Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

							31English
   
4 Input multi display
 

						

							English32
   
Switching the input of “4-screen 
display”
  1 
Select the screen with    .
 
HDMI1
HDMI3
HDMI2
HDMI4
 
Frame
  Frame appears when the cursor buttons are 
pressed. Move the frame to the screen you want to 
switch input.
●   The frame disappears when there is no operation 
for more than 5 seconds.
●   The frame also appears when the following 
buttons are pressed:
   
  Move it using the cursor buttons.
 
2 
Press  to switch input.
 
Selecting the input signal (see page 28)
 
 
HDMI1
HDMI3
HDMI2
PC
 
Note
●  

						

							33English
   
On-Screen Menu 
Displays
  1 
Display the menu screen.
 
Remote Control  Unit
 
  Press to select. 
MENU
VOL+/
-/  Press for 
several times.
  Each time the button is 
pressed, the menu screen 
will switch.
  Normal Viewing → 
[Picture] → [Setup] → 
[Position] → [Sound]
  2 
Select the item.
  
VOL
ENTER/
+/
-/
  Press.
 
  Press to 
select.
 
  (Example: [Picture] menu)
 
80
50
50
50
50
0
  Picture
  Default  Default
 
Picture mode  Normal
 
2.2
  6500K   Backlight
  Contrast
  Brightness
  Colour
  Hue
  Sharpness
  Gamma
  Colour temperature
 
FRAME CREATION
 
Memory save
  Memory load
  Memory edit  Off
 
Submenu
  Press  to display the submenu.
 
3 
Set.
  
VOL
ENTER/
+/
-/
  Press.
 
  Press to 
select.
  4 
Exit from the menu.
  
Press. 
MENU  Press for 
several times.
  Press  to return to the previous screen.
  Menu display list
●  
Menu that cannot be adjusted is greyed out. 

						

							English34
   
Adjusting Position
 
1 
Press  to display the 
[Position] menu.
 
 
0 0
0
0
0
0
0   Position
  Default  Default
  Auto setup 
H-position 
H-size
  V-position
  V-size
  Dot clock
  Clock phase
  Clamp position
  Over scan
  On
 
2 
Select the item to adjust with  .
 ●  
Unadjustable items are greyed out.
  Adjustable items differ depending on the input 
signal and the display mode.
  3 
Adjust with  .
 
4 
Press  to exit from adjust 
mode.
  ■ 
 
To return to the previous screen
 
Press .
  ■ 
 
To reset to defaults
 
Press  while the menu is displayed, or 

						

							35English
  [H-position] 
Adjust the horizontal position with  .
 
  
  [H-size] 
Adjust the horizontal size with 
 .
 
 
  [V-position] 
Adjust the vertical position with  .
 
 
  [V-size] 
Adjust the vertical size with  .
 
 
  [Dot clock]  (During PC input signal)
  Periodic striped pattern interference 
(noise) may occur when a striped pattern 
is displayed. If this happens, adjust so 
that any such noise is minimized.
  [Clock 
phase]  (During PC input signal)
  In some cases, frame of the screen 
appears blurred or smudged, when RGB 
signal or PC signal are input.
  [Clamp 
position]  (During PC input signal)
  Adjusts the clamp position when black 
parts of the image have no detail due to 
underexposure or are tinged with green.
  Optimum value for Clamp Position 
adjustment
  When black parts have no detail due to 
underexposure (blackout)
●   Value that causes least blackout is the 
optimum.
  When black parts are tinged with green
●  
Value that cancels the greenishness 
without causing blackout is the 
optimum.   
[Over scan] 
Turn image over scan On/Off.
  Configurable signals are as follows:
  525i, 525p, 625i, 625p, 750/60p, 750/50p 
(Component Video, RGB, DVI-D, SDI, 
HDMI)
  1125 (1080) / 60i, 50i, 60p, 50p, 24p, 
25p, 30p
 
 
  [On]  [Off]
 
Note
●  
This menu cannot be adjusted during 
4K mode.
●   When [Off] is set, [H-size] and [V-size] 
cannot be adjusted.
  Note
●  
In some cases, noise appears outside the area 
picture is displayed, but it is not a malfunction. 
						

							English36
   
Sound Adjustment
 
1 
Press  to display the 
[Sound] menu.
 
 
0
0
0
0   Sound
  Default  Default
 
Output select  SPEAKERS 
Normal
  Off
  Off   Sound mode
  Bass
  Mid
  Treble
  Balance
  Surround
 
4 Input multi display audio select
 
2 
Select the item to adjust with  .
 ●  
Menu that cannot be adjusted is greyed out. 
Adjustable menu changes depending on signal, 
input and menu setting.
  3 
Select the desired level with   by 
listening to the sound.
  4 
Press  to exit from adjust 
mode.
  ■ 
To return to the previous screen
 
Press .
  ■ 
 
To reset to defaults
 
Press  while the menu is displayed, or 

						

							37English
   
Picture Adjustments
 
1 
Press  to display the 
[Picture] menu.
 
 
80
50
50
50
50
0
  Picture
  Default  Default
 
Picture mode  Normal
 
2.2
  6500K   Backlight
  Contrast
  Brightness
  Colour
  Hue
  Sharpness
  Gamma
  Colour temperature
 
FRAME CREATION
 
Memory save
  Memory load
  Memory edit  Off
 
2 
Select the item to adjust with  .
 ●  
Menu that cannot be adjusted is greyed out. 
Adjustable menu changes depending on signal, 
input and menu setting.
  3 
Select the desired level with   by 
looking at the picture behind the 
menu.
  4 
Press  to exit from adjust 
mode.
  ■ 
To return to the previous screen
 
Press .
  ■ 
 
To reset to defaults
 
(except [FRAME CREATION])
  Press  while the menu is displayed, or 

						

							English38
  [Colour 
temperature]  Adjusts colour tone.
  [3000K] - [11500K], [USER1], 
[USER2], [USER3]
  Note
●  
Emphasizes red when the 
numerical value of [Colour 
temperature] is small, and 
emphasizes blue when it is big.
  You can select [USER1] - 
[USER3] when you set the 
following user settings.
  User setting of [Colour 
temperature]
  3 kinds of detailed [Colour 
temperature] settings can be 
stored.
 
  1 
Press  while setting 
[Colour temperature].
 
02.2  6500K
 
Sharpness
  Gamma
 
Colour temperature
 
Example:  When [Colour 
temperature] is 
[6500K], it is possible 
to reflect the set point, 
[6500K], to the set 
point of [USER1] to 
[USER3].
 
  2 
Select the user to memorise 
settings with 
  and press 
.
 
  Adjust colour temperature
  Change to 6500K
 
USER1 
USER2
  USER3
 
  3 
Select [Ok] with   and press 
.
 
  Adjust colour temperature
  Overwrite colour temperature “USER1”?
 
Ok 
Cancel
 
  4 
Set each item on detail settings 
screen.
 
 




  Adjust colour temperature
  USER1
 
R gain 
G gain
  B gain
  R bias
  G bias
  B bias
   [R gain]
  Adjusts the white balance for light 
red areas.
  0 (colour temperature high) to 
255 (colour temperature low)
   [G gain]
  Adjusts the white balance for light 
green areas.
  0 to 255
   [B gain]
  Adjusts the white balance for light 
blue areas.
  0 (colour temperature low) to 255 
(colour temperature high)
   [R bias]
  Adjusts the white balance for dark 
red areas.
  -120 (colour temperature high) to 
+120 (colour temperature low)
   [G bias]
  Adjusts the white balance for dark 
green areas.
  -120 to +120
   [B bias]
  Adjusts the white balance for dark 
blue areas.
  -120 (colour temperature low) to 
+120 (colour temperature high)
   The settings are memorised 
separately for each input terminal.
  When you return to [Picture] 
menu, the user you have set is 
selected for [Colour temperature].
 
52.2  USER1
 
Sharpness
  Gamma
 
Colour temperature
 
 
[FRAME 
CREATION]  Improves motion picture quality.
  Select [Off] when the motion 
picture looks unnatural.
  Note
●  
The mode is memorised per 
input terminal.
  During 4 Input multi display, 
all the 4 screens are switched 
to On / Off. The mode is also 
memorised separately from that 
of 1-screen display.
●   Even when [Default] is 
selected, the Normal setting will 
not be restored.
●   The picture and the menu will 
disappear for a moment after 
you changed settings. 
						

							39English
   
Picture Profiles
 

						

							English40
  Note
●