Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

21English
  Pin assignments and signal names for SERIAL 
Terminal
 
6789
1 3 4 52
 
Pin No.  Signal Name
 
  NC (not connected)
 
  RXD
 
  TXD
 
  Non use
 
  GND (Ground)
 
  Non use
 
  RTS
   Shorted in this set
   CTS
 
  NC (not connected)
  These signal names are those of computer 
specifications.
  Communication parameters
  Signal level: RS-232C compliant
  Synchronization method: Asynchronous
  Baud rate: 9600 bps
  Parity: None
  Character length: 8 bits
  Stop bit: 1 bit
  Flow control: None...

English22
  Note
●  

23English
   
AUDIO OUT terminal connection
 
 
line-in
 
 Stereophonic sound code (not supplied)
 
 Audio equipment
  Note
●  
Audio equipment and the cable shown are not 
supplied with this set.
●   To output sound from AUDIO OUT Terminal of the 

English24
   
Identifying Controls
 
 
Main Unit
  
1  Power Indicator
  The Power Indicator will light.
  When the power of the unit is ON (Main Power On 
/ Off switch: ON)
●   Picture is displayed: Green
●  
Power OFF (Standby) with remote control: Red
  When [Network control] is set to [On] (see page 
54): Orange
●   Power OFF with “Power management” function: 
Orange
  “Power management” function (see page 48)
  When the power of the unit is OFF (Main Power 
On / Off switch: OFF): No light
  Note
●...

25English
   
Remote Control Transmitter
 
 
1  POWER ON ()
●  
Turns the power on (Picture is displayed.) when 

English26
   
Basic Controls
 
 
Power Indicator  Remote Control Sensor
  Main Power On / 
Off switch
  AC socket outlet
  Power supply cord (supplied)
  Operate pointing the remote control directly at 
the unit’s Remote Control Sensor.
 
 
  1 
Connect the AC cord plug to the 
Display.
  (see page 14)
 
2 
Connect the plug to the socket outlet.
 
Note
●  
Main plug types vary between countries. The power 
plug shown at left may, therefore, not be the type 
fitted to your set.
●   When disconnecting the...

27English
  ■ 
When the Unit is turned on for the first time
 
Following screen will be displayed.
  

English28
   
Selecting the input signal
 
Select the signals input to the unit.
  Press  or .
 
  Unit
 
INPUTMENU
VOL
ENTER/
+/
-/
  Switches input every time the buttons are pressed.
●  
Or, press , select the input with   and 
press  to set.
 
1
2
3
4
5
6
7
8
9HDMI1
HDMI2
HDMI3
HDMI4
DisplayPort
DIGITAL LINK
DVI-D
PC
SDI1
SDI2
SDI3
SDI4 INPUT
  1 
Input in HDMI 1 terminal (Supports 4K picture)*
  2 
Input in HDMI 2 terminal (Supports 4K picture)*
  3 
Input in HDMI 3 terminal*
  4 
Input in HDMI 4...

29English
   
Volume Adjustment
 
Press   or   to adjust volume.
 
  Unit
 
INPUTMENU
VOL
ENTER/
+/
-/
 20  Volume
●  

English30
   
ASPECT Controls
 
Press  or  repeatedly to 
move through the aspect options:
 
  Unit
 
INPUTMENU
VOL
ENTER/
+/
-/