  CHANNEL
VCR  C / A   CLOCK     CHANNEL     SELECT     VCR  Plus+  CH
   KABC   CNN  ESPN  KNBC
        12       13        14        15 
        51       42        18        33
          1         5        10          7
      101       99      110        78
  
SELE
CT     :               
SET           : ADD / DLT
EXIT          : ACT I ON     
VCR  C / A   CLOCK     CHANNEL
UPDATE  VCR  Plus+  CHSELECT  VCR  Plus+  CH  
SELE
CT :              SET : 
EXIT      : ACT I ON     
*Important:If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Timer
Recording
VCR  C / A   CLOCK     CHANNEL
 END         : ACT I ON       
 PLEASE   LEAVE   VCR   OFF 
  
System
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2819 
						

							20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
For [VCR
➛ ➛➛ ➛
➛TV] or [VCR
➛ ➛➛ ➛
➛cable box
➛ ➛➛ ➛
➛TV] connection only.
To enter VCR Plus+
channels,
press 
 to move cursor to
right, press  to enter
number, press 
  to set,
and press 
 to scroll up/
down. Press ACTION*
to display menu.
Manual VCR Plus+ Channel Setup
5
To complete step 5 of setup,
do the following:
Prepare a TV/Cable station line-up and
channels they are received on. Also, the
Guide channel numbers assigned to
your stations (found in TV Guide and
selected newspapers.)
Make a 3-column chart (see sample).
Left column ➛ all stations you receive.
Middle column ➛each station’s assigned
Guide channel number
from TV Guide, etc.
Right column ➛channel number on
which your TV receives
the station.
Press  
to select CHANNEL.
Press 
to select VCR Plus+ CH
SET UP, and press  to
set.
Repeat step 5 until list is
complete.
Press ACTION twice
to return to normal screen.
To Make Corrections,
press  and  to move to error, then  to
change, or ADD/DLT to erase number.
2
3 1
ANTENNA  :   CABLE
AUTO  SETCHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
SELE
CT :              SET : 
EXIT      : ACT I ON     
VCR  C / A   CLOCK     CHANNEL
SELECT  :               
EXIT       : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
VCR       C / A    CLOCK       CH
CLEAR    : ADD/DLT
SELECT  :               SET:   
EXIT       : ACT I ON     
GUIDE CH          RECEIVE  CH01                             --02                             --03                             --
VCR  C / A   CLOCK     CHANNEL
Initial Setup.....In order to use Timer Recording Using VCR Plus+ System, the Initial Setup on page 8 to 11 must
be completed for setting Clock and Channel.
Channel Setup.....Since numbers assigned to channels found in TV Guide and selected newspapers may differ from
channels in your viewing area, you’ll need to enter your local TV channel number for each
corresponding Guide Channel.
If you perform the VCR Plus+ Channel set up procedures shown below, you will be able to perform
timer recordings using the PlusCode programming number listed in your local TV listing.
6
Assigned Guide
channel No.
15
20
04
Broadcast or Cable
station name
HBO
Nickelodeon
CBS
FOX
SAMPLE ONLY
33
38
04
11
Channel No. on
which my TV
receives the station.
Timer Recording Using  VCR Plus+    System (continued)
GUIDE CH          RECEIVE  CH
01                             --02                             --03                             --
VCR  C / A   CLOCK     CHANNEL
ANTENNA  :   CABLE
AUTO  SETCHANNEL  CAPTION
WEAK  SIGNAL   DISPLAY : OFF
CABLE/DSS  BOX  SET  UP
VCR  Plus+  CH  SET  UP
VCR  C / A   CLOCK     CHANNEL
SELECT   :               
EXIT        : ACT I ON     
Press 
to select MANUAL, and
press  to set.
VCR  C / A   CLOCK     CHANNELAUTO  SET
MANUAL
SELE
CT :              SET : 
EXIT      : ACT I ON     
4
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:2820