Panasonic Sirius Satellite Radio Cr Srf100 Operating Instructions

CR-SRF100/CR-SRT10010
6.1. Enter & Exit Setup Mode
ENTERING SETUP MODE
A user enters setup mode by pressing the [1]and [6]buttons simultaneously. The system then displays the
setup mode screen, with viewing the Sirius ID as the first setup item choice.
EXITING FROM SETUP MODE
You may exit setup mode by entering a different mode (press and release [CHANNEL]or [CATEGORY]or 
[PRESET]buttons).
17233_SGould  08/15/02  14:46  Page 10 

CR-SRF100/CR-SRT10011
6.2. Select a Setup Item
When in setup mode, the [SEL]knob is used to navigate to the different setup screens. Pressing and
releasing the [SEL]knob will move to the next setup item.
Where appropriate, rotating the [SEL]knob will move to the next selection within the current setup item.
SEL
PWR
17233_SGould  08/15/02  14:46  Page 11 

CR-SRF100/CR-SRT10012
6.3. View the Sirius ID
The Sirius ID Number is displayed on the CDU when setup mode is entered [SECTION 6.1]. Pressing the
[SEL]button moves to the next setup item. Rotating the [SEL]button has no effect.
17233_SGould  08/15/02  14:46  Page 12 

CR-SRF100/CR-SRT10013
6.4. Change the Display Brightness
ENTER SETUP MODE [SECTION 6.1]
When the Adjust Brightness setup option is selected by pressing the [SEL]button, the brightness of the
character display is changed. You may select between 4 brightness levels (25% [dimmest], 50%, 75%,
100% [brightest]) by rotating the [SEL]knob. Pressing the [SEL]button selects the brightness level 
currently displayed and moves the user to the next setup item. 
SEL
PWR
%
%
17233_SGould  08/15/02  14:46  Page 13 

CR-SRF100/CR-SRT10014
6.5. Setup FM Modulator Frequency
The Sirius receiver has the capability to send audio output to an FM radio by means of a hardware FM 
modulator. This option is enabled through the setup mode, and the FM frequency is set up as well.
Below is a table of the 11 FM Modulator settings available: the “OFF” state and the 10 frequency settings.
The CDU displays the frequency (MHz) or OFF when in this mode.
When the [SEL]knob is rotated, the system increments or decrements the modulator...

CR-SRF100/CR-SRT10015 If you try to use the Sirius Satellite Radio system with an FM modulator and you don’t have the radio tuned
to the correct frequency, you might only hear static. The radio must be on the same FM station as the SSR
system is set.
For convenience, we recommend you assign the appropriate FM modulator frequency to one of the 
preset buttons on your FM radio.
Index Frequency
0 OFF
1 88.7 MHz
2 88.9 MHz
3 89.1 MHz
4 89.3 MHz
5 89.5 MHz
6 89.7 MHz
7 89.9 MHz
8 90.1 MHz
9 90.3 MHz
10 90.5...

CR-SRF100/CR-SRT10016
7. Basic Operation
“Power up” means turning the unit on from a Control Display Unit (CDU) on a system that has
• been properly installed and battery power supplied.
• already engaged a channel subscription from Sirius.
7.1. General Descriptions
CATEGORY
A category is a group of channels having a similar theme or “genre” (for example “ROCK” or “JAZZ”).
There are “at least” 12 categories … each having a maximum of 24 channels.
CHANNEL
A channel can be thought of as a single radio...

CR-SRF100/CR-SRT10017
PRESET
A preset is a channel number stored in memory that is easily called back by pressing a button.   The CDU
can store up to 18 preset channels for quick retrieval. There are 6 buttons to store/recall preset channels
(numbered 1 ‡ 6). To afford 18 preset channel numbers, the CDU uses 3 groups of 6 presets. To access a
particular preset, you only have to select the group of preset values you want and then press the particular
preset button.
The preset memory (18 channels) is saved...

CR-SRF100/CR-SRT10018
7.1.1. CDU Controls
• Select knob/push button
• “Channel” Mode button
• “Category” Mode button
• “Preset” Mode button
• Preset buttons (“1”,  “2”,  “3”,  “4”, “5”,  “6”,)
7.1.2. CDU Communication to the Operator
• Display
• Indicators
17233_SGould  08/15/02  14:46  Page 18 

CR-SRF100/CR-SRT10019
7.2. Start-Up/Shut-Down Modes
In this section, “On” refers to a condition where the CDU is displaying information and the radio is playing
audio.  “Off” refers to the condition when the CDU is powered down and there is no satellite receiver audio.
The receiver remains powered as long as there is battery power.   Power is supplied to the CDU by pressing
the [SEL]button.
7.2.1. Start-Up (Turn On)
If the SSR system was “On” when the vehicle was last powered off, then it will...