Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

							51English
   
On/Off timer settings
 
Set to turn the power on / off automatically.
 
0:00 0:0010:00   On/Off timer settings
 
Power on function 
Time
  Power on time 
Off
 
Power off function
  Power off time  Off
  ■ 
To turn the power on or off at the time set
   Select [Power on time] or [Power off time].
 
  Set [Power on time] or [Power off time].
●  
Press   once to change the time by 1 minute.
  Keep pressing down to change the time by 15 
minutes.
 
0:00 0:0010:00   On/Off timer settings
  Power on function  Time
 
Power on time 
Off
  Power off function
 
Power off time 
Off
   Select [Power on function] or [Power off function].
 
 Set to [On].
 
0:00 0:0010:00   On/Off timer settings
 
Power on function 
Time
  Power on time 
Off
  Power off function
 
Power off time 
Off
 
Note
●  
Please set [Time] first. (see page 51)
 
   
Day/Time settings
 
Set day and the current time.
  (They are not set when [99:99] is displayed.)
 
18:0099:99   Day/Time settings
  Set
 
MONDAY 
Time
 
Day  MONDAY 
Time
  ■ 
Set [Day] and [Time]
   Select [Day] or [Time].
 
  Set [Day] or [Time].
●  
Press   once to change the time by 1 minute.
  Keep pressing down to change the time by 15 
minutes.
 
18:0099:99   Day/Time settings
  Set
 
MONDAY 
Time
 
Day  TUESDAY
  Time
   Select [Set] and press .
 
18:0018:00   Day/Time settings
 
Set 
TUESDAY 
Time
  Day  TUESDAY
  Time
 
Note
●  
[Set] cannot be selected unless [Time] is set.
●  
The settings of [Day] and [Time] are reset when 
leaving the display turned off for more than about 7 
days for the following reasons:
  • 
 was pressed to 
turn off the display.
  • 
The AC cord was disconnected.
  • 
Interruption of power supply.
●  

						

							English52
   
HDMI 4K Interface
 

						

							53English
   
OSD language
 
Select your preferred language.
  Selectable languages
  English(UK) 
  Deutsch 
  Français 
  Italiano 
  Español 
  ENGLISH(US) 
  中文  : Chinese
  日本語  : Japanese
  Русский 
: Russian
 
   
Network settings
 
Set when networking with a computer.
  [Network settings] submenu will be displayed.
 
  Network settings
 
LAN setup
 
On
  Off
  Auto(LAN)
  Off   Name change
  Network control
  DIGITAL LINK   AMX D.D.
  DIGITAL LINK status
  Digital Interface Box
  DIGITAL LINK mode
  Extron XTP  Off  
Crestron Connected™
 
Note
●  
The remote control is used for all the [Network 
settings] menu operations. Unit buttons cannot be 
used for these operations.
  ■ 
 
[LAN setup]
 

						

							English54
  [Subnet mask]:
  (Subnet mask display and setting)
  Enter a Subnet mask when DHCP server is not 
used.
  [Gateway]:
  (Gateway address display and setting)
  Enter a gateway address when DHCP server is not 
used.
  Note
●  
IP address will not be displayed when [DHCP] is 
set to [On].
   
Entering numbers
  1.   Select the item and press .
  2.   Select digits with 
 .
  3.   Change numbers with numeric buttons ( - 
).
  It is also possible to change with 
 .
  4.   Press .
  You can cancel the change by pressing 
.
 
  Select [Save] and press .
  Save the current network Setup.
 
Note
●  
To use a DHCP server, make sure the DHCP server 
is started.
●    
address], [Subnet mask] and [Gateway].
●   Shipping condition
  [DHCP]: Off
  [IP address]: 192.168.0.8
  [Subnet mask]: 255.255.255.0
  [Gateway]: 192.168.0.1
  [Port]
  Set the port number used for command control.
  Select [Port] and press  to set the number.
●  
The available setting range is 1024 - 65535.
●  
Entering numbers (see page 54)
 
Note
●  

						

							55English
  ■ 
 
[Crestron Connected™]
 

						

							English56
   
Options Adjustments
 
This unit offers special functions conveniently used 

						

							57English
   
Weekly command timer
 
Y
						

							English58
   
Audio input select
 
Set up the sound when an image input is selected.
 
Select image input with  .
  Select audio input with 
 .
 
HDMI1
HDMI2
HDMI3
HDMI4
DisplayPort
DIGITAL LINK
DVI-D
PC
SDI1AUDIO IN
AUDIO IN DIGITAL LINKDisplayPortHDMI4
HDMI3
HDMI2
HDMI1
AUDIO IN   Audio input select
 
Image input  Audio input
  HDMI1
  HDMI1 / AUDIO IN / NO AUDIO
  HDMI2 
HDMI2 / AUDIO IN / NO AUDIO
  HDMI3 
HDMI3 / AUDIO IN / NO AUDIO
  HDMI4 
HDMI4 / AUDIO IN / NO AUDIO
  DisplayPort 
AUDIO IN / DisplayPort / 
NO AUDIO
  DIGITAL LINK 
AUDIO IN / DIGITAL LINK / 
NO AUDIO
  DVI-D / PC 
AUDIO IN / NO AUDIO
  SDI1*
  SDI1*
/ AUDIO IN / NO AUDIO
●   [NO AUDIO]: No audio input (Mute)
 *:  When a Terminal Board is installed to the SLOT, its 
T
						

							59English
  Onscreen display
 
.
●  
Power on display
●  
Input signal switch display
●  
No signal display
●  
MUTE display after displaying the menu screen
●  
MUTE and off timer remaining time display after 
 is pressed
●   Off timer remaining time display when 3 minutes 
remaining
  [On]: 
Displays the Onscreen display.
  [Off]: 
Hides the Onscreen display.
 
Initial input
 

						

							English60
  Button lock
 
Limits operation of the buttons on the unit.
 
[Off]: 
All the buttons on main unit can 
be used.
  [MENU&ENTER]: 
Locks  and 
 buttons.
  [On]: 
Locks all the buttons on the unit.
  ■ 
To set [Button lock]
 
Set with the buttons on the unit.
  [Off]:
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press .
  [MENU&ENTER]:
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press .
  [On]:
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press  for 4 times.
 
  Press .
 
 
Controller user level