Panasonic SD Stereo System Sc Pm71 Operating Instructions

RQT8046
11
Fix the other end of the 
antenna where recep-
tion is best. Adhesive tape
AC power supply cord
To household AC outlet 
(AC 120V, 60 Hz)
FM indoor antenna
Connect the AC power supply cord 
after all other connections are 
complete.
Speakers
Note•You can reduce the power consumed in standby mode by 
turning the demo function off.
•If you set the clock (⇒ page 32), the demo function will 
turn off automatically.Grey
Blue
Black
Red White
Blue
Black
Red
When disconnecting the AC power 
supply...

RQT8046
12Control guide
The following screen is for explanation purposes.
Main unit
Display
Cassette lid
 (⇒ page 19) OPEN ; (⇒ page 19)
Press to open the 
cassette lid.PHONES (Headphone jack)
Reduce the volume level and connect the headphones.
Headphones plug type: 3.5mm (1/8”) stereo.
Avoid listening for prolonged periods of time to prevent 
hearing damage. POWER 8 (standby/on switch)
Press to switch the unit from on to 
standby mode or vice versa.
In standby mode, the unit is still 
consuming a small...

RQT8046
13
Remote control
CLOCK/ (⇒ page 32)
TIMER (⇒ page 33)
z PLAY/REC (⇒ page 33)
DISPLAY (⇒ page 15, 33)
–DIMMER (⇒ page 33)
Numbered buttons (⇒ page 16)
u 2/REW, i 1/FF 
(⇒ page 15)
TUNER/AUX (⇒ page 22, 35)
RETURN (⇒ page 16)
SURROUND (⇒ page 21)
SOUND (⇒ page 21)
REC MODE (⇒ page 24)
TA P E  (⇒ page 25)
To record to cassette tapes PLAY MODE (⇒ page 15)
–REPEAT (⇒ page 17)
e, r
LIST/ENTER (⇒ page 16)
VOL –,  + (⇒ page 15) SLEEP (⇒ page 32)
–AUTO OFF (⇒ page 32)
^ (⇒ page 33)
PROGRAM (⇒ page 17)...

RQT8046
14Basic play
1Select a disc tray.
•The unit turns on automatically.
•When a CD is already loaded, the unit comes on automatically and starts play (One 
touch play).
2Open the CD lid.
3Insert disc. (⇒ page 8)
4Close the CD lid.
5Start play.
•It may take some time for play to start but this is normal.
Playing discs
1
Label must face 
upward.
Tray number
Disc tray
q/h SD
q/h CD
VOLUME UP/DOWN
CD CHECK
1 q – 5 q
CD lid STOP g
LIST SELECT e, r
OPEN/CLOSE ;
CHANGE ;
Playing back 

RQT8046
15
This unit can only play music data (AAC/MP3/WMA) recorded in the SD 
standard audio format. Other SD audio formats cannot be played.
1Insert the SD card. (⇒ page 8)
2Start play.
•When a SD card is already loaded, the unit comes on automatically and 
starts play (One touch play).
Note•Do not open the card lid during play as play stops.
•You can use SD cards with capacities between 8MB and 1GB on this 
unit (⇒ page 6)
•Playback quality depends on the recording mode (XP/SP/LP) selected. 
(⇒ page...

RQT8046
16
Basic play
Preparation
Press [q/h CD] or [q/h SD] and then [g STOP].
Press the numbered button(s) to select and play the 
track.
Example
To select 12: [ 10] è [1] è [2]
To select 123: [ 10] è [10] è [1] è [2] è [3]
NoteYou cannot use this feature with program play and random play modes.
1During stop
Press [PLAY MODE, –REPEAT] to select “1 ALBUM”.
2Press [ ,   ALBUM/GROUP] to select the album.
3Press [q/h CD].
To skip an album
Press [ ,   ALBUM/GROUP].
1During stop
Press [LIST/ENTER].
2Press...

RQT8046
17
1During stop
Press [PROGRAM].
2CD/WMA/MP3 only
Select a disc.1 Press [DISC].
2 Within 10 seconds:
Press [1] - [5] to select the disc.
3Press the numbered button(s) to select the track.
•Example
To select 12: [ 10] è [1] è [2]
To select 123: [ 10] è [10] è [1] è [2] è [3]
•Repeat steps 2 and 3 to program other tracks.
4Press [q/h CD] or [q/h SD].
Program play will start.
When “PGM FULL” appears
No further tracks can be programmed.
Note•Times are not displayed while programming (CD/WMA/MP3)....

RQT8046
18
Basic play
“HighMAT” appears to show that you can use these features.
Remote control
1During stop
Press [LIST/ENTER].
The CD selection screen appears.
2Press [e] or [r] to select the disc and press [LIST/ENTER].
3Press [e] or [r] to select the method of play and press 
[LIST/ENTER].
4Press [e] or [r] to select the menu, playlist, or track and press 
[LIST/ENTER].
Play starts when you select a playlist or track.
Main unit
1 Press [LIST/ENTER].
2 Turn [LIST SELECT e, r] control to select the...

RQT8046
19 Cassette tapes
TPS may not operate correctly in the following situations:
•If the interval between tracks is less than 4 seconds.
•If there is noise between tracks.
•If there are silent parts within tracks.
1Press to open and insert a cassette.
•Make sure that the cassette is fully inserted and close the cassette 
lid by hand.
•The cassette tape indicator lights on the display.
2Start play.
•To play the other side of the tape, turn the tape over and restart 
play.
Vo l u m e  
adjustment
Stop...

RQT8046
20Sound field and sound quality
You can enjoy more powerful bass on wide range speakers.
Press [H.BASS].Every time you press the button:
H.BASS 1: Add powerful bass (factory preset)
H.BASS 2: Further increases the power of the bass
•The H.BASS indicator lights on.
Note•You cannot change H.BASS during recording.
•The effect may be less discernible with some sound sources.
Discs recorded at 32 kHz, 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you 
a sound...