Panasonic Sv As3 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Sv As3 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51VQT0P18
≥You can cancel the zoom by opening the menu screen.
≥The more the picture is enlarged, the more the picture quality is
deteriorated.
≥The zoom may not be done on a picture recorded with other
equipment.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
3Select the desired picture and then
press the Jog Ball.
–[¿] appears on the LCD Monitor and the
picture is registered.
Press the Jog Ball again to cancel.
Press the [MENU]...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-50.png "Page 51
51VQT0P18
≥You can cancel the zoom by opening the menu screen.
≥The more the picture is enlarged, the more the picture quality is
deteriorated.
≥The zoom may not be done on a picture recorded with other
equipment.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
3Select the desired picture and then
press the Jog Ball.
–[¿] appears on the LCD Monitor and the
picture is registered.
Press the Jog Ball again to cancel.
Press the [MENU]...")
51VQT0P18 ≥You can cancel the zoom by opening the menu screen. ≥The more the picture is enlarged, the more the picture quality is deteriorated. ≥The zoom may not be done on a picture recorded with other equipment. 1Set the mode to [Picture] mode. (P43) 2Press the [MENU] button and then set the item with the Jog Ball. (P20) 3Select the desired picture and then press the Jog Ball. –[¿] appears on the LCD Monitor and the picture is registered. Press the Jog Ball again to cancel. Press the [MENU]...
Page 52
![Page 52
52VQT0P18
∫When you cancel registration on all files
Select [Unselect all] in Step 2, select [Yes] on the confirmation screen
and then press the Jog Ball. All pictures registered are canceled.
≥Up to 999 pictures can be registered as a “Favorite”.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
If you have created a slide show already, a confirmation message
appears. If you select [Yes], you can delete a slide show previously
created...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-51.png "Page 52
52VQT0P18
∫When you cancel registration on all files
Select [Unselect all] in Step 2, select [Yes] on the confirmation screen
and then press the Jog Ball. All pictures registered are canceled.
≥Up to 999 pictures can be registered as a “Favorite”.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
If you have created a slide show already, a confirmation message
appears. If you select [Yes], you can delete a slide show previously
created...")
52VQT0P18 ∫When you cancel registration on all files Select [Unselect all] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. All pictures registered are canceled. ≥Up to 999 pictures can be registered as a “Favorite”. 1Set the mode to [Picture] mode. (P43) 2Press the [MENU] button and then set the item with the Jog Ball. (P20) If you have created a slide show already, a confirmation message appears. If you select [Yes], you can delete a slide show previously created...
Page 53
![Page 53
53VQT0P18
4Press the [MENU] button.
If no audio file is recorded in the card, a slide
show without audio is created.
5(When there are audio files in the
card)
Select [Yes] or [No] on the
confirmation screen and then press
the Jog Ball.
If you select [No], a slide show without audio is
created.
6(When you select [Yes] in Step 5)
Select the audio file you want to play
during the slide show and then press
the Jog Ball.
A slide show with audio is created.
≥The only files attachable as BGM...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-52.png "Page 53
53VQT0P18
4Press the [MENU] button.
If no audio file is recorded in the card, a slide
show without audio is created.
5(When there are audio files in the
card)
Select [Yes] or [No] on the
confirmation screen and then press
the Jog Ball.
If you select [No], a slide show without audio is
created.
6(When you select [Yes] in Step 5)
Select the audio file you want to play
during the slide show and then press
the Jog Ball.
A slide show with audio is created.
≥The only files attachable as BGM...")
53VQT0P18 4Press the [MENU] button. If no audio file is recorded in the card, a slide show without audio is created. 5(When there are audio files in the card) Select [Yes] or [No] on the confirmation screen and then press the Jog Ball. If you select [No], a slide show without audio is created. 6(When you select [Yes] in Step 5) Select the audio file you want to play during the slide show and then press the Jog Ball. A slide show with audio is created. ≥The only files attachable as BGM...
Page 54
![Page 54
54VQT0P18
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
– A slide show starts.
Press the Jog Ball to stop the playback halfway.
≥You can set the pictures which will be played as a slide show in
SD Viewer. On this unit, pictures cannot be played in the interval set
in SD Viewer.
≥You can adjust the volume with the Volume button on the remote
controller during the slide show (with audio). (The volume control
screen does not appear.)...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-53.png "Page 54
54VQT0P18
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
– A slide show starts.
Press the Jog Ball to stop the playback halfway.
≥You can set the pictures which will be played as a slide show in
SD Viewer. On this unit, pictures cannot be played in the interval set
in SD Viewer.
≥You can adjust the volume with the Volume button on the remote
controller during the slide show (with audio). (The volume control
screen does not appear.)...")
54VQT0P18 1Set the mode to [Picture] mode. (P43) 2Press the [MENU] button and then set the item with the Jog Ball. (P20) – A slide show starts. Press the Jog Ball to stop the playback halfway. ≥You can set the pictures which will be played as a slide show in SD Viewer. On this unit, pictures cannot be played in the interval set in SD Viewer. ≥You can adjust the volume with the Volume button on the remote controller during the slide show (with audio). (The volume control screen does not appear.)...
Page 55
![Page 55
55VQT0P18
≥When you want to listen to the audio being played, connect the
remote controller and the stereo earphones (supplied). (This unit is
not equipped with a speaker.)
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Be sure to set the item above before connecting this unit with the
printer.
3Connect this unit to the power plug with
the AC adaptor.
Be sure to insert the charged battery and the
card into this unit.
Connect this...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-54.png "Page 55
55VQT0P18
≥When you want to listen to the audio being played, connect the
remote controller and the stereo earphones (supplied). (This unit is
not equipped with a speaker.)
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Be sure to set the item above before connecting this unit with the
printer.
3Connect this unit to the power plug with
the AC adaptor.
Be sure to insert the charged battery and the
card into this unit.
Connect this...")
55VQT0P18 ≥When you want to listen to the audio being played, connect the remote controller and the stereo earphones (supplied). (This unit is not equipped with a speaker.) 1Set the mode to [Picture] mode. (P43) 2Press the [MENU] button and then set the item with the Jog Ball. (P20) Be sure to set the item above before connecting this unit with the printer. 3Connect this unit to the power plug with the AC adaptor. Be sure to insert the charged battery and the card into this unit. Connect this...
Page 56
![Page 56
56VQT0P18
4Select a picture and then press the
Jog Ball.
5Check the setting, select [Print start]
and then press the Jog Ball.
– When printing is finished, the message
[PRINTING COMPLETED] appears.
To cancel printing, press the [MENU] button.
∫To change the print setting
When you select [Change settings] in Step 5, you can change 3 items
described in the table below. Select and set the desired item with the
Jog Ball.
The items which are not supported by the printer will not be displayed.
When...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-55.png "Page 56
56VQT0P18
4Select a picture and then press the
Jog Ball.
5Check the setting, select [Print start]
and then press the Jog Ball.
– When printing is finished, the message
[PRINTING COMPLETED] appears.
To cancel printing, press the [MENU] button.
∫To change the print setting
When you select [Change settings] in Step 5, you can change 3 items
described in the table below. Select and set the desired item with the
Jog Ball.
The items which are not supported by the printer will not be displayed.
When...")
56VQT0P18 4Select a picture and then press the Jog Ball. 5Check the setting, select [Print start] and then press the Jog Ball. – When printing is finished, the message [PRINTING COMPLETED] appears. To cancel printing, press the [MENU] button. ∫To change the print setting When you select [Change settings] in Step 5, you can change 3 items described in the table below. Select and set the desired item with the Jog Ball. The items which are not supported by the printer will not be displayed. When...
Page 57
57VQT0P18 ≥Do not use any other USB cables except the supplied one. ≥While printing or canceling the print, do not disconnect the USB cable. ≥Do not replace the card while connecting with the printer. (Ensure that the printer is not printing anything and then disconnect the USB cable before replacing the card.) ≥Pictures recorded on other devices or altered on a PC may not be printed. ≥If you unplug the AC adaptor while connecting with the printer, operations of buttons on this unit will be...
Page 58
![Page 58
58VQT0P18
≥Error messages also appear in the following cases. Check the
message before connecting.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Messages displayedConditions
USE BOTH AC
ADAPTOR AND
BATTERYWhen the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during
connection
SET TO PLAY MODEWhen connecting in the recording mode
NO CARDWhen the card is not inserted
CHECK CARDWhen...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-57.png "Page 58
58VQT0P18
≥Error messages also appear in the following cases. Check the
message before connecting.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Messages displayedConditions
USE BOTH AC
ADAPTOR AND
BATTERYWhen the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during
connection
SET TO PLAY MODEWhen connecting in the recording mode
NO CARDWhen the card is not inserted
CHECK CARDWhen...")
58VQT0P18 ≥Error messages also appear in the following cases. Check the message before connecting. 1Set the mode to [Picture] mode. (P43) 2Press the [MENU] button and then set the item with the Jog Ball. (P20) Messages displayedConditions USE BOTH AC ADAPTOR AND BATTERYWhen the battery is not inserted When the AC adaptor is not connected When the AC adaptor is unplugged during connection SET TO PLAY MODEWhen connecting in the recording mode NO CARDWhen the card is not inserted CHECK CARDWhen...
Page 59
![Page 59
59VQT0P18
3Roll the Jog Ball left or right to select
the desired file.
(Only when [Single print] is selected)
4Roll the Jog Ball up or down to select
the number of prints and then press
the Jog Ball.
The number of prints can be set from 1 to 99.
If you want to set DPOF setting on other
pictures when [Single print] is selected, repeat
Steps 3–4.
5Press the [MENU] button.
– The setting is completed.
∫When you confirm pictures with DPOF setting
Select [Check DPOF] in Step 2 and then press the Jog...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-58.png "Page 59
59VQT0P18
3Roll the Jog Ball left or right to select
the desired file.
(Only when [Single print] is selected)
4Roll the Jog Ball up or down to select
the number of prints and then press
the Jog Ball.
The number of prints can be set from 1 to 99.
If you want to set DPOF setting on other
pictures when [Single print] is selected, repeat
Steps 3–4.
5Press the [MENU] button.
– The setting is completed.
∫When you confirm pictures with DPOF setting
Select [Check DPOF] in Step 2 and then press the Jog...")
59VQT0P18 3Roll the Jog Ball left or right to select the desired file. (Only when [Single print] is selected) 4Roll the Jog Ball up or down to select the number of prints and then press the Jog Ball. The number of prints can be set from 1 to 99. If you want to set DPOF setting on other pictures when [Single print] is selected, repeat Steps 3–4. 5Press the [MENU] button. – The setting is completed. ∫When you confirm pictures with DPOF setting Select [Check DPOF] in Step 2 and then press the Jog...
Page 60
![Page 60
60VQT0P18
∫When you print the date in DPOF printing
Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation
screen and then press the Jog Ball.
Date printing is set to all the pictures that DPOF setting is set. (You
cannot set date printing for each picture.)
You cannot print the date on the pictures if the recording date is not
recorded.
The date may be cut or not be displayed depending on the printer.
∫When you cancel DPOF setting
Set the number of prints to [0] in Step 4.
≥If the...](http://img.usermanuals.tech/thumb/58/66043/w300_sv-as3_en_om_d-59.png "Page 60
60VQT0P18
∫When you print the date in DPOF printing
Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation
screen and then press the Jog Ball.
Date printing is set to all the pictures that DPOF setting is set. (You
cannot set date printing for each picture.)
You cannot print the date on the pictures if the recording date is not
recorded.
The date may be cut or not be displayed depending on the printer.
∫When you cancel DPOF setting
Set the number of prints to [0] in Step 4.
≥If the...")
60VQT0P18 ∫When you print the date in DPOF printing Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation screen and then press the Jog Ball. Date printing is set to all the pictures that DPOF setting is set. (You cannot set date printing for each picture.) You cannot print the date on the pictures if the recording date is not recorded. The date may be cut or not be displayed depending on the printer. ∫When you cancel DPOF setting Set the number of prints to [0] in Step 4. ≥If the...