Panasonic Up/Down Wall Mount Kit, Up/Down Stand Kit UE-608030, UE-608031, UE-608032 Operating Instructions

							Operating Instructions
Up/Down Wall Mount KitUp/Down Stand Kit
(For elite Panaboard)
Model No.UE-608030
UE-608031
UE-608032
Installation Manual Included (for qualified service personnel)
•To assemble this unit, please refer to the Installation Manual on pages 14 through 39.
•Before operating this unit, please read these instructions completely and keep them carefully for future 
reference.
•This unit is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of 
this equipment.
For U.S.A. only:
•To locate the closest authorized dealer in your area, please call 1-800-449-8989.
UE-608030_EN.book  1 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							2 Operating Instructions
Introduction
Introduction
Introduction
Thank you for purchasing the Panasonic up/down wall mount kit and up/down stand kit.
For optimum performance and safety, please read these instructions carefully.
Feature Highlights
The up/down wall mount kit and up/down stand kit are used solely with the Panasonic elite Panaboard.
These kits allow the elite Panaboard to be placed at the exact height desired.
They enable the elite Panaboard to be placed at a low height when it is going to be used for small children or at a 
higher height when it is going to be used for older children. In addition, the projector can be installed at the top of 
the stand for use so that the screen surface will be less likely to be in the shadows, making the elite Panaboard 
easy to use.
When using up/down stand kit, the large-sized casters provided enable the projector arm part to rotate so that 
even a large board and stand system can be easily moved from one place to another.
Things you should keep a record of
Exemption of Liability
Panasonic System Networks Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to, 
the following:
1.Altering the device or improper installation construction.
2. Using the device for purposes beyond its intended use.
3. Earthquake, fire, flood, tidal wave, hurricane, lightning or other natural phenomena.
4. Natural aging of the building or similar phenomena.For your future reference
Date of purchase
Serial number
Dealer’s name
Dealer’s address
Dealer’s tel no.
Attach your sales receipt here
UE-608030_EN.book  2 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							3
Operating Instructions
Table of Contents
Table of Contents
Table of Contents
Operating Instructions
For Your Safety ..............................................................................................4
Usage ..............................................................................................................7
Included Accessories ........................................................................................................... .... 7
Names and Uses of the Parts .................................................................................................. 7
Checkpoints When Installing the Equipment on the Table Plate ......................................... 8
Securing the Stand ............................................................................................................. ...... 9
Moving the elite Panaboard Up or Down ................................................................................ 9
Using the elite Panaboard ...................................................................................................... 10
Adjusting the Screen Image .................................................................................................. 10
Moving the Stand ............................................................................................................... ..... 11
Appendix ......................................................................................................13
Troubleshooting ................................................................................................................ ..... 13
Installation Manual (for qualified service personnel)
For Your Safety ............................................................................................14
Product Configuration ................................................................................16
Packing Configuration .......................................................................................................... .16
Included Accessories ........................................................................................................... .. 16
Wall Mounting Construction.......................................................................18
Checking the Wall ................................................................................................................... 18
Wall Types and Installation Procedures ............................................................................... 20
Mounting and Securing the Up/Down Unit ........................................................................... 24
Preparing to Mount the Projector.......................................................................................... 24
Mounting the Projector Arm .................................................................................................. 26
Adjusting the Up/Down Unit .................................................................................................. 28
Mounting the elite Panaboard ............................................................................................... 33
Checking the Up/Down Operations....................................................................................... 33
Wiring Connections ............................................................................................................. ... 34
Apply the High-Temperature Warning Label........................................................................ 34
Projection Adjustments ......................................................................................................... 35
Securing the elite Panaboard ................................................................................................ 36
Checking the Operations of the elite Panaboard ................................................................. 36
Assembling the Stands ...............................................................................37
Assembling the Stand Table Unit.......................................................................................... 37
Attaching the Protective Cover ............................................................................................. 39
Securing the Up/Down Stand Kit ........................................................................................... 39
Checking the Operations of the elite Panaboard ................................................................. 39
UE-608030_EN.book  3 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							4 Operating Instructions
For Your Safety
For Your Safety
For Your Safety
To prevent severe injury and loss of life, read this 
section carefully before using the unit to ensure proper 
and safe operation of your unit.
•This section explains the graphic symbols used in 
this manual.
For Users
Installation and Relocation
Operating Safeguards
Denotes a potential 
hazard that could 
result in serious 
injury or death.
Denotes hazards 
that could result in 
minor injury or 
damage to the unit.
These symbols are used to 
alert operators to a specific 
operating procedure that 
must not be performed.
This symbol is used to alert 
operators to a specific 
operating procedure that 
must be emphasized in 
order to operate the unit 
safely.
These symbols are used to 
alert operators to a specific 
operating procedure that 
must be performed 
carefully.
WARNING
CAUTION
Have the unit installed, removed and 
disposed of only by qualified service 
personnel.
Do not position the unit in a location 
where it is unstable.
When the unit will no longer be used, in 
order to prevent it from falling, do not 
leave the unit installed, but remove it. If 
the unit falls, it can cause injury.
Do not alter the unit or modify any parts. 
Alteration or modification can cause 
injury.
WARNING
UE-608030_EN.book  4 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							5
Operating Instructions
For Your Safety
Installation and Relocation
Operating Safeguards
When the stand is to be moved, get 
another person to help you and move it 
together.
Otherwise, it may cause injury.
Lock the casters (when using the stand) 
both after installation has been completed 
and after the stand has been moved.
If the stand is used with the casters 
unlocked, it may move or be overturned 
and/or cause injury.
After completing the installation or moving 
the stand to another location, be 
absolutely sure to attach the foot 
reinforcing assemblies to prevent the 
stand from toppling.
Take care to prevent your fingers from 
being pinched while the elite Panaboard 
is moving up or down.
Otherwise, it may cause injury.
CAUTION
Locking the 
casters
(Push to lock)
When items are to be placed on the table 
plate, put them toward the rear of the 
board.
Otherwise, they may be sandwiched 
between the table plate and elite 
Panaboard while the board is moving up 
or down, and this may damage the 
system.
Do not allow children to play near the elite 
Panaboard, stand on it or crawl under it.
Children may become sandwiched 
between the elite Panaboard and the 
table plate when the board is moving 
down or they may overturn the stand 
accidentally.
Do not allow children to hang or swing 
from the projector or arm.
The system may be overturned or 
damaged and/or the children may be 
injured.
Do not trip over the stand’s feet.
Otherwise, it may cause injury.
Take care not to bang your head against 
the projector.
This is an overhead projector so you may 
bang your head against it depending on 
the height of the up/down part. 
Be careful around the projector ventilation 
area, which becomes hot.
Working in this area or touching nearby 
objects may cause injury. 
UE-608030_EN.book  5 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							6 Operating Instructions
For Your Safety
Warning Label
!1
!2
!3
!4!5
!6
!3 !4
!5
!6
!6
!1
!2
!5
Side View
Side View
UE-608030_EN.book  6 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							7
Operating Instructions
Usage
Usage
Included Accessories
Check that the following item is included with your up/down wall kit or up/down stand kit.
•Operating Instructions - - - 1
Names and Uses of the Parts
∫ When using with the stand∫  When mounting onto a wall
!1
Projector Arm The projector is mounted on this pipe which, when the elite Panaboard is moved 
using the stand, can be turned clockwise or counterclockwise until the arm is made 
parallel with the screen.
!2Projector BracketThis is used to mount the projectors made by several companies. The actual 
projector mounting is carried out by the service engineer so consult the engineer 
concerning the mounting of the projector.
!3elite Panaboard
The elite Panaboard can be installed on the stand or on the wall.
(model UB-T780, UB-T781, UB-T781W, UB-T880 or UB-T880W)
!4Safety BrakeThis can be applied to ensure that the elite Panaboard w
ill not move up or down.
!5Pin End Stoppers
These are put into place at some point along the up/down moving range to ensure that the 
projector will not suddenly drop down to a lower position. Before lowering the projector to 
its lowest position and, with the pin end stoppers pushed in, lower the up/down frame.
!6
Foot Reinforcing 
Assemblies (Only 
when the stand is 
used)When using the system with the stand, make sure that the foot reinforcing 
assemblies are installed to prevent the system from toppling over. Before moving 
the stand, be absolutely sure to remove the foot reinforcing assemblies from the 
stand base.
!7Casters (Only when 
the stand is used)Further movement of the stand can be prevented by locking the rear casters.
!8Table Plate (Only when 
the stand is used)The equipment (such as a notebook computer) to be used along with the elite 
Panaboard can be placed on the table plate.
!2
!2
!3
!3 !4
!4
!4 !5
!1
!7 !8
!7
!6
Rear View
UE-608030_EN.book  7 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							8 Operating Instructions
Usage
Checkpoints When Installing the Equipment on the 
Ta b l e  P l a t e
There are limits on the dimensions of the equipment which can be placed on the table plate so check them out.
Stand Part (Front)
1,150 mm (3 ft. 99/32in.)
Stand Part (Side)
11 0  m m  ( 411/32in.)350 mm (1 ft. 1
25/32in.)
Notebook Computer
UE-608030_EN.book  8 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							9
Operating Instructions
Usage
Securing the Stand
Once you are satisfied with where the stand has been 
installed, lock the casters and secure the stand prior to 
use.
Moving the elite 
Panaboard Up or Down
Take hold of the board side frame or board bottom, 
and move the elite Panaboard or down. (The figure 
provided here shows the elite Panaboard and projector 
being used with the stand.)
•Adjustable range of height
Highest point: 2,120 mm (6 ft. 1115/32in.)
Point at which the elite Panaboard is stopped by the 
first pin end stopper: 1,865 mm (6 ft. 1
7/16in.)
Lowest point: 1,670 mm (5 ft. 53/4in.)
(Usually, the elite Panaboard is used at a height 
between the highest point and the point at which it is 
stopped by the pin end stopper.) Note
•The preceding height is the height of the elite 
Panaboard unit. (Not including the height of the 
projector arm.)
•The screen of models UB-T880 and UB-T880W serves 
as a touch sensor. Avoid touching the screen surface 
when raising or lowering the board, because your 
finger will be detected and the cursor or electronic pen 
position (where the screen was touched previously) will 
move to position you touch. 
Once you have decided on the height at which the
elite Panaboard is to be used, pull the safety brake
lever down to secure the board in place.
Locking the casters
(Push to lock)
Safety Brake
UE-608030_EN.book  9 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分 
						

							10 Operating Instructions
Usage
The pin end stoppers are provided at points along the 
450 mm (1 ft. 523/32in.) adjustment range. Use them at 
points in the range from the highest point and at the 
point where the elite Panaboard will be stopped by the 
stoppers. When the system is to be moved, release 
the safety brake ( 1) and simultaneously push one pin 
end stopper (the one on the safety brake side) ( 2) and 
lower the elite Panaboard slightly. Then 
simultaneously push the other pin end stopper and 
lower the elite Panaboard to the lowest point.
 After 
lowering the elite Panaboard to the lowest point, pull 
the safety brake lever to secure the board.
Notice
•When pushing the pin end stoppers and then moving 
the elite Panaboard down to an even lower position, 
remember that the projector will also be lowered at 
the same time. Take care to prevent the projector from 
hitting your head or other parts of your body.
•Similarly, the up/down part on which the elite 
Panaboard is installed will also move down to a low 
position so exercise care when tall equipment has 
been placed on the table plate.
•Be careful to avoid pinching your finger in the pin end 
stopper hole.
Using the elite Panaboard
1Turn on the power of the computer and 
projector.
2When an image has appeared on the screen of 
the elite Panaboard, adjust the projector. (Refer 
to  “Adjusting the Screen Image ” (page 10).)
3Turn on the power of the elite Panaboard.
4Proceed with calibration.
(Refer to the Operating Instructions of the elite 
Panaboard unit.)
Adjusting the Screen 
Image
If the desktop screen image displayed has trapezoidal 
distortion or if it is out of focus, adjust the projector, 
and optimize the image.
Note
•If projected images are distorted because the 
projector lens has become deformed, it may not be 
possible to align the position touched on the screen 
with the display position even by performing 
calibration.
 

 
Pin End Stopper
(Safety Brake Side)
Safety Brake
A
UE-608030_EN.book  10 ページ  ２０１０年１０月２８日　木曜日　午後４時２０分