Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

11English
   
Accessories
 
 
Accessories Supply
 

English12
●   Dispose the Power supply cord cap and packaging 

13English
   
Vertical Installation
 
When installing the Display vertically, be sure that the 
Power Indicator comes to the downside.
  

English14
   
Connections
 
 
AC cord connection and fixing
 
Back of the unit
  
AC cord fixing
 
  AC cord (supplied)
 
Plug the connector into the display unit.
  Plug the AC cord until it clicks.
  Note
●  
Make sure that the AC cord is locked on both the 
left and right sides.
  Unplug the AC cord
 
  Unplug the connector pressing the two knobs.
  Note
●  
When disconnecting the AC cord, be absolutely 
sure to disconnect the AC cord plug at the socket 
outlet first.
 
   
Cable fixing
 
Note
●  

15English
   
Video equipment connection
 
 
 
1 AUDIO OUT:  Analogue Audio Output Terminal
  Connect to audio equipment with 
analogue audio input terminal.
  (see page 23)
  2 SERIAL:  Serial Control Terminal
  Control the Display by connecting 
to PC.
  (see page 20)
  3 DisplayPort:  DisplayPort Input Terminal 
(Supports 4K picture)
  Connect to PC or video equipment 
with DisplayPort output terminal.
  (see page 19)
  4 DIGITAL LINK / 
LAN*
:  DIGITAL LINK Input Terminal 
(Supports 4K picture)...

English16
   
HDMI 1 to 4 terminals connection
 
HDMI 1 and HDMI 2 terminals support 4K picture. 
Patterns of 4K picture input are as follows.
  Note
●  

17English
  Pin assignments and signal names for HDMI 
Terminal
 
  Pin No.  Signal name
  
T.M.D.S Data2+
  
T.M.D.S Data2 Shield
  
T.M.D.S Data2-
  
T.M.D.S Data1+
  
T.M.D.S Data1 Shield
  
T.M.D.S Data1-
  
T.M.D.S Data0+
  
T.M.D.S Data0 Shield
  
T.M.D.S Data0-
  
T.M.D.S Clock+
  
T.M.D.S Clock Shield
  
T.M.D.S Clock-
  
CEC
  
  
SCL
  
SDA
  
DDC/CEC Ground
  
+5V DC
  
Hot Plug Detect
 
   
DVI-D IN terminal connection
 
Note
●  
Additional equipment and cables shown are not 
supplied with...

English18
  Pin assignments and signal names for DVI-D 
Input Connector
 
  Pin No.  Signal Name
  
T.M.D.S. data 2-
  
T.M.D.S. data 2+
  
T.M.D.S. data 2 shield
  
  
  
DDC clock
  
DDC data
  
  
T.M.D.S. data 1-
  
T.M.D.S. data 1+
  
T.M.D.S. data 1 shield
  
  
  
+5 V DC
  
GND (Ground)
  
Hot plug detect 
  
T.M.D.S. data 0-
  
T.M.D.S. data 0+ 
  
T.M.D.S. data 0 shield
  
  
  
T.M.D.S. clock shield
  
T.M.D.S. clock+
  
T.M.D.S. clock-
 
   
PC IN terminal connection
 
 
Connect a cable...

19English
●   

English20
  Pin assignments and signal names for DisplayPort
 
  Pin No.  Signal Name
  
ML_Lane 3 (n)
  
GND (Ground)
  
ML_Lane 3 (p)
  
ML_Lane 2 (n)
  
GND (Ground)
  
ML_Lane 2 (p)
  
ML_Lane 1 (n)
  
GND (Ground)
  
ML_Lane 1 (p)
  
ML_Lane 0 (n)
  
GND (Ground)
  
ML_Lane 0 (p)
  
CONFIG1
  
CONFIG2
  
AUX_CH (p)
  
GND (Ground)
  
AUX_CH (n)
  
Hot Plug Detect
  
GND (Ground)
  
+ 3.3 V DC output
 
   
SERIAL terminal connection
 
The SERIAL terminal conforms to the RS-232C interface