Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

31English
   
4 Input multi display
 

English32
   
Switching the input of “4-screen 
display”
  1 
Select the screen with    .
 
HDMI1
HDMI3
HDMI2
HDMI4
 
Frame
  Frame appears when the cursor buttons are 
pressed. Move the frame to the screen you want to 
switch input.
●   The frame disappears when there is no operation 
for more than 5 seconds.
●   The frame also appears when the following 
buttons are pressed:
   
  Move it using the cursor buttons.
 
2 
Press  to switch input.
 
Selecting the input signal (see page 28)
 
 
HDMI1
HDMI3...

33English
   
On-Screen Menu 
Displays
  1 
Display the menu screen.
 
Remote Control  Unit
 
  Press to select. 
MENU
VOL+/
-/  Press for 
several times.
  Each time the button is 
pressed, the menu screen 
will switch.
  Normal Viewing → 
[Picture] → [Setup] → 
[Position] → [Sound]
  2 
Select the item.
  
VOL
ENTER/
+/
-/
  Press.
 
  Press to 
select.
 
  (Example: [Picture] menu)
 
80
50
50
50
50
0
  Picture
  Default  Default
 
Picture mode  Normal
 
2.2
  6500K   Backlight
  Contrast
  Brightness...

English34
   
Adjusting Position
 
1 
Press  to display the 
[Position] menu.
 
 
0 0
0
0
0
0
0   Position
  Default  Default
  Auto setup 
H-position 
H-size
  V-position
  V-size
  Dot clock
  Clock phase
  Clamp position
  Over scan
  On
 
2 
Select the item to adjust with  .
 ●  
Unadjustable items are greyed out.
  Adjustable items differ depending on the input 
signal and the display mode.
  3 
Adjust with  .
 
4 
Press  to exit from adjust 
mode.
  ■ 
 
To return to the previous screen
 
Press ....

35English
  [H-position] 
Adjust the horizontal position with  .
 
  
  [H-size] 
Adjust the horizontal size with 
 .
 
 
  [V-position] 
Adjust the vertical position with  .
 
 
  [V-size] 
Adjust the vertical size with  .
 
 
  [Dot clock]  (During PC input signal)
  Periodic striped pattern interference 
(noise) may occur when a striped pattern 
is displayed. If this happens, adjust so 
that any such noise is minimized.
  [Clock 
phase]  (During PC input signal)
  In some cases, frame of the screen...

English36
   
Sound Adjustment
 
1 
Press  to display the 
[Sound] menu.
 
 
0
0
0
0   Sound
  Default  Default
 
Output select  SPEAKERS 
Normal
  Off
  Off   Sound mode
  Bass
  Mid
  Treble
  Balance
  Surround
 
4 Input multi display audio select
 
2 
Select the item to adjust with  .
 ●  
Menu that cannot be adjusted is greyed out. 
Adjustable menu changes depending on signal, 
input and menu setting.
  3 
Select the desired level with   by 
listening to the sound.
  4 
Press  to exit from adjust...

37English
   
Picture Adjustments
 
1 
Press  to display the 
[Picture] menu.
 
 
80
50
50
50
50
0
  Picture
  Default  Default
 
Picture mode  Normal
 
2.2
  6500K   Backlight
  Contrast
  Brightness
  Colour
  Hue
  Sharpness
  Gamma
  Colour temperature
 
FRAME CREATION
 
Memory save
  Memory load
  Memory edit  Off
 
2 
Select the item to adjust with  .
 ●  
Menu that cannot be adjusted is greyed out. 
Adjustable menu changes depending on signal, 
input and menu setting.
  3 
Select the desired level...

English38
  [Colour 
temperature]  Adjusts colour tone.
  [3000K] - [11500K], [USER1], 
[USER2], [USER3]
  Note
●  
Emphasizes red when the 
numerical value of [Colour 
temperature] is small, and 
emphasizes blue when it is big.
  You can select [USER1] - 
[USER3] when you set the 
following user settings.
  User setting of [Colour 
temperature]
  3 kinds of detailed [Colour 
temperature] settings can be 
stored.
 
  1 
Press  while setting 
[Colour temperature].
 
02.2  6500K
 
Sharpness
  Gamma...

39English
   
Picture Profiles
 

English40
  Note
●