Panasonic UHD LCD Display TH-84LQ70U Operating Instructions

							61English
  Serial ID function
 

						

							English62
  Power on screen delay
 
Y
						

							63English
   
Power on message(Power 
management)
  
						

							English64
   
Using Network 
Function
  
						

							65English
  ■ 
 
DIGITAL LINK Terminal connection
 
A twisted pair cable transmitter, such as the 
Panasonic Digital Interface Box (ET-YFB100G), uses 

						

							English66
   
Command control
 

						

							67English
  Command  Control
  ERST?  Error status query
  First byte:  Fan error. 0 or 2.
  Second byte: 0
  Third byte: 0
  Fourth byte: 0
  Fifth byte: 0
  Sixth byte:  Other error. 0 or 2.
●  
Meaning of 0, 2.
  0:  Error is not detected,
  2: Error
  LAMP?  Lamp status query
  Not supported
  INST?  Input switch list query
●  
The numbers from 12 to 15 depend 
on the installed SLOT.
  31: HDMI1 input (HDMI1)
  32: HDMI2 input (HDMI2)
  33: HDMI3 input (HDMI3)
  34: HDMI4 input (HDMI4)
  35:  DisplayPort input (DisplayPort)
  36:  DIGITAL LINK input (DIGITAL 
LINK)
  37: DVI-D IN input (DVI-D)
  11: PC IN input (PC)
  When installed “3G-SDI Terminal Board 
with Audio” to either SLOT 1 or SLOT 2.
  12:  SDI1 input / SDI3 input (SDI1 / 
SDI3)
  13:  SDI2 input / SDI4 input (SDI2 / 
SDI4)
  When installed “3G-SDI Terminal Board 
with Audio” to both SLOT 1 and SLOT 
2.
  12: SDI1 input (SDI1)
  13: SDI2 input (SDI2)
  14: SDI3 input (SDI3)
  15: SDI4 input (SDI4)
  NAME?  Display name query
  The name selected in [Network 
settings] is returned.
  INF1?  Manufacturer name query
  Returns “Panasonic”.
  INF2?  Model name query
  Returns “84LQ70U”.
  (Example: 84-inch U model)
  Returns “84LQ70W”.
  (Example: 84-inch W model)
  INFO?  Other information query
  Returns version number.
  CLSS?  Class information query
  Returns “1”.
  PJLink security authentication  
						

							English68
   
Connecting with 
LAN
  Note
●  
To use the network function, set each item in 
[Network settings] and be sure to enable LAN in 
[Network control] and [DIGITAL LINK mode]. (see 
page 55)
   
Computer operation
 
1 
Turn on the computer.
 
2 
Make the network setting according to 
your system administrator.
  
						

							69English
  Enable JavaScript
  1 Display [Security] of Safari.
  2 Select [Enable JavaScript] under [Web content].
 
 
Access from Web Browser
 
Access to the TOP screen of the Web browser control 
using a Web browser.
  1 
Start your Web browser.
 
2 
Enter the IP address set with the [LAN 
setup] of the unit.
  (see page 53)
 
  3 
Enter the user name and password 
when the Authentication screen is 
displayed.
 
  4 
Click [OK].
 
After logged in, the TOP screen of the Web Browser 
Control is displayed. (see page 69)
  Note
●  
The password used here is the same password 
used for command control and the PJLink security 
authentication.
●   Default user name and password are as follows:
  User name: user1 (user rights)
  Password: panasonic
  Change password first.
●  
The password can be changed on the Password 
Setup screen after logging in (see page 70). The user 
name cannot be changed.
●   When using “Early Warning Software” (see page 67), 
log in with the administrator rights.
  User name: admin1 (administrator rights)
  Password: panasonic
●  
Under no circumstances, Panasonic Corporation or 
its associated companies will ask customers their 
password directly.
  Even if you are asked directly, please do not reveal 
your password.
   
Operating with Web Browser
  ■ 
 
Description of each section
 
After logging in, the TOP screen of the Web browser 
control is displayed.
 
   
						

							English70
  [OPTION CONTROL] screen
 
Click [OPTION CONTROL] from the menu. Command