Panasonic Vdr D100 Operating Instructions Manual

							81LSQT0969
Editing
Editing still pictures (VDR-D200 only)
(SD)
Still picture files recorded on an SD card can be locked so that they may not be deleted by mistake. 
(However even if you lock some files on an SD card, formatting the card will delete all the files.)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [ LOCK] # [YES] and press 
the joystick.
2 Select the file to be protected, then press the 
joystick.
[ ] display appears and the selected file is locked.
≥Press the joystick again to release the lock setting.
≥To lock other files, repeat step 2.
To complete the settings
Press the MENU button.
Locking still pictures
This is for preventing still picture files from being deleted by mistake.
D200(P_PC)eng.book  81 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							82LSQT0969
Editing
Editing still pictures (VDR-D200 only)
(SD)
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD 
card.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[PLAYSETUP] # [ DPOF SET] # [SET] and 
press the joystick.
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then 
press the joystick.
≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer 
supporting DPOF.)
≥To cancel the setting, set the number of prints to [0].
≥To set other files, repeat steps 2–3.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select [ PLAY SETUP] # [ DPOF SET] # [CANCEL ALL] and 
press the joystick.
≥When the confirmation message appears, select [YES], then press the joystick.
∫What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written 
onto an SD card so that it can be used on a system supporting DPOF.
≥The DPOF setting can be established for up to 999 
files.
≥DPOF setting made on other devices may not be 
recognized by this unit. Please perform the DPOF 
settings on this unit.≥You cannot add the recording date to pictures to be 
printed with the DPOF settings.
DPOF setting
This is for writing the printing data on an SD card.
D200(P_PC)eng.book  82 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							83LSQT0969
Disc and card management
Formatting discs and cards
Disc and card management
Formatting discs and cards
(RAM) (-RW‹VR›) (-RW‹V›)
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[FORMATDISC] # [YES] and press the joystick.
≥When formatting a DVD-RAM, skip to step 3.
2(When formatting a DVD-RW only)
Select format type (l20), then press the joystick.
3 When the confirmation message appears, select [YES], then press the 
joystick.
≥When formatting is complete, press the MENU button to exit the message screen.
≥During formatting, do not turn this unit off.
≥When you format the disc, use a battery with 
sufficient battery power or the AC adaptor.
≥In the case of a double sided disc, format each side.
≥It may not be possible to format a disc with many 
scratches or dirt. Such discs cannot be used.≥(Formatting DVD-RAM)
We recommend formatting on this unit. 
If formatting on a computer, use the supplied 
software. (VDR-D200 only) For more details, refer 
to the operating instructions of the software.
If you connect this unit to a computer to format a 
DVD-RAM, you cannot use DVDForm to physically 
format it. Use a separate DVD-RAM drive to 
physically format a DVD-RAM.
≥(Formatting DVD-RW)
Format on this unit.
Formatting discs
This is for initializing discs.
D200(P_PC)eng.book  83 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							84LSQT0969
Disc and card management
Formatting discs and cards
(SD)
Please be aware that if an SD card is formatted, then all the data recorded on the card will be 
erased. Store important data on a computer, etc.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[ FORMAT CARD] # [YES] and press the joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
≥When formatting is complete, press the MENU button to exit the message screen.
≥During formatting, do not turn this unit off.
≥When you format the SD card, use a battery with 
sufficient battery power or the AC adaptor.
≥Use this unit to format SD cards. If an SD card is 
formatted on other products (such as a computer), 
the time spent for recording may become longer 
and you may not be able to use the SD card.≥Depending on the type of SD card being used, it 
may take time to format.
≥Do not remove the SD card while formatting.
Formatting an SD card (VDR-D200 only)
This is for initializing cards.
D200(P_PC)eng.book  84 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							85LSQT0969
Disc and card management
Finalizing a disc
Finalizing a disc
(-RW‹VR›) (-RW‹V›) (-R)
To play back a DVD-RW (Video format) or a DVD-R on other devices e.g. a DVD player, finalize the 
disc.
¬Connect this unit to the AC adaptor. (Finalization cannot be executed using a battery.)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[ FINALIZE] # [YES] and press the joystick.
≥When finalizing a DVD-RW (VR format), skip to step 3.
2[When finalizing a DVD-RW (Video format) or DVD-R]
Select whether or not to create a top menu, then press the joystick.
3 When the confirmation message appears, select [YES], then press the 
joystick.
≥When finalizing is complete, press the MENU button to exit the message screen.
≥Do not finalize a disc recorded on this unit using any 
other device.
≥In the case of a double sided disc, finalize each 
side.
≥The top menu created when finalizing does not 
appear on this unit. Play back the disc on a DVD 
player.
≥It may take time to finalize a disc.≥If this unit becomes hot or is shaken strongly or 
impacted while finalizing, the finalization will fail and 
the disc may become unplayable on other devices.
≥If the power supply stops while finalizing, the 
finalization will fail and the disc may become 
unplayable on other devices even if disc repair is 
carried out.
Finalizing a disc
This is for enabling discs to be played on other devices.
∫Finalizing video format discs
Be sure to finalize the disc on this unit, before using it on other devices.
DVD-RW (Video format):After finalizing, the disc becomes play-only. You can record on the 
disc after un-finalizing (l86) or formatting (l83).
DVD-R:After finalizing, the disc becomes play-only and you can no longer 
record.
∫Finalizing VR format discs
DVD-RAM:It is not necessary to finalize DVD-RAM.
DVD-RW (VR format):Finalizing a DVD-RW (VR format) increases its compatibility with other 
products. DVD-RW (VR format) after finalization can be recorded and 
edited in the same way as DVD-RW (VR format) before finalization.
YES:After finalizing, a top menu containing thumbnails appears first during playback.
NO:A top menu is not created. Playback starts from the first scene.
D200(P_PC)eng.book  85 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							86LSQT0969
Disc and card management
Finalizing a disc
(-RW‹V›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[ UN-FINALIZE] # [YES] and press the joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
≥When un-finalizing is complete, press the MENU button to exit the message screen.
≥When you un-finalize the disc, use a battery with 
sufficient battery power or the AC adaptor.
≥DVD-RW (VR format) cannot be un-finalized. DVD-
RW (VR format) after finalization can be recorded 
and edited in the same way as DVD-RW (VR 
format) before finalization.≥DVD-R cannot be un-finalized.
Un-finalizing a DVD-RW
This is for un-finalizing a DVD-RW (Video format) so that it can be used for 
recording.
D200(P_PC)eng.book  86 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							87LSQT0969
Disc and card management
Protecting a disc
Protecting a disc
(RAM) (-RW‹VR›)
This is for preventing recorded contents from being deleted or edited by mistake.
Further recording and editing is not possible on protected discs until the protection is released.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[ DISC PROTECT] and press the joystick.
2 When the confirmation message appears, select [YES], then press the 
joystick.
To release disc protection
1) Press the MENU button, then select [ SETUP] # [ DISC PROTECT] and press the 
joystick.
2) When the confirmation message appears, select [YES], then press the joystick.
≥If the disc has been protected on another device, it 
may not be possible to release the protection on this 
unit. In this case, release the protection on the 
device that you used to protect it.
D200(P_PC)eng.book  87 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							88LSQT0969
Disc and card management
Displaying disc information
Displaying disc information
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded scenes, the remaining space and whether or not the 
disc is finalized or protected is displayed.
¬Rotate the mode dial to select  .
Press the MENU button, then select [ SETUP] # 
[INFORMATION] # [YES] and press the joystick.
To exit the information screen
Press the MENU button.
D200(P_PC)eng.book  88 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							89LSQT0969
With other products
With a TV
With other products
With a TV
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
Images recorded by this unit can be played back on a TV.
≥Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
* If the TV has an S Video terminal, also connect the 
S Video plug to it. This allows you to enjoy more 
beautiful pictures.
2 Turn on this unit, then rotate the mode dial to select   or  .
3 Change the input channel on the TV.
Example: Set the channel to “VCR2”, etc. (The channel set will differ depending on the terminal 
to which the unit is connected.)
4 Start playback on this unit.
The image and audio are output on the TV.
∫If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥Check the TV’s input setting (input switch). (For more information, please read the 
operating instructions for the TV.) 
Playback on TV
AAV/S cable (supplied)
≥Insert the plugs as far as they will go.
VIDEO IN S VIDEO IN
*
AUDIO IN
A
D200(P_PC)eng.book  89 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							90LSQT0969
With other products
With a DVD recorder/player
With a DVD recorder/player
≥When playing back a disc on a DVD recorder/player, place the device so that the disc lies flat.
(RAM) (-RW‹VR›)
Insert the disc in the DVD recorder/player, then play 
it back.
≥Playback is only possible on devices that support 
8 cm (3z) DVD-RAM or DVD-RW (VR format). See 
the operating instructions for DVD recorder/player.≥DVD-RW (VR format) may have to be finalized. In 
this case, finalize the disc on this unit. (l85)
≥You cannot record images that allow “One time only 
recording” on a 8 cm (3z) disc.
(-RW‹V›) (-R)
1 Finalize the disc on this unit. (l85)
2 Insert the disc in the DVD recorder/player, then 
play it back.
≥Do not insert a disc that has not been finalized into 
a DVD recorder/player: the disc may be unusable.
Also, a message asking you to format the disc may 
appear on the DVD recorder. Do not format the disc.≥Playback is possible on devices that support 8 cm 
(3z) DVD-Video, but playback on all DVD players is 
not guaranteed.
Playback on DVD recorder/player
Playing back a DVD-RAM or a DVD-RW (VR format)
Playing back a DVD-RW (Video format) or a DVD-R
D200(P_PC)eng.book  90 ページ  ２００６年１月１８日　水曜日　午後５時４６分