Panasonic Sv As3 Operating Instructions Manual

91VQT0P18
When the Card Access Lamp is blinking (or when the message 
[ACCESSING CARD] appears), do not open the Card/Battery Door 
to remove the card, turn this unit off, or subject it to vibration or 
impact.
Do not leave the card in places where there is high temperature or 
direct sunlight, or where electromagnetic waves or static 
electricity are easily generated. Do not bend, drop, or subject it to 
strong vibration.
≥If the above precautions are not taken, the card or the recorded 
content may be...

92VQT0P18
≥If the SD Memory Card is formatted on other equipment, the time 
spent for recording may become longer or the SD Memory Card may 
not be recognized. (Do not format it by Explorer on the PC.) Format 
the SD Memory Card on this unit or by the application software 
“SD-Jukebox”, in this case. Particularly for the card containing audio 
files, check in the card using SD-Jukebox with which the audio files 
were recorded, then format it. (For details, read the operating 
instructions of...

93VQT0P18
∫Screen Display in Recording
1 Recording mode (P28)
2 Flash mode (P36)
3 Night mode (P40)
4 White balance (P39)
5 Picture quality (P33)
6 Picture size (P33)
7 Battery remaining (P19)
8 Remaining pictures/time
9 Recording/Stop display
10 Digital zoom (P35)
11 Exposure compensation (P41)
12 Counter display
13 ISO sensitivity (P42)
14 Self-timer (P38)
15 Date/time (It is displayed for about 
5 seconds after turning this unit on 
or setting the clock.)
∫Screen Display on the Thumbnail Screen
1...

94VQT0P18
∫Screen Display in Playback
1 Playback mode (P43)
2 Counter display
3 Repeat playback (P47)
4 Picture quality (P33)
5 Picture size (P33)
6 Battery remaining (P19)
7 Folder/File number
8 Stop/Play/Reading display
9 Lock setting (P49)
10 No. of DPOF printing (P58)
11¿ mark setting (P51)
12 Slide show (P54)
13 Recording date/time
≥When pictures for HDTV (16:9) are 
played, black bands appear on the top 
and bottom of the screen.
∫Screen Display in Playing Music
1 Audio player mode (P62)
2 Audio...

95VQT0P18
The confirmation/error message will be displayed on the LCD Monitor.
Messages
MessagesCountermeasures
EMPTY BATTERYThe battery remaining is insufficient. Recharge the 
battery. (P16)
INSERT BATTERYInsert the battery into this unit correctly. (P14, 15)
This message also appears when the battery is 
excessively discharged. Charge the battery.
NO CARDInsert the card correctly. (P14, 15)
CHECK CARDMultiMediaCard is not available.
Re-insert the Memory Card. If [CHECK CARD] is 
still displayed,...

96VQT0P18
MessagesCountermeasures
CANNOT SET FILESelect a still picture recorded by this unit.
SET TO PLAY MODESwitch the Record/Playback Mode Switch to the 
playback mode [ ] when connecting this unit to 
PC or printer. (P55, 73)
USE BOTH 
AC ADAPTOR AND 
BATTERYConnect the AC adaptor when connecting this unit 
to a PC or printer. (P55, 73)
TURN POWER OFF 
AND ONTurn this unit on again.
ERRORAfter turning this unit off, remove and insert the 
battery. If the error persists, consult the dealer.
Trouble...

97VQT0P18
QuestionAnswer
The color or the 
brightness of the 
LCD Monitor 
changes.The color or the brightness of the screen may look 
different under fluorescent light.
The LCD Monitor is 
too bright or dark.Adjust the brightness of the LCD Monitor properly. 
(P23)
Cannot record.Is the card inserted?
You cannot record pictures when the write-protect 
switch on the card is slid toward [LOCK].
Is the memory of the card full? 
Delete unnecessary files before recording. (P47)
It takes time to 
record onto a...

98VQT0P18
QuestionAnswer
The flash cannot be 
activated.Is the flash set to [Flash off]? Check the flash mode. 
(P36)
The pictures 
recorded with a 
flash are dark.Is the flash covered with your finger? Is this unit too 
far away from the subject?
The colors of the 
picture recorded 
with the flash are 
not similar to the 
subject in real life.When you record pictures with the flash, the white 
balance may not be properly adjusted even if the 
white balance is set in [Manual]. When you use the 
flash, we...

99VQT0P18
QuestionAnswer
When connecting 
to a PC, images 
cannot be 
transferred.Is this unit connected to the PC correctly? (P73)
Does the PC recognize this unit properly? (P75)
The pictures cannot 
be printed with 
printers supporting 
PictBridge.Set this unit to the playback mode and then check if 
[Setup]>[Connection (USB)]>[PictBridge] is 
selected in the menu. (P55)
Black belts appear 
on the top and 
bottom of the 
printed pictures.Did you print [Picture] files recorded with the picture 
size set...

100VQT0P18
QuestionAnswer
The clock is not set 
correctly.If you do not use this unit for a long period of time, 
the clock may be reset. When the clock setting 
screen appears, set the clock again.
If you record pictures without the clock setting, the 
date is recorded as [Jan/1/2000 12:00AM].
The retouch 
software does not 
start even if retouch 
files (extension 
“.ped”) are clicked 
on Windows 
Explorer etc.If both the SD Viewer supplied with this unit and 
SD Viewer Ver. 2.1E supplied with SD Multi...