Panasonic SD Stereo System Sc Pm71 Operating Instructions

RQT8046
21
You can add natural width and depth to the stereo sound.
Press [SURROUND].
•This does not work or has less effect with some discs.
•Turn off if it causes distortion.
•Do not use in combination with surround effects on other equipment.
•You cannot change SURROUND during recording.
nOptimum seating position
Press [SOUND].Every time you press the button:
HEAVY : Adds punch to rock (factory preset)
CLEAR : Clarifies higher sounds
SOFT : For background music
VOCAL : Adds gloss to vocal
FLAT : EQ...

RQT8046
22The radio
Preset channels to make selection simpler. Up to 15 stations can each be preset in the FM and AM bands.
1Tune to the frequency where presetting is to begin. 
(⇒ see above)
2Press and hold.
•“AUTO MEMORY” star ts flashing.
•The tuner presets the stations it can receive into the channels in 
ascending order. When finished, “SET OK” appears and the last 
station to be preset is played.
1Tune to the desired station. (⇒ see above)
2Press.
“PGM” appears.
3Within 10 seconds:
Select the...

RQT8046
23 Recording sources and media
*Please read “High-speed recording” below.
NoteYou can only make digital recordings from CD to SD.
You can use SD cards with capacities between 8MB and 1GB on this unit. 
(⇒ page 6)
* Usable capacity will be less.
•The maximum number of tracks recordable in a SD card: 998
•Recording mode:
XP: High quality mode
SP: Normal mode
LP: Long play modeYou can record at up to four times normal speed from a CD to a SD and 
up to two times normal speed from a CD-RW to a SD....

RQT8046
24Recording CDs
To  s t o p
Press [g STOP].
To display the remaining time on the SD
Press [DISPLAY, –DIMMER] several times.
The remaining time depends on the selected recording mode (XP/SP/LP).
Note•WMA/MP3 files are automatically recorded in analog.
•This unit records CDs to SD in AAC format.
•Do not open the lid while recording. This may cause recording to stop or 
the data may not be correctly recorded onto the SD card.
If you accidentally open the cover when recording from a CD, reinsert 
the...

RQT8046
25
(High-speed recording only)
This function high-speed records all loaded CDs in succession from the 
first tray onto a SD card with one-touch. 
•All tracks on one CD are recorded as one playlist.
•All titles on the CDs (⇒ page 31) are copied to the SD. 
1Insert the CD and select the recording mode. 
(perform steps 1 to 3 on page 24.)
2Select “CD” as the source.
3Start recording.
•Recording starts after the information from all the discs has been read.
Note•Program and random modes are...

RQT8046
26Recording from cassette tape/the radio to SD
Preparation
1 Insert the SD card. (⇒ page 8)
•Securely close the lid of the SD card slot. You cannot record if the lid 
is open.
2 Press [REC MODE] to select the recording mode.
(Normal recording only)
1Insert the cassette tape. (⇒ page 19)
2Select “TAPE” as the source.
3Select the recording method.
Every time you press the button:
MANUAL: Normal recording
TIME MARK: Track marks are inserted automatically every five 
minutes.
4
•When recording from...

RQT8046
27 Recording from SD/the radio to cassette tape
 
NoteYou can use SD cards with capacities between 8MB and 1GB on this unit. 
(⇒ page 6)Preparation
Insert the SD card (⇒ page 8) or the cassette tape. (⇒ page 19)
(Normal recording only)
1Select “SD” as the source.
2
(Normal recording only)
1Tune to the station (⇒ page 22).
2
(Normal recording only)
Program record allows you to specify the tracks to be recorded to tape.
1Select “SD” as the source.
2Program the desired tracks. (⇒ page 17, Program...

RQT8046
28Editing SDs
Preparation
1 Insert the SD card. (⇒ page 8)
•Securely close the lid of the SD card slot. You cannot edit if the lid is 
open.
2 Press [q/h SD] and then [g STOP] to select “SD” as the source.
To stop partway 
Press [g STOP].
Note•Do not open the SD card lid while editing as the operation in progress 
stops and the editing is not completed properly.
If you accidentally open the cover when editing an SD card, reinsert the 
card and check what you have edited. If there is a problem,...

RQT8046
29
Formatting erases all the contents of the card and not only the tracks 
recorded using this unit. Once erased, the contents of the card are lost 
and cannot be restored. Make certain before proceeding.
•When a card is formatted using this unit, it may not be possible to use it 
on other equipment.
1During stop
Select “CARD FORMAT?”.
Every time you press the button:
2Press [LIST/ENTER].
3Press [LIST/ENTER].
•When “CARD Writing” stops flashing editing is complete.
•Do not open the card lid until...

RQT8046
30Entering titles
You can enter titles for discs, tracks, artists and playlists. 
NoteThe maximum number of characters per title: 32Preparation
Show Enter Name screen. (⇒ page 31)
1Press [CHARA] to select upper-case, lower-case, 
or numeric characters.
2Press the numbered button to select the character.
The characters change each time you press a button.
 : For SD only
3Press [  ALBUM/GROUP] to enter the character.
Repeat steps 1 through 3 to enter the title.
To move the cursor
Press [ ,...