Panasonic Video Cassette Recorder Pv V4622 Operating Instructions

21
To Make Corrections,
press  repeatedly
to delete number, then
repeat step 3.
Press PROG/VCR+
button to display
PROGRAM.
Press PROG/VCR+
button to end program.
VCR Plus+ System Programming
Press  
to select display VCR
Plus+ screen.
Press NUMBER keys
to enter PlusCode number
and press PROG/VCR+
button to set.
Press 
to select ONCE,
DAILY(MON~FRI), or
WEEKLY record
frequency and press
PROG/VCR+ button to set.
Press 
to select category and
recording speed.
Press 
 to set.
7 32 1
4
5
6
Do normal Timer...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
The Remote Control can be set to control some TV and
Cable box/DSS functions.
Find your TV and Cable Box/DSS Receiver Brand
Code Number on the following page.
Setup for TV control,
➛ ➛➛ ➛
➛hold down TV button,
➛ ➛➛ ➛
➛enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,
➛ ➛➛ ➛
➛press POWER to turn selected unit on or off.
See table below for...

23
Advanced
Operation
Due to changes in infra-red commands used by manufacturers, some brands have several
codes. If your unit does not respond to the first code, please try the next one.
Some TV, Cable Box and DSS Box brands require you to turn on the power manually.
Cable Box Brand Code Numbers
Panasonic ........................ 01, 02
Quasar............................. 01, 02
RCA ....................................... 03
GE ......................................... 03...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
You Cannot
Advanced Connections
You Can
record and view
both scrambled
and unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.view channel
other than the
one selected
for any type of
recording.
do a Timer
recording of a
channel unless
you select it at
the cable box.
view any
(including
scrambled)
channel.
use...

25
MONO broadcastNormal monaural sound broadcast.
SAP broadcastSecondary Audio Program (sub language)
broadcast. Select SAP audio mode for the
sub language.
MTS Stereo broadcastMulti-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
If stereo broadcast is weak and display
flickers, select MONO audio mode for
possibly better results.
MTS Stereo and SAP broadcastMulti-channel Television Sound Stereo (main
language) and Secondary Audio Program
(sub language) broadcasts are  being...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
 Marking
When C/A RECORD: ON, VCR automatically rewinds the
tape after a recording has been made and marks the
beginning and end of any detected commercial blocks.
After marking is done, the tape is returned to the end of
the recording. Commercials are not erased from the tape.
Press ACTION*
to display menu.
Press  to select C/A and display
SET UP COMMERCIAL
ADV.
Press 
to select C/A RECORD
and press...

27
 Playback
When playing back a recording which has been
marked using the  feature, you
can either set VCR to automatically advance through
marked commercial blocks, or set it so that
commercials are only skipped on your command.
AUTO :VCR will automatically advance through
marked commercial blocks recorded on the
tape and then resume playback.
MANUAL :VCR will advance through commercials only
when CA/ZERO is pressed. Playback will
resume when the end mark of a commercial
block is found, or a new...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
The most commonly asked questions about  are answered below.
Question
How fast does the VCR advance
through commercials?
Are commercials advanced through only
when I playback a recording?
Are commercials still recorded on the
tape in case I choose to view them
sometime?
Does 
 work in
all recording speeds?
Does the VCR advance through
commercials each time I playback tapes...

29
 helps you locate certain
parts of prerecorded movies (rented or
purchased). The feature works in two ways.
 You can go to the beginning of the movie.
 You can skip from one preview to the next.
 works only on tapes
recorded in SP speed with the record tab
removed.
1
2Start preview searching.
When a preview is detected, VCR
will start playback.
To Search for Preview.
Start next preview searching. 1) In step 3 at left, select GO
TO PREVIEW.
2)Press FF.
Press SEARCH/ M/A SKIP.
To cancel, press STOP....

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
 To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: 
 indicates start points of each recording.
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
6157234
17534 62
Tape Operation (continued)
Search System
For each recording, an invisible index...