Panasonic Vdr D100 Operating Instructions Manual

							121LSQT0969
With a computer (VDR-D200 only)
Using discs on a computer (Macintosh)
5 Insert the disc in this unit.
The contents recorded on the disc are displayed.
6 Click the desired program (A), select the scene to 
be added to the DVD-Video (B) and then click the 
[Save] button (C).
7 Select the destination folder to save, select [Default] 
in [Format] and then click the [Save] button.
≥When saving is complete, select [Pixe VRF Browser EX] # [Quit Pixe 
VRF Browser EX] from the Menu Bar to exit Pixe VRF Browser EX.
≥The disc cover on this unit opens. You can remove the disc and 
disconnect the USB cable.
8 Prepare a DVD-RW/DVD-R/rRW/rR drive that can be written to.
≥Check that a disc is not inserted in the drive. 
9 Double-click the [ImageMixerVCDDVD2] icon in the [ImageMixer for 
Panasonic] folder you installed.
ImageMixer VCD/DVD2 starts.
10 Click the [DVD-Video] button.
11 Use [Select folder] to select the folder containing the 
MPEG files saved with Pixe VRF Browser EX and 
then click the [Add] button.
≥Repeat this to add multiple folders.
B
C
A
D200(P_PC)eng.book  121 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							122LSQT0969
Using discs on a computer (Macintosh)
With a computer (VDR-D200 only)
12 Click [Create Menu] (A) and edit the DVD menu as 
required, then click [Write to Disc] (B).
13 Check [Create disc] (A), select the drive to be 
used (B) and then click [Write] (C).
14 Insert a brand-new 12 cm (5z) DVD-RW or DVD-R disc into 
the disc drive and click [OK].
≥12 cm (5z) iRW and iR discs can also be used if the disc drive supports them.
15 Proceed with the write setting and then click [OK].
Writing to the disc starts.
≥Depending on the amount of data, writing to the disc may take time.
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (lbelow).
≥When the unit is connected to a computer in disc 
playback mode, no image will appear on the LCD 
monitor or viewfinder.
≥When this unit is connected to a computer, you 
cannot use this unit’s DISC EJECT lever to remove 
a disc. Use the software’s eject button to eject the 
disc.≥When a computer is accessing a disc in this unit, 
the ACCESS/PC lamp lights. Do not disconnect the 
USB cable or AC adaptor while the disc is being 
accessed as it may damage the data.
When the drive icon is displayed on the desktop:
Drag the icon into the Trash and then disconnect the USB cable.
When the drive icon is not displayed on the desktop:
Exit the application and then disconnect the USB cable.
≥If you disconnect the USB cable while the access 
lamp is on, it may damage the data.
AB
A
B
C
To disconnect USB cable safely
D200(P_PC)eng.book  122 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							123LSQT0969
With a computer (VDR-D200 only)
Using an SD card on a computer (Macintosh)
Using an SD card on a computer (Macintosh)
¬Connect this unit to the AC adaptor.
¬Insert an SD card with recorded images in the unit, turn on the unit and then 
rotate the mode dial to select  .
1 Press the MENU button, then select [ SETUP] # 
[ USB FUNCTION] # [PC CONNECT] and press the joystick.
≥Press the MENU button to exit the menu screen.
2 Connect this unit and a computer.
 icon appears.
≥Do not use any other USB cables except the 
supplied one. (Operation is not guaranteed with any 
other USB cables.)
≥When the unit is connected to a computer, the 
operation mode cannot be changed and its 
power cannot be turned off.
In this case, disconnect the USB cable (l124).≥When a computer is accessing a card in this unit, 
the card access lamp lights. ( appears on the 
LCD monitor.) Do not disconnect the USB cable or 
AC adaptor while the card is being accessed as it 
may damage the data.
Connection
AUSB cable (supplied)
≥Insert the plugs as far as they will go. The unit 
and computer will not operate properly if the 
plugs are not inserted fully.
A
D200(P_PC)eng.book  123 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							124LSQT0969
Using an SD card on a computer (Macintosh)
With a computer (VDR-D200 only)
1 Double-click the [NO_NAME] icon.
The folders on the SD card are displayed.
2 Select the file in the [100CDPFP] folder to copy and drag and drop it to 
the destination copy folder.
∫Example folder structure of an SD card:
≥JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software that supports JPEG pictures.
≥Up to 999 files can be recorded in the [100CDPFP] or other such folder.
≥The DPOF setting files are recorded in the [MISC] folder.
≥Do not use the computer to delete the SD card’s 
folders. Otherwise, it may no longer be possible for 
this unit to read the SD card.
≥Always use this unit to format SD cards.≥When data not supported by this unit has been 
recorded on a computer, it will not be recognized by 
this unit.
Drag the [NO_NAME] icon into the Trash and then disconnect the USB 
cable.
≥If you disconnect the USB cable while the access 
lamp is on, it may damage the data.
Copying still picture files to a computer
DCIM
100CDPFP
MISC
To disconnect USB cable safely
D200(P_PC)eng.book  124 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							125LSQT0969
Menus
Others
Others
Menus
Motion picture recording 
menus
∫[ BASIC]
[ SCENE MODE] (l55)
[WINDCUT] (l52)
[RECMODE] (l42)
[ CINEMA] (l52)
[ CLOCK SET] (l38)
∫[ ADVANCED]
[ D.ZOOM] (l45)
[EIS] (l53)
[ MAGICPIX] (l53)
[ FADE COLOR] (l49)
[ ZOOM MIC] (l46)
∫[SETUP]
[DISPLAY] (l127)
[DATE/TIME] (l38)
[ DATE FORMAT] (l38)
[ POWER SAVE] (l127)
[BEEPSOUND] (l127)
[ LCD SET] (l39)
[EVFSET] (l39)
[ INITIAL SET] (l127)
[DEMOMODE] (l127)
∫[ LANGUAGE] (l35)
Still picture recording menus 
(VDR-D200 only)
≥For [ SETUP] items, refer to the motion 
picture recording menus.
∫[ BASIC]
[ SCENE MODE] (l55)
[ PICT. QUALITY] (l44)
[ CLOCK SET] (l38)
∫[ ADVANCED]
[ SHTR EFFECT] (l44)
∫[LANGUAGE] (l35)
Menu list
 
EIS
EVF
DEMO
D200(P_PC)eng.book  125 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							126LSQT0969
Menus
Others
Motion picture playback menus
∫[ DELETE]
(Only when [PLAY MODE] is set to [VIEW ALL] 
or [BY DATE])
[ SELECT] (l66)
[ ALL] (l66)
∫[PLAYSETUP]
[ PLAY MODE] (l63, 71, 72)
[RESUMEPLAY] (l63)
∫[ EDIT SCENE]
(Only when [PLAY MODE] is set to [VIEW ALL] 
or [BY DATE])
[ DIVIDE] (l68)
[ COMBINE] (l69)
∫[EDIT]
(Only when [PLAY MODE] is set to 
[PLAYLIST])
[ ADD] (l73)
[ MOVE] (l74)
[ DIVIDE] (l75)
[ COMBINE] (l76)
[ DELETE] (l77)
∫[SETUP]
[ FORMAT DISC] (l83)
[ FINALIZE] (l85)
[ UN-FINALIZE] (l86)
[DISCPROTECT] (l87)
[INFORMATION] (l88)
[DISPLAY] (l127)
[DATE] (l38)
[ DATE FORMAT] (l38)
[ POWER SAVE] (l127)
[ BEEP SOUND] (l127)
[LCDSET] (l39)
[EVFSET] (l39)
∫[ LANGUAGE] (l35)
Still picture playback menus 
(VDR-D200 only)
∫[ DELETE]
[ SELECT] (l79)
[ ALL] (l79)
∫[PLAYSETUP]
[ PLAY MODE] (l65)
[ LOCK] (l81)
[ DPOF SET] (l82)
∫[SETUP]
[DISPLAY] (l127)
[DATE/TIME] (l38)
[DATEFORMAT] (l38)
[ FORMAT CARD] (l84)
[ POWER SAVE] (l127)
[BEEPSOUND] (l127)
[ LCD SET] (l39)
[EVFSET] (l39)
[ USB FUNCTION] (l93, 106)
∫[ LANGUAGE] (l35)
EVF
EVF
D200(P_PC)eng.book  126 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							127LSQT0969
Menus
Others
∫[DISPLAY]
≥ OFF≥ ON
The screen indications are selected as shown 
in the illustration below.
∫[ BEEP SOUND]
≥ OFF≥ ON
This allows operations such as starting and 
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an 
operation such as recording is started or 
ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or 
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not 
starting. Check the sentence displayed on the 
screen. (l130)∫[ POWER SAVE]
≥ OFF≥ 5 MINUTES
[OFF]:The power saving function is not 
activated.
[5 MINUTES]:
When about 5 minutes passed without 
any operation, this unit automatically 
turns off to prevent the battery from 
running down. When you use this unit, 
turn it on again.
≥In the following cases, the unit may not turn 
off even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or 
printer via the USB cable
∫[ INITIAL SET]
≥ YES≥ NO
When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to 
the initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)
∫[ DEMO MODE]
≥ OFF≥ ON
This item is used to start the unit 
demonstration.
(Only when using the AC adaptor and the mode 
dial is at the   or   position)
If you set this to [ON] without inserting a disc or 
an SD card, this unit is automatically set to the 
demonstration mode for introducing its 
functions. If any button is pressed or operated, 
the demonstration mode is canceled. If no 
operations take place for approx. 10 minutes, 
the demonstration mode automatically starts. 
To terminate the demonstration mode, insert a 
disc or an SD card, or set this to [OFF]. For 
normal use, set this function to [OFF].
Setup menu
OFF
ON;
 3:30 PM
12.15.2006
;R  0h00m0h00m00s
 3:30 PM
12.15.2006
EISSP
DEMO
D200(P_PC)eng.book  127 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							128LSQT0969
Indications
Others
Indications
∫Recording indications
Indications
1Motion picture recording2Still picture recording (VDR-D200 only)
;R  0h00m0h00m00s1
 3:30 PM
12.15.2006
50×EIS
AWB1/100OPEN
3dB
SP2;R  100
 3:30 PM
12.15.2006
30×
AWB1/60OPEN
6dB
Remaining battery power
R 0h00mRemaining time for recording
0h00m00sElapsed recording time
3:30 PM
12.15.2006Date/Time indication
¥/; (Red)Recording
; (Green)Recording pause
Digital zoom
Auto mode
Manual mode
MFManual focus
2tZoom magnification indication
ªBack light mode
Image stabilizer
1/100Shutter speed
OPEN, F2.0F number
0dBGain value
Soft skin mode
Fade (White)
Fade (Black)
MagicPix function
Video light
Zoom microphone
Wind noise reduction
, , Motion picture recording 
mode
AUTO
MNL
EIS
ZOOM
XPSPLP
5Sports mode
Portrait mode
Low light mode
Spotlight mode
Surf & snow mode
Auto white balance
Indoor mode (recording under 
incandescent lamp)
Outdoor mode
Manual adjustment mode
Disc type
DVD-RAM
DVD-RW (VR format)
DVD-RW (Video format)
DVD-RW (unformatted)
DVD-R
Progressive photoshot mode
Ø
10, Ø2Self-Timer recording
Number of recording pixels for 
still pictures
640k480
 (White)
 (Green)
 (Red) Card can be recorded to
Recognizing the card
Recording/accessing the card
, Still picture quality
R 100Remaining number of still 
pictures
AWB
D200(P_PC)eng.book  128 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							129LSQT0969
Indications
Others
∫Playback indications
∫Confirmatory indications
1Motion picture playback2Still picture playback (VDR-D200 only)
1Playback
;Pause
56Cue/Review playback
78Last/first scene paused
9/:Skip playback
D/ESlow motion playback
;1/2;Frame-by-frame playback
0h00m00sMotion picture playback time
Play mode
All scenes on the disc displayed
Scenes recorded on the selected 
date displayed
Scenes in the selected playlist 
displayed
No.10Scene number
Volume adjustment
RResume playback
Contents that have been 
protected on another device.
Slide show playback
100-0001Still picture folder/file number 
display
When a printer compatible with 
PictBridge is connected
 (Red)Accessing the card (When 
connected to a computer)
1DPOF already set (to more than 
1)
Locked still pictures
Number of recording pixels for 
still pictures
640k480For pictures not recorded with this unit, the 
size display is determined as follows 
according to the number of horizontal pixels. If 
this number is 2048, 1920, 1280 or 640, then 
[], [ ], [] or [] will be 
displayed respectively regardless of the 
number of vertical pixels.
2048 pixels or more
1600 or more, less than 2048 pixels
1280 or more, less than 1600 pixels
1024 or more, less than 1280 pixels
800 or more, less than 1024 pixels
640 or more, less than 800 pixels
(The size is not displayed at under 
640 pixels.)
0 or
––The built-in battery is low. (l38)
°The warning/alarm indication 
appears when LCD monitor is 
rotated towards the lens side. 
Return the direction of the LCD 
monitor to normal position and 
check the warning/alarm 
indication.
No disc is inserted.
Unusable disc
No SD card is inserted/unusable 
card.
QXGAUXGA
SXGA
XGASVGA
D200(P_PC)eng.book  129 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							130LSQT0969
Indications
Others
Messages
CANNOT RECORD.Data writing to the disc or card has failed.
NO DATA.There are no images recorded on the disc or card.
THIS DISC IS 
INCOMPATIBLE.You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE 
DISC.You inserted a disc that cannot be read on this unit (a disc 
recorded in PAL video format etc.).
RECOMMENDED TO USE 
PANASONIC DISCYou inserted a disc that does not meet the DVD standard for 
quality and performance so you may not be able to record 
normally. Refer to the following support site for information 
about discs that have been confirmed as compatible by 
Panasonic.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
CANNOT RECORD.
(THIS DISC IS FINALIZED)A finalized DVD-RW (Video format) or DVD-R has been 
inserted. After finalizing, the discs become play-only and cannot 
record. If you un-finalize a DVD-RW (Video format), it can be 
used for recording. (l86)
CANNOT RECORD. DISC 
IS FULL.
The disc is full or the number of scenes has reached the 
maximum limit so no further data can be recorded. Delete 
unnecessary scenes (l66) or insert a new disc.
CANNOT RECORD. THE 
NUMBER OF SCENES HAS 
EXCEEDED THE MAXIMUM 
LIMIT.
CANNOT OPERATE.
TEMPERATURE IS HIGH. 
PLEASE TURN OFF AND 
WAIT A WHILE.The temperature of the unit is high so it cannot be operated. 
Turn off the power, wait until the unit cools and then turn on the 
power again.
CANNOT UN-FINALIZE 
THIS DISC.DVD-R cannot be un-finalized.
DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR 
format) after finalization can be recorded and edited in the same 
way as DVD-RW (VR format) before finalization.
CHECK CARD.This card is not compatible or it cannot be recognized by the 
unit.
CARD LOCKED.The write protection switch on the SD Memory Card is set to 
LOCK. (l22)
CARD FULL.The SD card is full so no further data can be recorded. Delete 
unnecessary files (l79) or insert a new SD card.
D200(P_PC)eng.book  130 ページ  ２００６年１月１８日　水曜日　午後５時４６分