Panasonic Sv As3 Operating Instructions Manual

21VQT0P18
2Roll the Jog Ball 2 to select the sub-menu, and then 
press the Jog Ball to set.
– The sub-menu screen appears.
3Roll the Jog Ball to select the desired item, and then 
press the Jog Ball to set.
– The setting is changed and the menu screen disappears.
 If you have other items to select, repeat Step 3.
≥To stop the operation, press the [MENU] button.
≥If the Jog Ball is left without any operation for about 30 seconds, the 
unit exits the menu automatically.
≥When you press the [MENU] button...

22VQT0P18
1Press the [MENU] button and then set the desired 
items with the Jog Ball. (P20)
∫Setting the operation sound
∫Setting the Jog Ball
≥The response speed of the Jog Ball is not changed when you select 
pictures and move between thumbnails or list display in the playback 
mode.
Setup Menu
You can change the settings on this unit in the menu.
SetuplSelect the following items for the settings.
Vo l u m el
Beep ONTurns on the operation 
sound.
Beep OFFTurns off the operation 
sound.
Main...

23VQT0P18
∫Setting the USB connection
∫Setting the LCD Monitor
∫Setting the power
≥When this unit is automatically turned off and you want to turn it on 
again, slide the Power Switch to [OFF] and slide it to [ON].
≥[Auto power off] does not work when connecting in USB connection 
mode, recording/playing MPEG4 images, playing the slide show or 
music, or recording/playing the [Voice] files.
Connection
(USB)l
Connection
(PC)Connects to the PC. 
(P73)
PictBridgeConnects to the printer. 
(P55)
Display...

24VQT0P18
∫Setting the clock
∫Formatting (initializing) the card
∫Restoring the settings
1Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
Clock setSets the date and time.
FormatIf the card is formatted, all the data (including 
protected files) cannot be recovered. Check the 
data before formatting.
Reset settingsResets to the initial settings except the clock 
setting.
Setting the Clock
The clock is not set at the time of purchase. Set the clock on the 
clock setting screen which...

25VQT0P18
2Adjust the date and time with the Jog Ball.
 The highlight moves between the items (Month, Day, Year, Hour, 
Minute) every time you press the Jog Ball. When you roll the Jog Ball up 
or down, the value is changed. (You can set the year from 2000 to 2099.)
 The time is displayed in 12 hour system.
3Press the [MENU] button after adjusting the date and 
time.
– The setup screen disappears.
≥When the fully charged battery is inserted in the SD Multi 
Camera for 1 hour or more, the clock setting...

26VQT0P18
1Press the [MENU] button for 1 or more seconds and 
then set the item with the Jog Ball.
 Roll the Jog Ball up/down/left/right to select the item and then press 
the Jog Ball to set the item.
 Press the [MENU] button to exit the shortcut menu.
Shortcut Menu
400400
AUTOAUTO01010OFFOFFAUTOAUTO1001002002002
1
400AUTO02
2016016OFFOFF
1600160012801280
HDTVHDTV
640640
A AWB
234 5
678910
11 13 1412
ALLALL
OFFOFFOFFOFF
SDSD
0
OFFOFFNORMALNORMALS-XBS1-XBS1S-XBS2-XBS2TRAINTRAIN
15 1716
OFFOFF
1 Flash...

27VQT0P18
∫How to hold the SD Multi Camera 
≥Put your arm on the side of your body.
≥Fix the SD Multi Camera with your right hand and 
put your left hand on the SD Multi Camera.
≥The shutter speed can be automatically adjusted. 
The shutter speed becomes slow in dark places 
such as shaded areas or in a room. Therefore, be 
careful not to shake the SD Multi Camera and press 
the shutter button gently. When you take pictures of 
the subjects in quick motion, the picture may be 
blurred or the image of the...

28VQT0P18
∫Selecting the desired recording mode
1Slide the Power Switch to [ON].
– The Power Lamp lights in red.
Slide the Record/Playback Mode 
Switch to the recording mode [ ].
2Press the [MODE] button and then 
select the desired mode with the Jog 
Ball.
 Refer to the table below to select the mode.
Recording
This unit can focus on a subject at a distance of about 2.0 ft. (60 cm) 
or more. 
Picture
EXIT
Recording modeRecommendable situationAudio
Picture
 (Still picture recording)When you want to...

29VQT0P18
∫When selecting [Picture]
1Tap the Shutter button for recording.
 You can also use the Shutter button on the 
remote controller.
 Recorded pictures are displayed for a few 
seconds after capture.
∫
When selecting [MPEG4] or [Voice]
1Tap the Shutter button for recording.
–[¥] appears during recording.
 You can also use the Shutter button on the 
remote controller.
2Press the Shutter button to stop 
recording.
–[∑] appears while recording is stopped.
 If the memory of the card becomes full...

30VQT0P18
≥Do not cover the microphone with your finger or 
other objects during recording. Be careful not to 
touch the Jog Ball or any other buttons. Noises 
may be recorded.
∫When recording in [Picture] mode
≥If you select 
[Advanced setup] >   [Reset file No.] on the 
menu setting, you can reset the file number in recording to a card to 
0001. (The folder number is increased by 1.)
∫When recording in [MPEG4] mode
≥If the remaining recording time becomes less than 1 minute, 
“R 0h00m” is displayed in...