Panasonic Vdr D100 Operating Instructions Manual

							31LSQT0969
Setup
How to use the joystick
How to use the joystick
This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate 
this unit with one hand.
Operations on the menu screen and selection of files on the thumbnail view screen, etc.
Move the joystick up, down, left, or right to select an item or file, and then 
press the joystick to set it.
≥Menu screen operations (l36)
Press the center of the joystick, and icons will be displayed on the screen. Each press switches the 
display as follows depending on the mode.
(In the disc playback mode or the card playback mode, the icons will be automatically displayed on 
the screen.)
Basic operations
1Select by moving up.
2Select by moving down.
3Select by moving left.
4Select by moving right.
5Press the joystick to select the item.
Joystick and screen display
Disc recording mode
(AUTO/MANUAL/FOCUS switch is set to AUTO)
A: The operation icon is off.
IconDirectionFunctionPage
—4Soft skin mode 47
2Fade 48
ª1Backlight compensation 50
1
34
2
5
A
D200(P_PC)eng.book  31 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							32LSQT0969
Setup
How to use the joystick
Disc recording mode
(AUTO/MANUAL/FOCUS switch is set 
to MANUAL)
A: The operation icon is off.
IconDirectionFunctionPage
(1/2)4Soft skin mode 47
2Fade 48
ª1Backlight compensation 50
(2/2)3Manual white balance set
(Only when manual white balance adjustment 
mode is selected)59
4White balance 58
Shutter speed 60
Iris or gain value 60
s
r21White balance mode selection, manual 
adjustments57, 58, 60
Disc playback mode
A: The operation icon is off.
IconDirectionFunctionPage
—1/;3Playback/pause 61
∫4Stop playback and show thumbnails 61
:
2Rewind, skip (during playback) 61
2;Reverse slow/frame playback (during pause) 62
9
1Fast forward, skip (during playback) 61
;1Forward slow/frame playback (during pause) 62
A
A
D200(P_PC)eng.book  32 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							33LSQT0969
Setup
How to use the joystick
Card recording mode (VDR-D200 only)
(AUTO/MANUAL/FOCUS switch is set to AUTO)
A: The operation icon is off.
IconDirectionFunctionPage
—4Soft skin mode 47
Ø2Self timer 51
ª1Backlight compensation 50
Card recording mode 
(VDR-D200 only)
(AUTO/MANUAL/FOCUS switch is set 
to MANUAL)
A: The operation icon is off.
IconDirectionFunctionPage
(1/2)4Soft skin mode 47
Ø2Self timer 51
ª1Backlight compensation 50
(2/2)3Manual white balance set
(Only when manual white balance adjustment 
mode is selected)59
4White balance 58
Shutter speed 60
Iris or gain value 60
s
r21White balance mode selection, manual 
adjustments57, 58, 60
A
A
D200(P_PC)eng.book  33 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							34LSQT0969
Setup
How to use the joystick
Card playback mode (VDR-D200 only)
(When [PICTURE] is selected)
A: The operation icon is off.
IconDirectionFunctionPage
—∫4Stop playback and show thumbnails 64
E2Playback previous picture 64
D1Playback next picture 64
Card playback mode (VDR-D200 only)
(When [SLIDE SHOW] is selected)
A: The operation icon is off.
IconDirectionFunctionPage
—1/;3Slide show start/pause 65
∫4Stop playback and show thumbnails 64
E2Playback previous picture (during pause) 64
D1Playback next picture (during pause) 64
A
A
D200(P_PC)eng.book  34 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							35LSQT0969
Setup
Switching the language
Switching the language
You can switch the language on the screen display or the menu screen.
1 Press the MENU button, then select [ LANGUAGE] 
and press the joystick.
2 Select [English] and press the joystick.
D200(P_PC)eng.book  35 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							36LSQT0969
Setup
Using the menu screen
Using the menu screen
Refer to “Menu list” (l125) for information about the menus.
1 While stopped, press the MENU button.
The menu displayed differs depending on the position of the mode 
dial.
≥Do not switch the mode dial when the menu is displayed.
2 Move the joystick up or down in order to 
select the desired top menu A.
3 Move the joystick right or press 
the joystick.
The submenu B is displayed.
4 Move the joystick up or down in order to 
select the submenu item.
CCurrent settings on menus
MENU
A
B
C
D200(P_PC)eng.book  36 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							37LSQT0969
Setup
Using the menu screen
5 Move the joystick right or press 
the joystick.
6 Move the joystick up or down in order to 
select the desired item.
7 Press the joystick to enter the selection.
To get back to the previous screen
Move the joystick left.
To exit the menu screen
Press the MENU button.
≥The menu screen does not appear during recording 
or playing. You cannot start other operations while 
the menu screen appears.
MENU
D200(P_PC)eng.book  37 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							38LSQT0969
Setup
Setting date and time
Setting date and time
If the screen shows the incorrect date/time, then adjust it.
¬Rotate the mode dial to select   or  .
1 Press the MENU button, then select [ BASIC] # 
[ CLOCK SET] # [YES] and press the joystick.
2 Move the joystick left or right to select the item to be 
set. Then, move the joystick up or down to set the 
desired value.
≥The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥The 12-hour system is used to display the time.
3 Press the joystick to enter the selection.
≥After pressing the MENU button to finish the setting, check the date and time display.
≥The clock function starts at [00] seconds.
∫Changing the display style
Press the MENU button, then select [ SETUP] # 
[DATEFORMAT] # desired display style and press the joystick.
∫Changing the date and time display style
Press the MENU button, then select [ SETUP] # [DATE/TIME] 
# desired display style and press the joystick.
≥The date and time function are driven by a built-in 
lithium battery.
≥Make sure to check the time before recording.
≥If [0] or [- -] is indicated when this unit is turned 
on, then the built-in lithium battery runs down. After 
charging the battery using the steps below, set the 
clock.
Connect the AC adaptor to this unit or place the 
battery on this unit, and the built-in lithium battery 
will be recharged. Leave this unit as is for approx. 
24 hours, and the battery will save the date and time 
for approx. 6 months. (Even if the OFF/ON switch is 
set to OFF, the battery is still being recharged.)
Display 
styleY/M/D M/D/Y D/M/Y
Screen 
display3:30 PM
2006.12.153:30 PM
12.15.20063:30 PM
15.12.2006
[DATE] [D/T] [OFF]
  3:30 PM 
12.15.200612.15.2006
D200(P_PC)eng.book  38 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							39LSQT0969
Setup
Adjusting LCD monitor/viewfinder
Adjusting LCD monitor/viewfinder
Adjust the brightness and color level.
1 Press the MENU button, then select [ SETUP] # 
[ LCD SET] or [ EVF SET] # [YES] and press the 
joystick.
2 Move the joystick up or down to select the item to be 
adjusted. Then, move the joystick left or right to 
make the adjustment.
The bar display moves.
[LCDSET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[ EVF SET]
: Brightness of the viewfinder
≥In order to adjust the brightness of the viewfinder, 
close the LCD monitor, and the viewfinder will be 
activated.≥When the LCD monitor is rotated by 180° towards 
the lens, the brightness of the LCD monitor cannot 
be adjusted.
≥These settings will not affect the images actually 
recorded.
Adjust the focus by sliding the eyepiece corrector 
knob.
≥You can adjust the brightness of the viewfinder from the menu. 
(labove)
EVF
EVF
EVF
Adjusting the field of view
 3:30 PM
12.15.2006 3:30 PM
12.15.2006 3:30 PM
12.15.2006 3:30 PM
12.15.2006
D200(P_PC)eng.book  39 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							40LSQT0969
Recording
Before recording
Recording
Before recording
1Hold the camera with both hands.
2Run your hand through the grip belt.
3Do not cover the microphones or sensors with your hands.
4Keep your arms near your body.
5Slightly open your legs.
≥When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it 
will become dark in the recording.
Basic camera positioning
4
5 1
23
D200(P_PC)eng.book  40 ページ  ２００６年１月１８日　水曜日　午後５時４６分