Panasonic Sc Htb770 Owners Manual

Getting started
RQT977821
≥For a safety measure to prevent the speakers from falling, refer to page 24.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the center speaker:
Attach the side caps and speaker feet to the speaker and connect the 
speaker cable.
≥There is no left and right for the center speaker.
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
≥Keep the screws and the speaker feet out of reach of children to prevent...

22RQT9778
Assemble the front speakers:
Attach the stand neck.
≥The two front speakers are interchangeable.
≥Keep the screws out of reach of children to prevent swallowing.
Assemble the front speakers:
Insert the speaker cable through the speaker base and connect the 
speaker cables.
≥Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the 
cable about 20 mm...

Getting started
RQT977823
Assemble the front speakers:
Attach the speaker base.
≥The two front speakers are interchangeable.
≥Keep the screws out of reach of children to prevent swallowing.
Red connector:The speaker attached to the red connector cable is to be placed on the right side.
White connector:The speaker attached to the white connector cable is to be placed on the left side.
Align the projecting 
parts with the holes 
on the speaker.
Press into the groove.Screw (supplied)
≥Tighten securely....

24RQT9778
To prevent the speakers from falling, it is recommended, as an additional 
protection measure, to attach the speakers to the wall or table with a fall 
prevention cord (hereafter “cord”).
	≥Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a 
surface that may not have strong enough support is recommended (>13, 17). Improper attachment may result in damage to 
the wall and speakers, and personal injury.
≥Use a cord...

Getting started
RQT977825
When attaching the speakers vertically
ACord§1, 2
BScrew eyeCWall
DApprox. 150 mm (529/32q)
§1 If the cord cannot be threaded through the holes, try bending the cord in 2 locations, 
about 10 mm (
13/32q) apart from the tip, at an angle of 45o (as illustrated above).
§2 When attaching the cord to the center speaker, make sure that the cord does not touch the speaker 
cable lead wire.


 

 


Wall mounting






On a table
SC-HTB770PPC_RQT9778-1P_mst.book  Page...

26RQT9778
Step 3  Connections
≥Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC power supply cord until all other connections are completed.
∫HDMI
≥The HDMI connection supports VIERA Link “HDAVI Control” (>32) when used with a compatible Panasonic TV.
≥Use the ARC compatible High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
≥It is recommended that you use Panasonic’s HDMI cable.
Verify if the TV’s HDMI terminal is labeled...

Getting started
RQT977827
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to 
this system.
Preparation≥Connect the main unit to the TV (>26).
∫HDMI standby pass-through
Even if the main unit is in standby mode, the audio and/or video signal from the device connected to the BD/DVD, AUX1 or AUX2 
terminal will be sent to the TV connected to the HDMI OUT terminal (the sound will not be output from this system). When 
devices are connected to all BD/DVD,...

28RQT9778
Match the connector shape and connect to the terminals of the same color.
≥Connect only after all other connections are completed.
≥This system consumes a small amount of AC power (>39) even when it is turned off. In the interest of 
power conservation, if you will not be using this system for a long time, unplug it from the household 
AC outlet.
Speaker cable connection
ARED
Right speaker connectorBGREEN
Center speaker connectorCWHITE
Left speaker connector
AC power supply cord connection
DTo...

Getting started
RQT977829
Preparation≥Turn on the main unit.
Press [BÍ CI].
Active subwoofer on/off button [B Í C I]
Use this button to turn the active subwoofer on and 
off.
C I:
The active subwoofer is on.
B Í:
The active subwoofer is off.
The active subwoofer will still consume a small 
amount of power even when it is turned off (B, Í).
Check that the wireless link is 
activated.
WIRELESS LINK indicator
Lights red:
The wireless link is not activated.
Lights green:
The wireless link is activated....

30RQT9778
0QFSBUJPOTUsing this system
Preparation≥Turn on the active subwoofer.
≥Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥This remote control cannot be used to control the operations 
of the connected devices.
∫When “ ” is selected as the source
On the Bluetooth® device:Select this system as the output source of the connected 
Bluetooth® device and start the playback.
∫When “BD/DVD”, “AUX1” or “AUX2” is 
selected as the source
On the TV and the...