Panasonic Tv Projection Monitor DhPt 56tw53 Operating Instructions

							PICTURE IN PICTURE AND SPLIT OPERATION9 lPIP Operation (cont.)
•Press  to display search frames.
•Press  again to stop search feature. PIP or
Split frame channel will be the last active search frame.
•Press  or  to cancel PIP or Split frame 
Move Button (PIP only) 
This feature is used to move PIP frame to one of four
corners.
Procedure
•Press  to display PIP frame.
•Press  to position PIP frame to desired corner.
•Press  to cancel PIP frame. 
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX
button to vary the size of PIP frame.
Procedure
•Press  to display PIP frame.
•Press  or  to size PIP frame.
•Press  to cancel PIP frame.
Freeze Button (PIP and Split) 
This feature is used to stop action in PIP or Split frame.
Procedure
•Press  or  to display PIP or Split frame•Press  to stop PIP or Split frame action. 
•Press  again to continue action. 
•Press  or  to cancel PIP frame.      
Main Picture Freeze Feature
This feature is used to stop action of the Main Picture and
display it on a Split or PIP freeze frame.
Procedure
•To stop action for Main picture, press  while
PIP or Split frame is not displayed.
•Main Picture freeze will be displayed in a PIP or Split
frame, depending on the selection in the Freeze menu
located in Picture Other ADJ. section (refer to page 21).
•Press  again to cancel Main Picture freeze
frame.
Note:While Main Picture freeze frame is displayed, only
MOVE button is active for PIP, all other PIP and Split
buttons have no effect  (see chart ).
PIP, Split and Freeze Mode Buttons Operational chart
This chart indicates the buttons that are operational with 
PIP, Split or Main Picture Freeze mode.       SEARCHOPEN/CLOSEpSEARCH
OPEN/CLOSE
pPIPSPLIT2
3
4Search Frames Main PicturePIP MOVEPIPPIP FrameMain PicturePIP PIP MIN PIP MAXPIPMain PictureMAX
MINPIPSPLITREMOTE 
BUTTONSPIP MODESPLIT MODEMAIN 
PICTURE
FREEZE 
MODEPIP MINSize SmallerNo EffectNo EffectPIP MAXSize LargerNo EffectNo EffectFREEZEFreeze PIP 
frameFreeze Split 
FrameDisplay or 
DeletePIP CHChange 
ChannelChange 
ChannnelNo EffectSEARCHDisplays 
Search FrameDisplays 
Search frameNo EffectPIPDisplays PIP 
FrameDisplays PIP 
frameNo EffectSPLITDisplays Split 
FrameDisplays Split 
frameNo EffectMOVEMove PIP 
FrameNo EffectMove PIP 
FrameSWAPSwap with Main 
PictureSwap with 
Main PictureNo EffectFREEZETV/VCRFREEZETV/VCRPIPSPLITMain PictureMain Picture
PIP freeze frame
Note:Audio is from Main Picture only.Split freeze frameFREEZE
TV/VCRFREEZE
TV/VCR 
						

							10 lREMOTE CONTROL OPERATION (MODELS PT-47WXC43 AND PT-47WX33)Remote Control Operation (models PT-47WXC43 and PT-47WX33)                Press to turn ON and OFF.POWERMUTE
 Press to mute sound. Press to display and
cancel CC (Closed Caption).SAP
 Press to access audio modes (Stereo, SAP or 
Mono)TV/VIDEO
 Press to select TV or input modes.Press to select remote operation.  TV VCRDBS/CBL DVDACTIONPress to access menus.Press to select next or previous channel and 
navigate in menus.CH
CHPress to adjust TV sound and navigate in 
menus.VOL  VOLSEARCH
GUIDESEARCH - Press for PIP or SPLIT search.
GUIDE - DBS functions buttonEXITDBS functions button.*PIP MIN
REW*SPLIT
 PLAY*PIP MAX
FF*SWAP
PAUSE*MOVE
STOP*PIP
REC*FREEZE
TV/VCR *PIP CH
VCR /DBS CH*Split and PIP function buttons
Component function buttons
uPress numeric keypad to select any channel.7412580963R-TUNEPress to switch to previously viewed 
channel or input modes.Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up neararrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote ControlPrecautions
•Replace batteries in pairs.
•Do not mix battery types (zinc carbon
with alkaline).
•Do not recharge, heat, short-circuit,
disassemble, or burn batteries.ASPECT
PROGASPECT - Select picture size (ratio) to match 
programming format.
PROG - Press to enter minor number in a 
compound number.RECALLPress to display time, channel, sleep timer, 
and other options.BBE
MENU
 BBE - Press to turn on or off.
MENU- Press to access DBS or DVD menus.EUR7613Z40 
						

							REMOTE CONTROL OPERATION (MODELS PT-47WXC43 AND PT-47WX33)11 lOperating Components with Remote Control
Note:Refer to page 12 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
Operating a CABLE BOX
Program the remote control to use with Cable Box. Operating a DBS
Program the remote control to use with DBS.
Operating a DVD
Program the remote control to use with DVD
 TO DO THIS...PRESSTurn on/offSelect TV Input mode for VCRChange Channels up/downVCR/DBS CHRecordRECPlayPLAYStopSTOPFast ForwardFF Rewind the TapeREWPausePAUSEChange to TV or VCR ModeTV/VCR On screen VCR Display RECALLTO DO THIS...PRESSTurn on/offSelect a ChannelChange Channels Up/DownBack to previous channelR-TUNEPOWERTV/VIDEOuPOWER7412580963CH
CHTO DO THIS...PRESSTurn on/offDisplay DBS menuACTIONMenu NavigationSelect a ChannelProgram InformationRECALLBack to previous channelR-TUNESelect next page up/downVCR/DBS CHExit menusDisplay program GuideGUIDETO DO THIS...PRESSTurn on/offNext/Previous ChapterDVD DisplayRECALLSkip Search ReverseREWSkip Search Fast ForwardFF PlayPLAYDVD Open/CloseTV/VCRStopSTOPStillPAUSESlow +/-VCR CHANNEL POWERVOL  VOLCH
CH7412580963EXITPOWERCH
CH
u 
						

							12 lREMOTE CONTROL OPERATION (MODELS PT-47WXC43 AND PT-47WX33)Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
Note:Determine the manufacturer of the component and look
in the table for the code.
Procedure
•Confirm that the external component is plugged and
operating.
•Turn the component off.
•Press  and  together, for at least 5
seconds.
•Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS.
•Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons).
•Press the Remote Control  to test the
component. If the procedure was successful, the
component will turnon. 
Note:If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
“sequence method.”
•Confirm that the external component is plugged in
and on.
•Turn the component off.
•Press  and  together, for at least 5
seconds.
•Press appropriate component button on the
Remote Control.
•Press VOL uto move forward to the next code.
Press t VOL to move backward.
•Press the Remote Control  to test the
component. If the procedure was successful, the
component will turn on.
Note:Repeat the above steps until the component code is
found. It may take many attempts before the correct
code isfound.
•After the code is found, press  to store the
code.Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.DeviceOperatesDefaultTVTV (Panasonic Only)Panasonic CodeDBS/CBLDBS STB & CBL STB (Preset)Panasonic DBS CodeVCRVCR (Preset)Panasonic Code DVDDVD (Preset) Panasonic CodeACTIONPOWERPOWERACTIONPOWERPOWER
ACTIONWrite the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.     VCR CABLE DVD   DBS   
						

							REMOTE CONTROL OPERATION (MODELS PT-47WXC43 AND PT-47WX33)13 lComponent Codes (cont.)Codes For VCR   BrandCodeAdmiral335Aiwa332Akai314, 315, 316, 329Audio 
Dynamic311, 339Bell & Howell305, 313Broksonic320, 326Canon323, 325CCE343Citizen306Craig305, 306, 329Curtis 
Mathes324, 345Daewoo 301, 324, 343DBX310, 311, 339Dimensia345Emerson303, 319, 320, 325, 
326, 343Fisher305, 307, 308, 309, 
313Funai320, 326, 334GE324, 333, 345Goldstar306Gradiente334Hitachi300, 323, 345Instant 
Replay323, 324Jensen339JVC310, 311, 334,339Kenwood306, 310, 311, 339LXI300, 305, 306,307, 
308, 309Magnavox323, 324, 331Marantz310, 311, 339Marta306Memorex309, 324MGA338, 340, 341, 
347,348Minolta300, 345Mitsubishi338, 340, 341, 347, 
348Multitech304, 347NEC310,311, 334, 339Olympic323, 324Optimus306, 321, 328, 335Orion320, 326Panasonic321,322, 323, 324Penney300,305, 310, 311, 
324, 339, 345 Pentax300,311, 345Codes For VCR (Contd.)BrandCodePhilco320, 323, 324, 326, 
331, 343Philips323, 324, 331Pioneer323Proscan300, 301, 302, 323, 
324, 331, 333, 345, 
346Quasar321, 322, 323, 324Radio Shack305, 309, 324, 333, 
336, 340RCA300, 301,302, 323, 
324, 331, 333, 345, 
346Realistic305, 309, 324, 336, 
340Samsung302, 304, 333Sansui320, 326, 339, 352Sanyo305, 309, 313Scott301, 302, 304, 309, 
320, 326, 338, 340, 
347, 348Sears300, 305, 306, 307, 
308Sharp335, 336Shintom317Signature 
2000335Singer337Sony328, 329, 330Sylvania331, 324, 331Tashiro306Tatung310, 311, 339Teac310, 311, 339Technics321, 322, 323, 324Teknika324Toshiba301, 346Vector 
Research311Wards306, 309, 335, 336, 
344Yamaha305, 310, 311, 339Zenith306,344  Codes For Cable BoxBrandCodeABC224Archer225, 232Cableview205, 232Citizen205, 222Curtis212, 213Diamond224, 225, 
232Eagle229Eastern234GCbrand205, 232Gemini222General
Instrument/
Jerrold211, 219, 
220, 221, 
222, 224, 
225, 226, 
227Hamlin212, 218, 
240, 241, 
242, 245Hitachi203, 224Macom203, 204, 
205Magnavox233Memorex230Movietime205, 232Oak202, 237, 
239Panasonic209, 210, 
214Philips206, 207, 
228, 229, 
230Pioneer201, 216Pulsar205, 232Puser232RCA215Realistic232Regal212, 218, 
240, 241, 
242, 245, 
249Regency234Rembrandt205, 232, 
237Samsung205Scientific Atlanta211, 212, 
213Slmark201, 205Sprucer205, 210Stargate205, 210Teleview201, 205Texscan244Tocom235Toshiba204Unika225, 232Codes For Cable Box (Contd.)BrandCodeUniversal222, 232Videoway206Viewstar229, 230Zenith200, 217Zenith/.Drake 
Satellite200Codes For DBS  BrandCodeDish Network 
(Echostar)105, 115, 116Echostar105Express VU105, 115G. E.106G.I. (General 
Instrument)108Gradiente114Hitachi103, 111, 
112HNS (Hughes)103Magnavox101, 102Panasonic104Philips101, 102Primestar108Proscan106, 109, 110, 
113RCA106, 109, 
110, 113Sony107Star Choice103, 108Toshiba100Uniden101, 102Codes For DVDBrandCodeDenon100Ferguson101JVC109Mitsubishi105Nordmende101Panasonic100Philips103Pioneer102RCA101Saba101Samsung110Sharp108Sony104Technics100Thomson101Toshiba103Yamaha100Zenith107 
						

							14 lREMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 AND PT-Remote Control Operation (models PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 and PT-4743)                   Press to turn ON and OFF.POWERMUTEPress to mute sound. Press to display and
cancel CC (Closed Caption).SAP
 Press to access audio modes (Stereo, SAP 
or Mono).TV/VIDEOPress to select TV or input modes.Press to select remote operation. VCR DVD
   TV
 CBL DBS
 AUX RCVR DTVACTIONPress to access menus.Press to select next or previous channel and 
navigate in menus.CH
CHPress to adjust TV sound and navigate in 
menus.VOL  VOLGUIDE DBS functions button.*PIP MIN
REWPLAY*PIP MAX
FFPAUSESTOPREC*FREEZE
TV/VCR *PIP CH
VCR CH*SEARCH
OPEN/CLOSE*PIP*SPLIT     *MOVE
       *SWAP*Split or PIP function buttons
Component function buttons
uPress numeric keypad to select any channel.7412580963R-TUNEPress to switch to previously viewed 
channel or input modes.Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up neararrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote ControlPrecautions
•Replace batteries in pairs.
•Do not mix battery types (zinc carbon
with alkaline).
•Do not recharge, heat, short-circuit,
disassemble, or burn batteries.PROG  Press to enter minor number in a compound 
number.RECALL    Press to display time, channel, sleep timer, 
and other options.EXITDBS functions button.PAGEDBS page up/down and DVD skip -/+
buttons. LIGHT  Press to illuminate remote buttons.ASPECT  Select picture size (ratio) to match 
programming format. EUR7603Z90
EUR7603Z9ABBE
MENUBBE - Press to turn on or off.
MENU - Press to access DBS or DVD menus. 
						

							REMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 AND PT-15 lOperating Components with Remote Control
Note:Refer to page 17 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
Operating a CABLE BOX
Program the remote control to use with Cable Box. Operating a DBS
Program the remote control to use with DBS.
Operating a DVD
Program the remote control to use with DVD. TO DO THIS...PRESSTurn on/offSelect TV Input mode for VCRChange Channels up/down PIP CH
VCR CHRecordRECPlayPLAYStopSTOPFast ForwardFF Rewind the TapeREWPausePAUSEChange to TV or VCR ModeTV/VCR On screen VCR Display RECALLTO DO THIS...PRESSTurn on/offSelect a ChannelChange Channels Up/DownBack to previous channelR-TUNEExit menusPOWERTV/VIDEOuPOWER7412580963CH
CHEXITTO DO THIS...PRESSTurn on/offDisplay DBS menuMENUDBS ASPECTASPECTMenu NavigationSelect a ChannelProgram InfomationRECALLBack to previous channelR-TUNESelect next page up/downPAGEChannel Up/DownPIP CH 
VCR CHExit menusDisplay program GuideGUIDETO DO THIS...PRESSTurn on/offNext/Previous ChapterDVD DisplayRECALLSkip Search ReverseREWSkip Search Fast ForwardFF PlayPLAYDVD Open/CloseOPEN/CLOSEPOWERVOL  VOLCH
CH7412580963EXITPOWERCH
CH
u 
						

							16 lREMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 AND PT-Operating a DTV Set Top Box
Program the remote control to use with DTV. 
Operating a Cassette Deck
To operate a cassette deck, the remoted control must be in
AUX mode and be programmed with the appropriate code
for your equipment.
Operating a Receiver
Program the remoted to operate audio receiver. Operating a PVR (Personal Video Recorder)
Program the remote control to use with a PVR.    TO DO THIS...PRESSTurn on/offDTV ASPECTASPECTSelect a ChannelNavigation Left / RightBack to previous channelR-TUNEExit menusTO DO THIS...PRESSTurn on/offReceiver Volume Up/DownDeck A/BR-TUNERecordRECPlayPLAYStopSTOPFast ForwardFF Rewind the TapeREWPausePAUSETO DO THIS...PRESSTurn on/offAudio MuteRCVR. VOl Up DownTuner Pre-set stations Up/
DownPOWER7412580963VOL  VOLEXITPOWERVOL  VOLuPOWERMUTEVOL  VOLCH
CHTo select AV Inputs or
Components:Press Remote numeric 
keypadSurround VOL DownPIP MAXSurround VOL UPPIP MAX Center CH VOL Up/DownVCR CHTO DO THIS...PRESSTurn on/offPVR NavigationSelect a ChannelPlayPLAYRecordRECPausePAUSEBack to previous channelR-TUNEExit menusPVR GuideGUIDEReplay ZonesR-TUNEQuick SkipOPEN/CLOSEReturn to livePROG  TO DO THIS...PRESSAV 1Press 1
AV 2Press 2
AV 3Press 3
AV 4Press 4
CDPress 5
TUNERPress 6
PHONOPress 7
TAPEPress 8
AUXPress 9POWERVOL  VOLCH
CH7412580963
uEXIT 
						

							REMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 AND PT-17 lProgramming the Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, AUX, RCVR,
TV, DTV CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.
Note:Determine the manufacturer of the component and look
in the table for the code.
Programming with a Code
Procedure
•Confirm that the external component is plugged in
and operating.
•Turn the component off.
•Press  and  together, for at least 5
seconds.
•Press appropriate component button on the
Remote Control VCR, DVD (CD), AUX (VCR2 or
TAPE), RCVR, DTV, CABLE or DBS.
•Enter the 3-digit component code using the
Remote Control numeric keypad (0 - 9 buttons).
•Press the Remote Control  to test the
component. If the procedure was successful, the
component will turnon.
Note:If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.Programming without a Code
This procedure searches all codes and is called the
“sequence method.”
Procedure
•Confirm that the external component is plugged in
and on.
•Turn the component off.
•Press  and  together, for at least 5
seconds.
•Press appropriate component button on the
Remote Control.
•Press VOLu to move forward to the next code.
PresstVOL to move backward.
•Press the Remote Control  to test the
component. If the procedure was successful, the
component will turn on.
Note:Repeat the above steps until the component code is
found. it may take many attempts before the correct code
is found.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all the features found in each
model. Default Modes for Remote ControlDeviceOperatesDefaultTVTV (Panasonic Only)Panasonic TV CodeDTV-STBDTV (Panasonic Only)Panasonic DTV CodeCABLECABLE (Preset)Panasonic CABLE 
Code DBSDBS (Preset) Panasonic DBS CodeVCRVCR (Preset0Panasonic VCR CodesDVD/CDDVD and CD (Preset)Panasonic DVD CodesAUXPersonal Video Recorders, 
Tape and VCR2Panasonic Personal 
Video Recorder CodeRCVRAudio receiver (Preset)Panasonic RCVR codeACTIONPOWERPOWERWrite the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.     VCR DVD DVD (CD)  AUX (VCR2)  AUX (TAPE)  RECEIVER  CABLE  DBS  ACTIONPOWERPOWER 
						

							18 lREMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-56WX33, PT-53/56TW53 AND PT-Component codes Codes For VCR   BrandCodeAdmiral335Aiwa332Akai314, 315, 316, 329Audio 
Dynamic311, 339Bell & Howell305, 313Broksonic320, 326Canon323, 325CCE343Citizen306Craig305, 306, 329Curtis 
Mathes324, 345Daewoo 301, 324, 343DBX310, 311, 339Dimensia345Emerson303, 319, 320, 325, 
326, 343Fisher305, 307, 308, 309, 
313Funai320, 326, 334GE324, 333, 345Goldstar306Gradiente334Hitachi300, 323, 345Instant 
Replay323, 324Jensen339JVC310, 311, 334, 339Kenwood306, 310, 311, 339LXI300, 305, 306,307, 
308, 309Magnavox323, 324, 331Marantz310, 311, 339Marta306Memorex309, 324MGA338, 340, 341, 
347,348Minolta300, 345Mitsubishi338, 340, 341, 347, 
348Multitech304, 347NEC310,311, 334, 339Olympic323, 324Optimus306, 321, 328, 335Orion320, 326Panasonic321,322, 323, 324Codes For VCR (Contd.)BrandCodePenney300,305, 310, 311, 
324, 339, 345 Pentax300,311, 345Philco320, 323, 324, 326, 
331, 343Philips323, 324, 331Pioneer323Proscan300, 301, 302, 323, 
324, 331, 333, 345, 
346Quasar321, 322, 323, 324Radio Shack305, 309, 324, 333, 
336, 340RCA300, 301,302, 323, 
324, 331, 333, 345, 
346Realistic305, 309, 324, 336, 
340Samsung302, 304, 333Sansui320, 326, 339, 352Sanyo305, 309, 313Scott301, 302, 304, 309, 
320, 326, 338, 340, 
347, 348Sears300, 305, 306, 307, 
308Sharp335, 336Shintom317Signature 
2000335Singer337Sony328, 329, 330Sylvania331, 324, 331Tashiro306Tatung310, 311, 339Teac310, 311, 339Technics321, 322, 323, 324Teknika324Toshiba301, 346Vector 
Research311Wards306, 309, 335, 336, 
344Yamaha305, 310, 311, 339Zenith306,344Codes For Cable BoxBrandCodeABC124Archer125, 132Cableview105, 132Citizen105,122Curtis112, 113Diamond124, 125, 132Eagle129Eastern134GCbrand105, 132Gemini122General
Instrument/
Jerrold111, 119, 120, 
121, 122, 124, 
125, 126,127Hamlin112, 118, 140, 
141, 142, 145Hitachi103, 124Macom103, 104, 105Magnavox133Memorex130Movietime105, 132Oak102, 137, 139Panasonic109, 110, 114Philips106,107, 128, 
129, 130Pioneer101, 116Pulsar105, 132Puser132RCA115Realistic132Regal112, 118, 140, 
141, 142, 145, 
149Regency134Rembrandt105, 132, 137Samsung105Scientific 
Atlanta111, 112, 113Slmark101, 105Sprucer105, 110Stargate105, 110Teleview101, 105Texscan144Tocom135Toshiba104Unika125, 132Universal122, 132Videoway106Viewstar129, 130Zenith100, 117Zenith/.Drake 
Satellite100Codes For DBS  BrandCodeDish Network 
(Echostar)105, 115, 116Echostar105Express VU105, 115G. E.106G.I. (General 
Instrument)108Gradiente114Hitachi103, 111, 
112HNS (Hughes)103Magnavox101, 102Panasonic104Philips101, 102Primestar108Proscan106, 109, 110, 
113RCA106, 109, 
110, 113Sony107Star Choice103, 108Toshiba100Uniden101, 102Codes For DVDBrandCodeDenon100Ferguson101JVC109Mitsubishi105Nordmende101Panasonic100Philips103Pioneer102RCA101Saba101Samsung110Sharp108Sony104Technics100Thomson101Toshiba103Yamaha100Zenith107