Panasonic Vdr D100 Operating Instructions Manual

							61LSQT0969
Playback
Motion picture playback
Playback
Motion picture playback
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
1 Rotate the mode dial to select  .
The motion pictures recorded on the disc are displayed 
as thumbnails.
2 Select the scene to be played back.
AScene number
BScroll bar display
The selected scene will be encircled by a red frame.
≥When 9 or more scenes have been recorded, the next (or previous) page 
is displayed by moving the joystick.
≥If you move and hold the joystick up or down, you can advance 8 scenes 
at a time. The screen will not change at this time, but the scene numbers 
and scroll bar display will change so release the joystick when you have 
arrived at the page with the scene you want to display.
3 Press the joystick.
The selected scene is played back on the full screen.
The operation icon is automatically displayed on the screen.
4 Move the joystick to operate.
≥During playback, the recording time is not displayed 
on the screen.
≥No sound will be heard except during normal 
playback.
≥If pause play is continued for 5 minutes, the screen 
returns to the thumbnails.≥When the amount of time recorded on the scene is 
short, playback may not be possible.
≥The thumbnails of motion pictures that cannot be 
played back are displayed in shades of blue and 
white.
A
B
12. 15. 2006
1/;: Playback/Pause
:(Move): Skip playback (backward)
:(Move and hold): Review playback
9(Move): Skip playback (forward)
9(Move and hold): Cue playback
∫: Stops the playback and shows the thumbnails.
D200(P_PC)eng.book  61 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							62LSQT0969
Playback
Motion picture playback
1 Move the joystick up during playback to pause the 
playback.
2 Move and hold the joystick right.
(Slow-motion pictures will be played back in reverse 
when you move and hold the joystick left.)
≥Normal playback is restored when you move the joystick up.
The motion picture is advanced one frame at a time.
1 Move the joystick up during playback to pause the 
playback.
2 Move the joystick right. 
(The frames will be advanced one at a time in the 
reverse direction when you move the joystick left.)
≥Normal playback is restored when you move the joystick up.
Adjust the speaker volume during playback.
Move the volume lever to change the volume 
level.
≥The further the [ ] indicator moves to the right (towards the “i” end), the higher the volume level 
becomes.
≥When the adjustment is completed, the volume setting display will disappear.
Slow-motion playback
Frame-by-frame playback
To adjust the volume
To w a r d s  “r”:increases the volume
To w a r d s  “s”:decreases the volume
D200(P_PC)eng.book  62 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							63LSQT0969
Playback
Motion picture playback
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1 Press the MENU button, then select 
[PLAYSETUP] # [PLAYMODE] # [BY DATE] 
and press the joystick.
≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion 
pictures will be played back in succession. ([ ALL] is displayed.)
2 Select the date for playback, then press the joystick.
The scenes recorded on the same day are displayed as thumbnails.
3 Select the scene to be played back.
≥Even if scenes are recorded on the same day, they are grouped separately in the following cases.
– When the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
– When the disc is removed (-RW‹V›) (-R)
– When the disc is repaired (-RW‹V›) (-R)
– When the mode dial is switched (-R)
– When the power is turned off (-R)
Press the MENU button, then select [ PLAY SETUP] 
# [ RESUME PLAY] # [ON] and press the joystick.
If playback of a motion picture is stopped, [R] appears on the thumbnail 
view of the stopped scene.
≥If playback is stopped at any point during a motion picture while 
[RESUME PLAY] is set to [OFF], the next time the motion picture is 
played back, it will be from the beginning.
≥The resume position memorized is cleared if the 
unit is turned off, but the menu setting is not 
cleared.
Playing back motion pictures by date
Resuming the previous playback
D200(P_PC)eng.book  63 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							64LSQT0969
Playback
Still picture playback (VDR-D200 only)
Still picture playback (VDR-D200 only)
(SD)
1 Rotate the mode dial to select  .
The still pictures recorded on the SD card are displayed 
as thumbnails.
2 Select the file to be played back.
AFile number
BScroll bar display
The selected file will be encircled by a red frame.
≥When 9 or more files have been recorded, the next (or previous) page is 
displayed by moving the joystick.
≥If you move and hold the joystick up or down, you can advance 8 files at 
a time. The screen will not change at this time, but the file numbers and 
scroll bar display will change so release the joystick when you have 
arrived at the page with the file you want to display.
3 Press the joystick.
The selected file is played back on the full screen.
The operation icon is automatically displayed on the screen.
4 Move the joystick to operate.
A
B
1/;: Slide show (playback of the still pictures on the SD card in numerical order) start/pause.
E: Plays back the previous picture.
D: Plays back the next picture.
∫: Stops the playback and shows the thumbnails.
D200(P_PC)eng.book  64 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							65LSQT0969
Playback
Still picture playback (VDR-D200 only)
Press the MENU button, then select [ PLAY SETUP] 
# [PLAYMODE] # [SLIDE SHOW] and press the 
joystick.
∫About still picture compatibility
≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) 
established by JEITA (Japan Electronics and Information Technology Industries Association).
≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) 
≥If an out-of-specs file is played back, the folder/file number may not be displayed.
≥This unit may degrade or not play back data recorded or created on another product and another 
product may degrade or not play back data recorded on this unit.
≥Do not operate the mode dial during the slide show.
≥When the access lamp is lit, do not insert or remove 
an SD card.
≥It takes time to display the file depending on the 
number of pixels of the file.
≥If you attempt to play back file recorded in a 
different format or file data is defective, the whole 
display becomes grayish and an error message 
may appear.≥When playing back a file recorded on other 
products, the date and time display is different from 
when it was recorded.
≥When playing back a file recorded on other 
products, its size and that of this unit may appear 
differently. (l129)
Playing back still pictures as a slide show
D200(P_PC)eng.book  65 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							66LSQT0969
Editing
Editing scenes
Editing
Editing scenes
(RAM) (-RW‹VR›)
The deleted scenes cannot be restored.
≥Scenes on DVD-RW (Video format) and DVD-R cannot be deleted.
¬Rotate the mode dial to select  .
1 Press the   button during playback.
2 When the confirmation message appears, select [YES], then press the 
joystick.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select [ DELETE] # 
[ SELECT] or [ ALL] and press the joystick.
≥When [ALL] is selected, the following scenes will be deleted. Proceed to 
step 4.
– When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the disc
– When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date
2(Only when [SELECT] is selected in step 1)
Select the scene to be deleted, then press the 
joystick.
The selected scene is encircled by a yellow frame.
≥When the joystick is pressed again, the selected scene will be canceled.
≥Up to 8 scenes displayed on a page can be set in succession.
3(Only when [SELECT] is selected in step 1)
Press the   button.
4 When the confirmation message appears, select [YES], then press the 
joystick.
(Only when [SELECT] is selected in step 1)
To continue deleting other scenes
Repeat steps 2-4.
Deleting scenes
This is for deleting scenes recorded on discs.
Deleting scenes one at a time
Deleting multiple scenes from the thumbnail display
D200(P_PC)eng.book  66 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							67LSQT0969
Editing
Editing scenes
To complete editing
Press the MENU button.
≥To delete an unwanted part of a scene, divide the 
scene first, and then delete the unnecessary part. 
(l68)
≥In case of [ALL], the deletion may take time if there 
are many scenes on the disc.
≥Do not turn off this unit while deleting.≥When you delete scenes, use a battery with 
sufficient battery power or use the AC adaptor.
≥It may not be possible to delete scenes that have 
been divided. Combine the divided scenes, and 
then delete them.
D200(P_PC)eng.book  67 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							68LSQT0969
Editing
Editing scenes
(RAM) (-RW‹VR›)
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary 
portion.
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ DIVIDE] and press the 
joystick.
2 Select the scene to be divided, then press the 
joystick.
The selected scene is played back.
3 When you reach the area where you want to divide 
the scene, move the joystick down to set the 
dividing point.
4 When the confirmation message appears, select [YES], then press the 
joystick.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
Dividing a scene
This is for dividing a scene into two.
D200(P_PC)eng.book  68 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							69LSQT0969
Editing
Editing scenes
(RAM) (-RW‹VR›)
¬Rotate the mode dial to select  .
1 Press the MENU button, then select 
[ EDIT SCENE] # [ COMBINE] and press the 
joystick.
2 Select the scene to be combined, then press the 
joystick.
≥The selected scene and the next scene are combined.
≥If you wish to combine scenes that are not next to each other or scenes 
with different recording dates, first create a playlist and then combine the 
scenes on the playlist. 
(l71, 76)
3 When the confirmation message appears, select [YES], then press the 
joystick.
To continue combining other scenes
Repeat steps 2-3.
To complete editing
Press the MENU button.
Combining scenes
This function is only for combining two consecutive scenes into one.
D200(P_PC)eng.book  69 ページ  ２００６年１月１８日　水曜日　午後５時４６分 
						

							70LSQT0969
Editing
Using playlists
Using playlists
You can create a playlist by gathering your favorites from the recorded scenes.
Since the playlist is not created by copying data, you will consume little of the disc capacity by 
making a playlist.
≥If you create or delete playlists, the original scenes will not be modified. Editing scenes on a 
playlist will not affect the original scenes.
≥The maximum number of items on a disc (per side)
– Playlists: 99
– Playlist scenes: 999≥If original scenes are deleted, the portion of playlists 
created with these scenes is also deleted.
What is a playlist?
Recorded scenes
Playlist
D200(P_PC)eng.book  70 ページ  ２００６年１月１８日　水曜日　午後５時４６分