Panasonic Video Cassette Recorder Pv V4622 Operating Instructions

31
 Auto Play
Insert a tape 
➛ ➛➛ ➛
➛ Power comes on,
➛ ➛➛ ➛
➛ Play starts if there is no record tab
(see p. 4).
 Auto Rewind
Play
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play, 
➛ ➛➛ ➛
➛ Tape end, 
➛ ➛➛ ➛
➛ Rewind,
➛ ➛➛ ➛
➛ Tape ejects if there is no record tab REW
FF PLAY
SEARCH
M/A SKIP
NUMBER
keys
CA/ZERO
Press ACTION
to return to normal screen. Press ACTION
to display menu.
Press to select REPEAT
PLAY and press 
to set ON or OFF.
Set to playback a recording over and over.
3 2 1
ON:...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
5 43 2 1
Press to enter CAPTION
and press 
 to
set.
Channels already set and channels deleted
from Channel Memory are not displayed.
You can set a total of ten channel captions.
Do “Preset Caption” steps 1~3 on
left.
Characters
change in
following order.
Repeat steps 3 and 4 as desired.
To make corrections,
Press 
  to move to the incorrect entry,
then press  to make correction.
Or, press ADD/DLT...

33
*Important:If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
ACTION
ADD/ DLT SELECT/
SET
 :PLAY :STOP :REW :FF
If Multi-brand feature is used (p. 22), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV, DSS, or Cable
mode.
321
Press ACTION
to display menu.
Press 
to select REMOTE
WARNING and
press 
 to set ON
or OFF.
If “OFF,” remote warning will not appear if
invalid key is pressed.
Press ACTION...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
To find out the present tape position and amount of tape remaining.
Tape position is displayed for VHS-C type Cassettes, tapes
under 30 minute long, and some other tapes, but the
position is not correct.
Tape remaining time display may not be
precise.
1
BEG I N                END
                                                SP
                                 R 120 M
 I  N.
“DETECTING TAPE...

35
*Important:If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
The VCR VCR/TV selection can be set to
auto or manual.
Press ACTION
to return to normal screen.
31
Press ACTION
to display menu.
SELECT  :               
EXIT       : ACT I ON     
REPEAT  PLAY             :OFF
T I ME  STAMP               :ON
REMOTE WARNING     :ON
AUTO  SHUT- OFF       :OFF
AUTO  VCR/TV             :ONIDIOMA/LANGUE : ENGLISHVCR’ S  OUTPUT CH    :3
VCR       C...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Copying Your Tapes  (Dubbing)
1Insert pre-recorded tape.
2
Insert blank tape with record tab.
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
3
4Press PLAY to start dubbing.
Playing VCR starts playback.Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Caution: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright...

37
Power Source:120 V AC, 60 Hz
Power Consumption:
Power On
Approx. 23 watts
Power Off
Approx. 3.0 watts
Video Signal:EIA Standard NTSC color
Video Recording System:4 rotary heads helical
scanning system
Audio Track:1 track (Normal)
2 channel (Hi-Fi Audio
Sound)
Tuner:
Broadcast Channels:VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels:Midband A through I (14 ~ 22)
Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)Special CABLE channel 5 A (01)Ultraband 65 ~ 94, 100 ~ 125...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Warning and Instruction Displays
OSD
If you attempt to set or
review a Timer
Recording and the
Clock is not set...
After a Timer Program
has been set...
If you press REC on
the remote control or
VCR, and a cassette is
inserted with no record
tab...
If you press PLAY, FF,
REW, or REC on the
remote control or VCR
without a cassette
inserted...
If you press POWER
or STOP during a
Timer Recording......

39
Before Requesting Service
Power
No power…
Recording & Playback
TV program cannot be recorded...
Timer recording cannot be performed…
There is no playback picture, or the playback
picture is noisy or contains streaks...
During special effects playback, picture may
contain some vertical jitter when using a TV
with an Automatic Vertical Hold Control...
VCR cannot be controlled...
Check the following points if you are having trouble with your VCR.
Correction
Completely insert Power Plug into an AC...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Panasonic VHS VCR  Products
Limited Warranty
Limited Warranty  Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the char t below,
which starts with the date of original purchase (“warranty...