Panasonic Vdr D310 Operating Instructions Manual

							71LSQT1145
Editing
Editing
Editing scenes
(RAM) (-RW‹VR›)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW (Video format) and DVD-
R cannot be deleted.
¬Rotate the mode dial to select  .
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
¬Rotate the mode dial to select  .
1Press the   button in the 
thumbnail display. 
2Select [SELECT] or [ALL] and 
press the joystick.
≥When [ALL] is selected, the following scenes 
will be deleted. Proceed to step 5.
jWhen [PLAY MODE] is set to [VIEW ALL]: 
All the scenes on the disc
jWhen [PLAY MODE] is set to [BY DATE]: All 
the scenes selected by date
3(Only when [SELECT] is selected in step 2)
Select the scene to be deleted, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 8 scenes displayed on a page can be set 
in succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥You can also delete scenes by pressing the 
MENU button, selecting [EDIT SCENE] # 
[DELETE] and then selecting [SELECT] or 
[ALL].
≥To delete an unwanted part of a scene, divide 
the scene first, and then delete the 
unnecessary part. (l72)
≥In case of [ALL], the deletion may take time if 
there are many scenes on the disc.
Deleting scenes
This is for deleting scenes recorded 
on discs.
Deleting scenes one at a time
Deleting multiple scenes from the 
thumbnail display
LSQT1145.book  71 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							72LSQT1145
Editing
≥Do not turn off this unit while deleting.
≥When you delete scenes, use a battery with 
sufficient battery power or use the AC adaptor.
≥It may not be possible to delete scenes that 
have been divided. Combine the divided 
scenes, and then delete them.
(RAM) (-RW‹VR›)
To delete an unnecessary portion of a scene, first 
divide the scene and then delete the 
unnecessary portion.
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [EDIT SCENE] # [DIVIDE] 
# [YES] and press the joystick.
2Select the scene to be divided, 
then press the joystick.
The selected scene is played back.
3When you reach the area where 
you want to divide the scene, move the joystick down to set the 
dividing point.
≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point 
where you want to divide the scene. (l66)
4When the confirmation message 
appears, select [YES], then press 
the joystick.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [EDIT SCENE] # 
[COMBINE] # [YES] and press 
the joystick.
Dividing a scene
This is for dividing a scene into two.
MENUCombining scenes
This function is only for combining 
two consecutive scenes into one.
MENU
LSQT1145.book  72 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							73LSQT1145
Editing
2Select the scene to be combined, 
then press the joystick.
≥The selected scene and the next scene are 
combined.
≥If you wish to combine scenes that are not next 
to each other or scenes with different recording 
dates, first create a playlist and then combine 
the scenes on the playlist. (l73, 77)
3When the confirmation message 
appears, select [YES], then press 
the joystick.
To continue combining other scenes
Repeat steps 2-3.
To complete editing
Press the MENU button.
Using playlists
You can create a playlist by gathering your 
favorites from the recorded scenes.
Since the playlist is not created by copying data, 
you will consume little of the disc capacity by 
making a playlist.≥If you create or delete playlists, the original 
scenes will not be modified. Editing scenes on 
a playlist will not affect the original scenes.
ARecorded scenes
BPlaylist
≥The maximum number of items on a disc (per 
side)
jPlaylists: 99
jPlaylist scenes: 999
≥If original scenes are deleted, the portion of 
playlists created with these scenes is also 
deleted.
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [PLAY SETUP] # 
[PLAYLIST] # [CREATE] and 
press the joystick.
What is a playlist?
Creating a new playlist
A
B
MENU
LSQT1145.book  73 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							74LSQT1145
Editing
2Select the scene to be added to 
the playlist, then press the 
joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
≥The scenes are registered in the playlist in the 
order that they were selected. After creating a 
playlist, the order of the scenes in it can be 
changed with the [MOVE] function. (l76)
3Press the MENU button.
4When the confirmation message 
appears, select [YES], then press 
the joystick.
The thumbnail view screen of the created playlist 
is displayed.
To add another scene to the same 
playlist
Select [ADD]. (l75)
To playback a playlist
Select the scene to start playback, then press the 
joystick.
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [PLAY SETUP] # [PLAYLIST] # [VIEW LIST] and 
press the joystick.
2Select the playlist to be played 
back, then press the joystick.
Scenes in the selected playlist are displayed as 
thumbnails.
3Select the scene to start 
playback, then press the joystick.
To select a different playlist
Press the MENU button, then select 
[PLAYLIST VIEW] and press the joystick.
To return to showing the original scenes
Press the MENU button, then select [END] and 
press the joystick.
(RAM) (-RW‹VR›)
Editing scenes on a playlist will not affect the 
original scenes.
Playing back a playlist
Editing a playlist
MENU
LSQT1145.book  74 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							75LSQT1145
Editing
≥Deleting scenes on a playlist will not affect the 
original scenes.
∫Deleting scenes one at a time
¬Select playlist playback mode. (l74, 
steps 1 and 2)
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
∫Deleting multiple scenes from 
the thumbnail display
¬Select playlist playback mode. (l74, 
steps 1 and 2)
1Press the   button in the 
thumbnail display. 
2Select [SELECT] or [ALL] and 
press the joystick.
≥When [ALL] is selected, the selected playlist 
will be erased. Proceed to step 5.
3(Only when [SELECT] is selected in step 2)
Select the scene to be deleted, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 8 scenes displayed on a page can be set 
in succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥You can also delete scenes by pressing the 
MENU button, selecting [EDIT] # [DELETE] 
and then selecting [SELECT] or [ALL].
≥Deleting scenes on a playlist will not increase 
the remaining capacity for recording.
≥The playlist itself is deleted if you delete all the 
scenes in it.
≥When a playlist is deleted, the number of each 
subsequent playlist decreases by one.
≥It may not be possible to delete scenes that 
have been divided. Combine the divided 
scenes, and then delete them.
¬Select playlist playback mode. (l74, 
steps 1 and 2)
Deleting scenes
Adding scenes to playlist
LSQT1145.book  75 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							76LSQT1145
Editing
1Press the MENU button, then 
select [EDIT] # [ADD] # [YES] 
and press the joystick.
2Select the scene to be added, 
then press the joystick.
The selected scene is encircled by a red frame.
≥When the joystick is pressed again, the 
selected scene will be canceled.
≥Up to 50 scenes can be set in succession.
≥The scenes are added to the playlist in the 
order that they were selected. The order of the 
scenes in the playlist can be changed by 
[MOVE] function. (l76)
3Press the MENU button.
4When the confirmation message 
appears, select [YES], then press 
the joystick.
The thumbnail view screen of the playlist that 
scenes were added to is displayed.
To continue adding scenes to the 
playlist
Repeat steps 1-4.
The scenes in a playlist can be moved.
¬Select playlist playback mode. (l74, 
steps 1 and 2)
1Press the MENU button, then 
select [EDIT] # [MOVE] # [YES] 
and press the joystick.
2Select the scene to be moved, 
then press the joystick.
The selected scene is encircled by a red frame, 
and the position to insert is shown by a yellow 
bar.
3Select the position to insert the 
scene, then press the joystick.
To continue moving other scenes in the 
playlist
Repeat steps 2-3.
To complete editing
Press the MENU button.
You can divide a scene into two parts.
≥Dividing scenes on a playlist will not affect the 
original scenes.
¬Select playlist playback mode. (l74, 
steps 1 and 2)
Moving scenes
MENU
Dividing a scene
MENU
LSQT1145.book  76 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							77LSQT1145
Editing
1Press the MENU button, then 
select [EDIT] # [DIVIDE] # [YES] 
and press the joystick.
2Select the scene to be divided, 
then press the joystick.
The selected scene is played back.
3When you reach the area where 
you want to divide the scene, 
move the joystick down to set the 
dividing point.
≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point 
where you want to divide the scene. (l66)
4When the confirmation message 
appears, select [YES], then press 
the joystick.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.Two consecutive scenes can be combined into 
one.
≥Combining scenes on a playlist will not affect 
the original scenes.
¬Select playlist playback mode. (l74, 
steps 1 and 2)
1Press the MENU button, then 
select [EDIT] # [COMBINE] # 
[YES] and press the joystick.
2Select the scene to be combined, 
then press the joystick.
≥The selected scene and the next scene are 
combined.
3When the confirmation message 
appears, select [YES], then press 
the joystick.
To continue combining other scenes
Repeat steps 2-3.
To complete editing
Press the MENU button.
MENU
Combining scenes
MENU
LSQT1145.book  77 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							78LSQT1145
Editing
Editing still pictures 
(VDR-D310/VDR-D230)
(SD)
The deleted files cannot be restored.
¬Rotate the mode dial to select  .
1Press the   button during 
playback.
2When the confirmation message 
appears, select [YES], then press 
the joystick.
¬Rotate the mode dial to select  .
1Press the   button in the 
thumbnail display. 
2Select [SELECT] or [ALL] and 
press the joystick.
≥When [ALL] is selected, all files on the SD card 
except the locked files will be erased. Proceed 
to step 5.
3(Only when [SELECT] is selected in step 2)
Select the file to be deleted, then 
press the joystick.
The selected file is encircled by a red frame.
≥When the joystick is pressed again, the 
selected file will be canceled.
≥Up to 8 files displayed on a page can be set in 
succession.
4(Only when [SELECT] is selected in step 2)
Press the   button.
5When the confirmation message 
appears, select [YES], then press 
the joystick.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
∫Deleting still picture files recorded on an 
SD card by other products
A still picture file (other than JPEG) that cannot 
be played back on this unit may be erased.
≥You can also delete files by pressing the 
MENU button, selecting [PICT. SETUP] # 
[DELETE] and then selecting [SELECT] or 
[ALL].
≥In case of [ALL], the deletion may take time if 
there are many files on the SD card.
≥Do not turn off this unit while deleting.
≥When you delete files, use a battery with 
sufficient battery power or use the AC adaptor.
≥Do not remove the SD card while deleting.
Deleting still pictures
This is for deleting still picture files 
recorded on SD cards.
Deleting files one at a time
Deleting multiple files from the 
thumbnail display
LSQT1145.book  78 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							79LSQT1145
Editing
≥If files conforming to DCF standard are 
deleted, all the data related to the files will be 
deleted.
(SD)
Still picture files recorded on an SD card can be 
locked so that they are not deleted by mistake. 
(However even if you lock some files on an SD 
card, formatting the card will delete all the files.)
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [PICT. SETUP] # [LOCK] 
# [YES] and press the joystick.
2Select the file to be protected, 
then press the joystick.
[ ] display appears and the selected file is 
locked.
≥Press the joystick again to release the lock 
setting.
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.(SD)
You can write the data of the still pictures to be 
printed and the number of prints (DPOF data) 
onto the SD card.
¬Rotate the mode dial to select  .
1Press the MENU button, then 
select [PICT. SETUP] # 
[DPOF SET] # [SET] and press 
the joystick.
2Select the file to be set, then 
press the joystick.
The number of prints set to be in DPOF is 
displayed.
3Move the joystick up or down to 
select the number of prints, then 
press the joystick.
≥You can select from 0 to 999. (The selected 
number of pictures can be printed with the 
printer supporting DPOF.)
≥To cancel the setting, set the number of prints 
to [0].
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
Locking still pictures
This is for preventing still picture files 
from being deleted by mistake.
MENU
DPOF setting
This is for writing the printing data on 
an SD card.
MENU
LSQT1145.book  79 ページ  ２００６年１２月２８日　木曜日　午前９時３４分 
						

							80LSQT1145
Editing
To cancel all DPOF settings
Press the MENU button, then select 
[PICT. SETUP] # [DPOF SET] # 
[CANCEL ALL] and press the joystick.
≥When the confirmation message appears, 
select [YES], then press the joystick.
∫What is DPOF?
DPOF stands for Digital Print Order Format. This 
enables picture printing information to be written 
onto an SD card so that it can be used on a 
system supporting DPOF.
≥The DPOF setting can be established for up to 
999 files.
≥DPOF setting made on other devices may not 
be recognized by this unit. Please perform the 
DPOF settings on this unit.
≥You cannot add the recording date to pictures 
to be printed with the DPOF settings.
LSQT1145.book  80 ページ  ２００６年１２月２８日　木曜日　午前９時３４分