Panasonic Sc Htb770 Owners Manual

Operations
RQT977831
3D sound
This system provides a feeling that the sound and the 
image are as one.
≥To change the applied effect, refer to “Sound modes”. 
(>right)
	≥To turn off Dolby Virtual Speaker and the 3D surround 
effects, select “STEREO” as the sound mode. (>right)
≥To turn off the 3D surround and the Clear-mode dialog 
effects, refer to “Using the Dolby Virtual Speaker effect”. 
(>34)
By changing the sound mode, it is possible to enjoy the 
sound that is suitable to the TV program or image...

32RQT9778
Linked operations with the TV
(VIERA Link
TM “HDAVI ControlTM”)
Preparation1Confirm that the HDMI connection has been made. 
(>26, 27)
2Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3For the optimal “HDAVI Control” operations change 
the following settings on the connected TV
§1.
≥Set the default speaker settings to this system.§2
≥Set the speaker selection settings to this system.
4Turn on all “HDAVI Control” compatible equipment 
and select the TV’s input for this...

Operations
RQT977833
Advanced operations
To display the current audio format.
Press and hold [SOUND] for more than 
4 sec.
≥The current audio format is indicated for 5 sec.
	Audio format is not indicated when “” is selected as the 
source.
Change the dual audio from main to secondary.
≥This setting will only work if the audio output setting on 
the connected TV or player, etc. is set to Bitstream 
and dual audio is available in the audio source.
Press and hold [MUTE] for more than 
4 sec.
While the...

34RQT9778
You can select different modes to suit the type of 
connections with emphasis on connectivity or high quality 
audio. 
≥Make sure that a Bluetooth
® device is already paired 
with this system. (>29)
Press [ ] to select “ ”.
≥“” indicator will blink slowly. If the indicator lights, a 
Bluetooth® device is already connected with this system. 
Disconnect it. (>29)
Press [ ] to display the current 
mode.
While the mode is displayed, press 
[ ] to select the mode.
≥The setting changes each time [ ]...

Operations
RQT977835
∫Remote control code
When other Panasonic devices respond to this system’s 
remote control, change the remote control code on this 
system and the remote control.
Preparation≥Turn off all other Panasonic products.
≥Turn on the main unit.
Change the remote control code to code 2:
1 Aim the remote control at the main unit’s 
remote control sensor.
2 Press and hold [MUTE] and [ ] on the remote 
control for more than 4 sec.
≥All the indicators will blink for 10 sec when the code of 
this...

36RQT9778
3FGFSFODFTroubleshooting
Before requesting service, make the following checks. If 
you are in doubt about some of the check points, or if the 
solutions indicated in the following guide do not solve the 
problem, refer to “Customer Services Directory (United 
States and Puerto Rico)” on page 42 if you reside in the 
U.S.A. or Puerto Rico, or refer to “WARRANTY SERVICE” 
on page 43 if you reside in Canada.
No power.≥Insert the AC power supply cord securely. (>28)
≥After turning the main unit on,...

Reference
RQT977837
The sound is interrupted.≥The device is out of the 10 m (33 ft) communication 
range. Bring the Bluetooth® device closer to the main 
unit.
≥Remove any obstacle between the main unit and the 
device.
≥Other devices that use the 2.4 GHz frequency band 
(wireless router, microwaves, cordless phones, etc.) are 
interfering. Bring the Bluetooth
® device closer to the 
main unit and distance it from the other devices.
≥Select “MODE1” for stable communication. (>34)
No sound (or...

38RQT9778
Specifications
AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
60 W per channel (6≠),1kHz,10%THD
Center ch (C ch)
60 W per channel (6≠),1kHz,10%THD
Subwoofer ch
120 W per channel (8≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
 300 W
FTC output power: Dolby Digital Mode
Front ch (L, R ch)
25 W per channel (6≠),
120 Hz to 20 kHz, 1.0 % THD
Center ch (C ch)
25 W per channel (6≠),
120 Hz to 20 kHz, 1.0 % THD
Subwoofer ch
40 W per channel (8≠),
60 Hz to 120 Hz,...

Reference
RQT977839
	1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum 
analyzer.
GENERAL
Power consumptionMain unit: 37 W
Active subwoofer: 20 W
In standby condition
Main unit (When the other connected devices 
are turned off):  Approx. 0.25 W
Active subwoofer 
(Power switch release):  Approx. 0.2 W
Power supplyAC 120 V, 60 Hz
Dimensions (WkHkD)
Main unit
310 mmk45 mmk188 mm
(12...

40RQT9778
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below 
are displayed during normal operational conditions. They do not refer to the indications of a problem.
§1  The indicator for the current status remains lit.
§2  The BD/DVD indicator stops blinking and lights once the wireless pairing is successful.
§3  The indicator blinks only when [SOUND] is pressed for more than 4 sec and the audio format is PCM. Indicator...