Panasonic Small Digital Business System 308/616 Installation Instructions

Section 400 
Issue 1 July 1990 S-DBS I’rogmmmin g Instruct$oln; 
. 
HOW TO ENTER THE PROGRAM MODE 
Attendant’s Phone: 
-~--Eiisy $Ei2esSe programmin g is performed from an attendant’s telephone as follows: 
l-ON/OFF 
2. PROG 
3. # # 
4. One-touch key (PSD Key) 
An attendant’s telephone is connected to extension ports 1 and 2 (extensions 10 
or 11). 
ON/OFF Key or POWER SETTING: 
,.-. There are three exceptions to programming from the attendant’s telephone. The 
j following addresses can only be...

S-DBS Frogramming Instnxtions 
Section 400 
v1.0 
Issue 1 July 1990 
HOW TO PROGRAM 
Following is an example of how to program using the system’s 
DATE feature: 
a) Using the attendant’s telephone at extensions 10 and 11, 
program the DATE as follows: 
1. 
ON/OFF 
2. PROG 
3. # # 
. 
The system is now in Program Mode. 
b) The date feature is a 
T tern-wide 
program a change of ate. setting, so press the PSD 
1 key to 
PSI) 
1 - System setting 
_.~ ._-.- --- - -- .--?SD.? - Tru_nk setting 
- _._ 
PSI) 3 -...

Section 400 
Issue 1 July 1990 S-DBS Programming Instructions 
v1.0 
DATA TERMINAL PROGRAMMING 
You can also program the system using a data terminal which gives you the ad- 
vantage of checking the 
final changes. programmin 
g steps on the display screen before making 
At every stage in the programmin 
g there are help screens available 
@ the “H” kevonthete-nninalkeyb.oar_d.~ 
---. _ 
ENTERING THIi: DATA *E-AL PROGRAMMING MODE 
Program the access code &om the key telephone fo; Data Terminal Program-...

S-DBS Programming Instructions 
v1.0 Section 400 
Issue 1 July 1990 . .. 
DATA TERMINAL KEYBOARD PROGRAMMING KEYS 
The programmin 
keys on the g keys for the telephone are the equivalent of the following control 
data terminal keyboard. 
KEY TELEPEONE 
- .---.  ._ ._ .__.. - .-.-.- 
HOLD = 
FLASH = 
# = 
* 
= 
AUTO = 
CONF = 
DATA TERMINAL 
CONTROL D (Next port) A 
CONTROL s (Previous port) 
CONTROL x (Next address) 
CONTROL E (Previous address) 
ESCAPE (Program set mode) 
DELETE 
(Clears data) 
VOL A...

Section 400 S-DBS Programmin 
Issue 1 July 1990 g Instructi+3In. 
. 
HOW TO PROGRAM WITH A DATA TERMINAL 
At the REMT> prompt press “H” for help. 
The screen will prompt you to select from the Maintenance Mode menu: 
P = Program Set 
S = Speed,Dial Set 
Control 2 = 33xit 
If you enter ,P” (P plus return) the screen will display the following: 
REMT> P 
DBS System Prog 
Rag> 
At the 
Rag> prompt press “H”. The screen will display the PSI) Key set-s 
menu and the Rag> 
followed by number o F rompt again....

S-DBS Programming Instructions Section 400 
v1.0 Issue 1 July 1990 
SETTINGS 
SYSTEM TRUNK 
Answering Calls (Automatic) 
Busy Override 
COW=%? -.-_- --.._-_..- 
ata Security 
r)elayed Ring 0032 
d 
(01-06) 18.19.2OC 
blal Tone Stop/Internal 
Door Boxes A and B 0039 
hAsI3 Key 0019 
eadset Mode 
Hybrid System/Dual Port Operation 
bIlmde~cxf-Hooksignal 
Faging 
Pooled Trunk Access omS(AlatT-1 
(01-06) 11 c 
b r 
Station Lockout Capability 
Station Lockout Types 
Toil Restriction System I oo4o.0041 
-I...

Section 400 
Issue 1 July 1990 S-DBS Frogramming Instructions 
v1.0 
EXTENSIONS FF KEYS TRS 
I 
(lo-251 12 C 
. 
13  

S-DBS Programming Instructions Section 400 
v1.0 Issue 1 July 1990 
DEFAULT DATA TABLES 
PSD 1 Key - System Setting 
ADDRESS FEAxuRE DEFAULT PAGE 
OOQ5P 
0006-0015 
0016 
0017 
0018 
0019 
0020 
0021 
0022 
0023 
0024 
0025 
0026 
0027 
0028 Date 
Time Dfsplay 
Time 
Days of Week 
Outside Lines 
[Auto) Pause-Digits l-9.0 
(Auto) Pause Timer 
SMDR Timer 
FLASH-RKDIAL &Auto) 
CO FLASH Timer Off-Hook 
SSD CO FLASH Timer 
Dial Pause Timer 
CO Line Guard Timer 
Pulse Dial/Minimum Pause 
Switch Tfme/Night...

___---- --.--.- _-.-_. . _ _ 
Section 400 
Issue 1 July 1990 
S-DBS programming Instructions 
In.0 
DEFAULT DATA TABLES 
PSD 2 Key - Tnmk Setting 
ADDRESS FEATURE DEFAULT PAGE 
(01-06) 01;M 
02 c 
03 c 
04C 
05 c 
06 C 
07 c 
08 C 
09 c 
10 c 
11 c 
12116 
13 c 
14 c 
15 c 
16 C 
17 c 
18 C 
19 c 
20 c Dial Signal/CO Line 
DTMF Signal Sending T5me 
Connected Phone Line 
(Auto) Pause PE3.X Line 
IXMF Signal Conver.fAuto) 
M’MF Conversion (Manual) 
DTMF Signal Time- 
MMF Signal Time Table 
-__ 
CO Line...

S-DBS Programming Instructions 
v1.0 
DEFAULT DATA TABLES 
PSD 3 Key - Extension Setting 
ADDRESS 
(10-25) 01 c 
02 c 
03C 
04C 
05 c 
06 C 
.---- 07 c- 
08 c 
09 c 
10 c 
11 c 
12 c 
13 P c 
14C(See 
below) 
15 c 
16 
17 
FTEATURE 
Day Incoming RFng 
Night Incoming Ring 
Answer (Automatic) 
call waiting 
Paging Groups 
Sensor Alarm Ring 
Door Box Calls 
Call Duration Display 
Busy Override 
Busy Override Rejection 
Data Security 
Voice Announce OfFHook 
ucinuall 
Hybrid System/Dual Port 
Key Telephone...