Panasonic Uf 790 Operating Instructions Manual

Configuring the Printer Driver Settings
21
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows NT 4.0, setting the properties depends on the log-in account. This section
describes properties to be specified by an administrator (system manager).
2. See Configuring the Printer Driver Settings (User) for details of user properties.  (See page
29)
Windows NT 4.0 (Administrator)
1
Log onto the computer/network with an account...

Configuring the Printer Driver Settings
22
Windows NT 4.0 (Administrator)
General Tab
1.Comment
Enter comments to describe the printer, if desired.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an already set-up user will
remain unchanged even if the comment is modified later.
2.Location
Specify the printer location.
3.Driver
Displays the printer driver type. Specify...

Configuring the Printer Driver Settings
23
Windows NT 4.0 (Administrator)
Printer Section
Ports Tab
1.Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
2. /   button
Adds/deletes a new port or a new network path.
3. button
Configures the selected port. In case of a parallel port, Transmission Retry should be specified.
4.Enable bidirectional support
On a printer, this setting enables...

Configuring the Printer Driver Settings
24
Windows NT 4.0 (Administrator)
Scheduling Tab
1.Available
Schedules the printer for operation. Specify operating hours when From-To is selected.
2.Priority
Sets printing priority. The slider allows the priority to be adjusted from 1 through 99.
3.Spool print documents... / Print directly to the printer
Specify how documents should be sent from the application to the printer.
4.Hold mismatched documents
The spooler compares document settings against printer...

Configuring the Printer Driver Settings
25
Windows NT 4.0 (Administrator)
Printer Section
Sharing Tab
1.Not Shared/Shared
Select whether to display or use this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified at this time will be displayed when other users view information about the
printer on the network.
3.Alternate Drivers
Specify the operating systems of other computers that...

Configuring the Printer Driver Settings
26
Windows NT 4.0 (Administrator)
Security Tab
1. button
Set printer access privileges.
2. button
Displays the persons who used this printer and how they used.
3. button
Set the ownership of the printer.
NOTE1. In order to utilize these features, you need to have selected Audit... from User Managers
Policies and have enabled File and Object Access in the Audit Policy dialog box.
Permissions
Auditing
Ownership 

Configuring the Printer Driver Settings
27
Windows NT 4.0 (Administrator)
Printer Section
Device Option Tab
1.Number of Paper Tray
Select the number of available paper trays for the printer if an optional Paper Feed Module is installed.
2.Halftone Setup
 button
Select the halftoning method to be used (halftones specific to the printer).
Select it according to the details of data and your preference.
•Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the...

Configuring the Printer Driver Settings
28
Windows NT 4.0 (Administrator)
•Pixel Diameter
Adjust the darkness of the print image. Manipulate the slider to specify the pixel size. You can select
between specifying the real size in inches or specifying in percentage relative to the printer resolution.
•Luminance (CIE Y)
Adjust the luminosity of the print image.
3.  button
Displays the version information about the printer driver.
NOTE1.Device Option Tab specifies device-specific settings and settings of...

Configuring the Printer Driver Settings
29
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows NT 4.0, setting properties depends on the log-in account. This section describes
properties to be specified by a user, upon executing a print operation on an application. See
Configuring the Printer Driver Settings (Administrator) for details of administrator properties.
(See page 21)
Windows NT 4.0 (User)
1
Select Print in the...

Configuring the Printer Driver Settings
30
Windows NT 4.0 (User)
Main Tab
1.Paper Size
Select a document size.
2.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
3.Copies (1-99)
Specify the number of copies to be printed. If the number of copies to be printed can be specified within
the application, indicate one copy here and specify the number of...