Panasonic Uf 790 Operating Instructions Manual

Configuring the Printer Driver Settings
41
Windows 2000/XP (Administrator)
Printer Section
Device Options Tab
1.Number of Paper Tray
Select the number of available paper trays for the printer if an optional Paper Feed Module is installed.
2. button
Select the method of expressing device halftone (printer-specific halftone). Select the settings according
to printing data and preference.
•Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the image would...

Configuring the Printer Driver Settings
42
Windows 2000/XP (Administrator)
•Pixel Diameter
Adjust the darkness of the print image. Manipulate the slider to specify the pixel size. You can select
between specifying the real size in inches or specifying in percentage relative to the printer resolution.
•Luminance (CIE Y)
Adjust the luminosity of the print image.
3.  button
Displays the version information about the printer driver.
NOTE1.Device Options Tab specifies device-specific settings and settings of...

Configuring the Printer Driver Settings
43
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by a user, upon executing a print operation on an
application. See Settings Printer Driver on Windows 2000/XP (Administrator) for details of
administrator (system manager) properties.  (See page 34)
Windows 2000/XP...

Configuring the Printer Driver Settings
44
Windows 2000/XP (User)
Main Tab
1.Paper Size
Select a document size.
2.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
3.Copies (1-99)
Specify the number of copies to be printed. If the number of copies to be printed can be specified within
the application, indicate one copy here and specify the number of...

Configuring the Printer Driver Settings
45
Windows 2000/XP (User)
Printer Section
Handling Tab
1.Sorter
Select whether to Stack or Sort when printing multiple copies.
2.Output Order
Specify the output order (Ascending/Descending).
3. button
Return all items in the Handling Tab to standard settings (default).
Restore Defaults 

Configuring the Printer Driver Settings
46
Windows 2000/XP (User)
Quality Tab
1.Resolution
Select the printer resolution (300dpi/600dpi).
2.  button
•Contrast
Adjust the contrast of print images.
•Brightness
Adjust the brightness of print images.
•Dark Picture
Select this option in order to print dark images brighter.
•Negative
Select this option in order to print images with black and white reversed.
Halftone Color Adjustment... 

Configuring the Printer Driver Settings
47
Windows 2000/XP (User)
Printer Section
•Input RGB Gamma
Adjust the gamma of print images (color intensities). Red, Green and Blue can also be adjusted
individually.
•Black Ref/White Ref
Adjust the difference between the darkest and lightest colors of an image. Increasing the Black Ref
value or decreasing the White Ref value will intensify the contrast of the image but reduces the range of
colors in between.
•Picture
Select a test pattern type.
Selecting the View...

48
Print Operation
If the printer driver is installed properly and a printer is selected as the default printer in the printer setup,
printing can be accomplished from any Windows application with simple operations.
To print from most Windows applications, use the Print... command on the File menu. Selecting the Print...
command typically displays the following Print dialog box:
After selecting the print range to be printed and the number of copies, click on   to start printing.
While documents are being...

Print Operation
49
Printer Section
For sharing a printer by connecting two computers via crossed-cable or using a hub, a connection among
computers must be established.
Establishing a connection among computers is verified by displaying the connected computers in Network
Neighborhood on the desktop.
The settings for printer sharing is specified by the following steps:
Printer server (PC connected to a printer)
Upon completion of the setting, the shape of the icon changes indicates it is shared.
NOTE1....

Print Operation
50
Printing on Network
Client workstation (PC that uses other computers printer).
The operations above enable output from the client workstaton to a printer connected to a printer server.
1
Click the Start button, point to Settings, and then click
Printers.
2
Double-click Add Printer in the printers folder.
Add Printer Wizard appears.
Click on the   button.
3
Select Network Printer.
Click on the   button.
4
Specify the other computers printer by entering the
network path.
Then, complete...