Panasonic Sc Htb770 Owners Manual

							Operations
RQT977831
3D sound
This system provides a feeling that the sound and the 
image are as one.
≥To change the applied effect, refer to “Sound modes”. 
(>right)
	≥To turn off Dolby Virtual Speaker and the 3D surround 
effects, select “STEREO” as the sound mode. (>right)
≥To turn off the 3D surround and the Clear-mode dialog 
effects, refer to “Using the Dolby Virtual Speaker effect”. 
(>34)
By changing the sound mode, it is possible to enjoy the 
sound that is suitable to the TV program or image from the 
connected device.
∫To select the sound mode
Press [SOUND].
“STANDARD” -----#“STADIUM” -----#“MUSIC”
^- “STEREO”( “NEWS”( “CINEMA”(}
≥The indicator for the selected sound mode lights.
e.g., “STANDARD”
	The setting is maintained until it is changed again.
3D sound
Dolby
® Virtual 
SpeakerWith this effect you can enjoy a 
surround sound effect similar to 
5.1ch.
3D surround 
effect
Adding to the Dolby Virtual 
Speaker effect, Panasonic has 
applied its own sound field 
controlling technology to expand 
the sound field forwards, 
backwards, upwards, and 
downwards, providing a sound 
with depth and force that better 
matches 3D images.
Clear-mode 
dialog
Sports commentary and dialogs 
from TV dramas are heard as if the 
sound is coming from the TV, 
giving the feeling that the sound 
and the image are one.
Also, the dialog will stand out from 
the other sounds during normal 
volume playback and when the 
volume is lowered for night time 
viewing.
e.g., Image of 3D sound field
Sound modes
Sound mode
“STANDARD”
(Factory preset)Produces a sound best suited for 
dramas and comedy shows.
“STADIUM”Produces a highly realistic sound 
for live broadcasts of sports.
“MUSIC”Re-creates the sound of musical 
instruments and songs with an 
expansive sound.
“CINEMA”Produces a powerful, three-
dimensional sound unique to 
movies.
“NEWS”Enhances the voices of news and 
sports commentaries for clearer 
hearing.
“STEREO”You can play any source in stereo. 
Dolby Virtual Speaker and 3D 
surround effects are turned off.
SC-HTB770PPC_RQT9778-1P_mst.book  Page 31  Tuesday, January 29, 2013  11:33 AM 
						

							32RQT9778
Linked operations with the TV
(VIERA Link
TM “HDAVI ControlTM”)
Preparation1Confirm that the HDMI connection has been made. 
(>26, 27)
2Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3For the optimal “HDAVI Control” operations change 
the following settings on the connected TV
§1.
≥Set the default speaker settings to this system.§2
≥Set the speaker selection settings to this system.
4Turn on all “HDAVI Control” compatible equipment 
and select the TV’s input for this system so that the 
“HDAVI Control” function works properly.
5If a device is connected to the HDMI IN terminal, start 
play to check that the picture is displayed on the TV 
correctly.
When the connection or settings are changed, 
repeat this procedure.
§1 The availability and function of the settings may vary 
depending on the TV. Refer to the operating instructions 
for the TV for details.
§2 If the TV has a default speaker setting within the VIERA 
Link setting items, choosing this system as the default 
speaker will automatically change the speaker selection to 
this system.
	≥VIERA Link “HDAVI Control”, based on the control functions 
provided by HDMI which is an industry standard known as 
HDMI CEC (Consumer Electronics Control), is a unique 
function that we have developed and added. As such, its 
operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the standard for Panasonic’s HDAVI 
Control compatible equipment. This standard is compatible 
with Panasonic’s conventional HDAVI equipment.
≥Please refer to individual manuals for other manufacturers’ 
equipment supporting VIERA Link function.
To make sure that the audio is output from this system, 
turn the main unit on by using the TV’s remote control and 
selecting home theater from the speaker menu of VIERA 
Link menu. The availability and function of the settings 
may vary depending on the TV. Refer to the operating 
instructions for the TV for details.
∫Speaker control
You can select whether audio output is from this system or 
the TV speakers by using the TV menu settings.
Home theaterThis system is active.≥When the main unit is in standby mode, changing the TV 
speakers to this system in the VIERA Link menu will 
automatically turn the main unit on.
≥You can control the volume setting of this system using the 
volume or mute button on the TV remote control.
≥If you turn off the main unit, the TV speakers will be 
automatically activated.
≥Audio will automatically be output from this system if the TV 
is compatible to VIERA Link “HDAVI Control 4” or later.
TVTV speakers are active.≥The volume of this system is set to its minimum.
∫Automatic input switching
When the following operations are performed, the main 
unit will automatically change the input to the 
corresponding source.
jWhen play starts on an HDMI connected device.§3jWhen the TV input or the TV channel is changed.
§3 If the speaker output setting on the TV is set to this 
system, the TV and the main unit turn on automatically 
(Power on link).
∫Power off link
When the TV is turned off, the main unit also turns off 
automatically. (This function does not work when 
Bluetooth
® is the source.)
∫Automatic lip-sync function 
(for HDAVI Control 3 or later)
Delay between audio and video is automatically adjusted 
by adding time-lag to the audio output, enabling you to 
enjoy smooth audio for the picture.
	The delay information is automatically set if the TV is 
compatible to VIERA Link “HDAVI Control 3” or later and the 
VIERA Link is set to on.
What is VIERA Link “HDAVI 
Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient 
function that offers linked operations of this 
system, and a Panasonic TV (VIERA) under 
“HDAVI Control”.
You can use this function by connecting the 
equipment with an HDMI cable. See the 
operating instructions for connected 
equipment for operational details.
What you can do with 
VIERA Link “HDAVI 
Control”
SC-HTB770PPC_RQT9778-1P_mst.book  Page 32  Tuesday, January 29, 2013  11:33 AM 
						

							Operations
RQT977833
Advanced operations
To display the current audio format.
Press and hold [SOUND] for more than 
4 sec.
≥The current audio format is indicated for 5 sec.
	Audio format is not indicated when “” is selected as the 
source.
Change the dual audio from main to secondary.
≥This setting will only work if the audio output setting on 
the connected TV or player, etc. is set to Bitstream 
and dual audio is available in the audio source.
Press and hold [MUTE] for more than 
4 sec.
While the setting is displayed, press 
[MUTE] to change the setting.
≥The setting changes each time [MUTE] is pressed.
≥The indicator for the selected setting blinks for 20 sec and 
then exits the setting mode.
≥The setting is maintained until it is changed again.
With this function, you can prevent sudden loud sounds. 
The output will be reduced automatically when the input 
exceeds a certain level. 
Press and hold [INPUT SELECTOR] 
on the remote control for more than 
4 sec.
While the setting is displayed, press 
[INPUT SELECTOR] on the remote 
control to change the setting.
≥The setting changes each time [INPUT SELECTOR] is 
pressed.
≥The indicator for the selected setting blinks for 20 sec and 
then exits the setting mode.
≥The setting is maintained until it is changed again.
Audio format indicator
“STADIUM” indicator blinks:
Dolby Digital is the audio format.
“MUSIC” indicator blinks:
DTS is the audio format.
“CINEMA” indicator blinks:
PCM is the audio format.
Changing the dual audio
“STANDARD” indicator blinks (A):
Main (Factory preset)
“STEREO” indicator blinks (B):
Secondary
(SAP: Secondary Audio Program)
When A and B both blink: Main and secondary
Auto gain control
“STANDARD” indicator blinks:
Auto gain control is on.
“STEREO” indicator blinks:
Auto gain control is off.
(Factory preset)
SC-HTB770PPC_RQT9778-1P_mst.book  Page 33  Tuesday, January 29, 2013  11:33 AM 
						

							34RQT9778
You can select different modes to suit the type of 
connections with emphasis on connectivity or high quality 
audio. 
≥Make sure that a Bluetooth
® device is already paired 
with this system. (>29)
Press [ ] to select “ ”.
≥“” indicator will blink slowly. If the indicator lights, a 
Bluetooth® device is already connected with this system. 
Disconnect it. (>29)
Press [ ] to display the current 
mode.
While the mode is displayed, press 
[ ] to select the mode.
≥The setting changes each time [ ] is pressed.
≥The indicator for the selected setting blinks for 10 sec and 
then exits the setting mode.
≥The setting is maintained until it is changed again.
Depending on your preference, It is possible to turn off the 
3D surround effect and the clear-mode dialog effect.
While pressing and holding [SOUND] 
on the remote control, press and 
hold [VOLi] on the main unit for 
more than 4 sec.
While the setting is displayed, press 
[SOUND] to change the setting.
≥The setting changes each time [SOUND] is pressed.
≥The indicator for the selected setting blinks for 20 sec and 
then exits the setting mode.
≥This setting will be reset to on when the main unit is turned 
off.
≥When off is selected, the dialog effect level cannot be 
adjusted.
You can turn off dimmer mode and keep the LED 
indicators bright.
While pressing and holding [INPUT 
SELECTOR] on the remote control, press 
and hold [sVOL] on the main unit for 
more than 4 sec to turn off Dimmer mode.
≥The indicator for the current condition will turn brighter.
≥The setting is maintained until it is changed again.
≥Default setting of this function is on.
	To turn on dimmer mode, repeat the operation above.
After performing the operation, the indicator for the current 
condition will be dim.
Bluetooth® communication 
mode
“STANDARD” indicator blinks:
MODE1 (Factory preset)
Emphasis on connectivity
“STEREO” indicator blinks:
MODE2
Emphasis on audio quality
Using the Dolby Virtual 
Speaker effect
“STANDARD” indicator blinks:
3D surround effect and clear-mode 
dialog effect is on.
“STEREO” indicator blinks:
3D surround effect and clear-mode 
dialog effect is off.
Dimmer mode
SC-HTB770PPC_RQT9778-1P_mst.book  Page 34  Tuesday, January 29, 2013  11:33 AM 
						

							Operations
RQT977835
∫Remote control code
When other Panasonic devices respond to this system’s 
remote control, change the remote control code on this 
system and the remote control.
Preparation≥Turn off all other Panasonic products.
≥Turn on the main unit.
Change the remote control code to code 2:
1 Aim the remote control at the main unit’s 
remote control sensor.
2 Press and hold [MUTE] and [ ] on the remote 
control for more than 4 sec.
≥All the indicators will blink for 10 sec when the code of 
this system is changed.
≥The setting is maintained until it is changed again.
	≥If the main unit does not operate after changing the code, 
repeat steps 1 and 2.
≥To change the remote control code to code 1, repeat the 
steps above, but replace 
[] with [INPUT SELECTOR]. 
∫To reduce the clear-mode dialog effect
When the dialog does not sound natural while the volume 
is set low, it is possible to reduce the dialog enhancing 
effect as follows:
While pressing and holding [SOUND] on the 
remote control, press and hold [sVOL] on the 
main unit for more than 4 sec.
≥All the indicators will blink once when the clear-mode dialog 
effect is reduced.
≥Even if clear-mode dialog effect is reduced, dialog effect 
level is still adjustable.
	To reset the setting, return to the factory preset. (>36)
∫To turn off VIERA Link “HDAVI 
Control”
When “HDAVI Control” compatible equipment does not 
work well with this system, for example, it is possible to 
turn off this function as follows:
≥When VIERA Link is turned off, the ARC function is not 
available. Be sure to connect the optical digital audio 
cable. (>26)
1 While pressing and holding [MUTE] on the 
remote control, press and hold [sVOL]  on the 
main unit for more than 4 sec.
2 After the setting has changed, turn off all the 
connected devices and then turn them on 
again.
≥All the indicators will blink once when VIERA Link “HDAVI 
Control” is turned off.
	To reset the setting, return to the factory preset. (>36)
∫To turn off the volume limitation
If a state of the lowered volume disturbs you every time 
the main unit turns on, for example, it is possible to turn off 
this function as follows:
While pressing and holding [MUTE] on the remote 
control, press and hold [VOLi] on the main unit 
for more than 4 sec.
≥All the indicators will blink once when the volume limitation 
is turned off.
	To reset the setting, return to the factory preset. (>36)
Others
SC-HTB770PPC_RQT9778-1P_mst.book  Page 35  Tuesday, January 29, 2013  11:33 AM 
						

							36RQT9778
3FGFSFODFTroubleshooting
Before requesting service, make the following checks. If 
you are in doubt about some of the check points, or if the 
solutions indicated in the following guide do not solve the 
problem, refer to “Customer Services Directory (United 
States and Puerto Rico)” on page 42 if you reside in the 
U.S.A. or Puerto Rico, or refer to “WARRANTY SERVICE” 
on page 43 if you reside in Canada.
No power.≥Insert the AC power supply cord securely. (>28)
≥After turning the main unit on, if the indicators blink and 
the main unit immediately turns off, unplug the AC 
power supply cord and consult your dealer.
The remote control does not work properly.≥The battery is depleted. Replace it with a new one. 
(>9)
≥It is possible that the insulation sheet has not been 
removed. Remove the insulation sheet. (>9)
≥It may be necessary to set the code of the remote 
control again after changing the battery of the remote 
control. (>35)
≥Use the remote control within the correct operation 
range. (>9)
The “TV” indicator blinks.Remove the AC power supply cord and consult your 
dealer. If there are any other indicators blinking, be sure to 
inform your dealer about the blinking indicators.
The main unit is automatically switched to 
standby mode.
The main unit will automatically switch to standby mode 
when no signal is input and no operation is performed for 
approx. 30 minutes. (>28)
The main unit is turned off when the TV’s 
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link (HDAVI 
Control 4 or later). Please read the operating instructions 
for the TV for details about its power save feature. (>32)
This system does not operate correctly.If the HDMI cable is connected to the wrong terminal 
(HDMI IN or HDMI OUT), this system will not operate 
correctly. Turn the main unit off, disconnect the AC power 
supply cord and reconnect the HDMI cable(s). (>26, 27)
VIERA Link related operations no longer 
function properly.
≥Check the VIERA Link setting on the connected 
devices.
≥Have you turned the VIERA Link settings off? (>35)
≥When the HDMI connections are changed, after a 
power failure or after the AC power supply cord has 
been removed, VIERA Link operations may not function 
properly.
jTurn on all the devices that are connected to the TV 
with an HDMI cable and then turn the TV on.
jTurn off the VIERA Link settings of the TV and turn it 
on again. For details refer to the operating 
instructions for the TV.
jWhile the main unit and the TV are connected with 
the HDMI cable, turn on the TV and then remove the 
main unit’s AC power supply cord and reconnect it 
again.
The first few seconds of audio cannot be heard 
when using the HDMI connection.
This may occur during DVD-Video chapter playback. 
Change the digital audio output setting on the connected 
device from “Bitstream” to “PCM”.
When operating an HDMI compatible device of 
a different brand, the main unit reacts in an 
unwanted manner.
HDAVI Control commands may use a different signal 
depending on the brand of the device. In this case, turn 
VIERA Link off. (>35)
Pairing cannot be done.Check the Bluetooth® device condition.
The device cannot be connected.≥The pairing of the device was unsuccessful or the 
registration has been replaced. Try pairing the device 
again. (>29)
≥This system might be connected to a different device. 
Disconnect the other device and try pairing the device 
again.
The device is connected but audio cannot be 
heard through this system.
For some built-in Bluetooth® devices, you have to set the 
audio output to “SC-HTB770” manually. Read the 
operating instructions for the device for details.
To return to the factory preset.
While the main unit is on, press [Í/I] on the main 
unit for more than 4 sec.
(All the indicators will blink twice when this 
system is reset.)
If this system does not operate as expected, 
returning the settings to the factory preset 
may solve the problem.
≥The remote control code will return to “1” when 
this system is returned to the factory preset. To 
change the remote control code, refer to page 
35.
General operation
HDMI
Bluetooth®
SC-HTB770PPC_RQT9778-1P_mst.book  Page 36  Tuesday, January 29, 2013  11:33 AM 
						

							Reference
RQT977837
The sound is interrupted.≥The device is out of the 10 m (33 ft) communication 
range. Bring the Bluetooth® device closer to the main 
unit.
≥Remove any obstacle between the main unit and the 
device.
≥Other devices that use the 2.4 GHz frequency band 
(wireless router, microwaves, cordless phones, etc.) are 
interfering. Bring the Bluetooth
® device closer to the 
main unit and distance it from the other devices.
≥Select “MODE1” for stable communication. (>34)
No sound (or image).≥Turn muting off. (>30)
≥Check the connections to the other devices. (>26, 27) 
≥Make sure that the received audio signal is compatible 
with this system. (>38)
≥Turn this system off and then on again.
≥If the main unit is connected to the TV with only an 
HDMI cable, make sure that the TV’s HDMI terminal is 
labeled “HDMI (ARC)”. If not, connect using the optical 
digital audio cable. (>26)
≥If the main unit is connected to a Panasonic TV and 
turned on using the button on the main unit or the 
remote control, sound might not be output from this 
system. In this case, turn the main unit on using the 
TV’s remote control. (>32)
≥If the connections are correct, there might be a problem 
with the cables. Redo the connections with different 
cables.
≥Check the audio output settings on the connected 
device.
≥If the BD/DVD indicator flashes and there is no audio 
output, try the following.
1Turn the connected device off and then on.
2Turn off the main unit, remove the HDMI cable, then 
reconnect the HDMI cable and turn the main unit 
back on.
The dual audio cannot be changed from main 
to secondary.
If the audio received from the connected device is not 
“Dolby Dual Mono” or the output setting is not “Bitstream”, 
the setting cannot be changed from this system. Change 
the setting on the connected device.
The volume is lowered when the main unit is 
turned on.
If the main unit is turned off with the volume setting in the 
greater half (above 50), the main unit will automatically 
lower the volume to the middle (50) when the main unit is 
turned on. (>35)
The dialog is too persistent or the dialog does 
not sound natural.
This system has a function to make the dialog stand out 
when the volume is low. (>35)
There is no audio.
The power of the main unit turns off 
automatically.
(When the main unit detects a problem, a safety measure 
is activated and the main unit automatically switches to 
standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high?
If so, lower the volume.
≥Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few 
moments and then try to turn it on again.
If the problem persists, confirm the TV indicator and
BD/DVD indicator blink, turn this system off, remove the 
AC power supply cord and consult your dealer. Please be 
sure to remember the indicators that were blinking and 
inform the dealer.
No power.Ensure the AC power supply cord of the active subwoofer 
is connected properly.
After turning the subwoofer on, it immediately 
turns off.
Unplug the AC power supply cord and consult your dealer.
No sound from the subwoofer.≥Check that the active subwoofer is turned on.
≥Check that the WIRELESS LINK indicator lights green. 
(>29)
The WIRELESS LINK indicator lights red.≥There is no link between the main unit and the active 
subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back on. 
Alternatively, turn the active subwoofer off, 
disconnect the AC power supply cord and then 
reconnect it.
≥The active subwoofer and the main unit may not be 
paired correctly. Try the following operation. (Wireless 
pairing)
1Turn on the main unit and active subwoofer.
2Press [ID SET] on the rear of the active subwoofer 
for more than 3 sec. 
(The WIRELESS LINK indicator will blink in red.)
3While pressing and holding [INPUT SELECTOR] on 
remote control, press and hold [VOLi] on the main 
unit for more than 4 sec. (The BD/DVD indicator will 
blink and sound mode indicators light up in 
sequence.)
≥When the wireless pairing is successful, BD/DVD 
indicator will stop flashing and WIRELESS LINK 
indicator lights green. 
4Turn the main unit off and on.
≥Consult your dealer if the problem persists.
Sound
Active Subwoofer
SC-HTB770PPC_RQT9778-1P_mst.book  Page 37  Tuesday, January 29, 2013  11:33 AM 
						

							38RQT9778
Specifications
AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
60 W per channel (6≠),1kHz,10%THD
Center ch (C ch)
60 W per channel (6≠),1kHz,10%THD
Subwoofer ch
120 W per channel (8≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power
 300 W
FTC output power: Dolby Digital Mode
Front ch (L, R ch)
25 W per channel (6≠),
120 Hz to 20 kHz, 1.0 % THD
Center ch (C ch)
25 W per channel (6≠),
120 Hz to 20 kHz, 1.0 % THD
Subwoofer ch
40 W per channel (8≠),
60 Hz to 120 Hz, 1.0 % THD
Total FTC Dolby Digital mode power
11 5 W
TERMINAL SECTION
HDAVI Control
This unit supports “HDAVI Control 5” function.
HDMI AV input (BD/DVD, AUX1, AUX2) 3
Input connectorType A (19 pin)
HDMI AV output (TV (ARC)) 1
Output connectorType A (19 pin)
Digital audio input
Optical digital input (TV, AUX3) 2
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
LPCM, Dolby Digital, DTS Digital Surround
USB Port For service use only.
SPEAKER SECTION
Front speakers
3 way, 3 speaker system (Bass reflex type)
Speaker unit(s)Impedance 6≠
Woofer
5.7 cm (2
1/4q) cone type
Tweeter
2.5 cm (1q) semi-dome type
Super tweeterPiezo type
Output sound pressure 78 dB/W (1 m)
Frequency range
90 Hz to 32 kHz (`16 dB)
100 Hz to 23 kHz (`10 dB)
Center speaker
2 way, 2 speaker system (Bass reflex type)
Speaker unit(s)Impedance 6≠
Woofer
5.7 cm (2
1/4q) cone type
Super tweeterPiezo type
Output sound pressure 78 dB/W (1 m)
Frequency range
110 Hz to 20 kHz (`16 dB)
150 Hz to 16 kHz (
`10 dB)
Active subwoofer
1 way, 1 speaker system (Bass reflex type)
Woofer
16 cm (6
1/2q) cone type
Output sound pressure 80 dB/W (1 m)
Frequency range30 Hz to 180 Hz (
`16 dB)
35 Hz to 160 Hz (
`10 dB)
WIRELESS SECTION
Wireless module
Frequency Range 
2.40335 GHz to 2.47735 GHz
No. of channels   38
SC-HTB770PPC_RQT9778-1P_mst.book  Page 38  Tuesday, January 29, 2013  11:33 AM 
						

							Reference
RQT977839
	1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum 
analyzer.
GENERAL
Power consumptionMain unit: 37 W
Active subwoofer: 20 W
In standby condition
Main unit (When the other connected devices 
are turned off):  Approx. 0.25 W
Active subwoofer 
(Power switch release):  Approx. 0.2 W
Power supplyAC 120 V, 60 Hz
Dimensions (WkHkD)
Main unit
310 mmk45 mmk188 mm
(12
3/16qk112/16qk76/16q)
Active subwoofer
180 mmk408 mmk306 mm
(7
3/32qk161/16qk121/16q)
Mass (Weight)
Main unitApprox. 1.15 kg(2.54 lbs)
Active subwoofer4.76 kg(10.5 lbs)
Operating temperature range
0
oC to r40oC (r32oF to r104oF)
Operating humidity range
20 % to 80 % RH (no condensation)
Bluetooth® SECTION
Bluetooth® system specification
Version 3.0
Wireless equipment classification
Class 2
Supported profilesA2DP
Frequency band
2402 MHz to 2480 MHz
(Adaptive Frequency Hopping)
Operating distance10 m (33 ft) Line of Sight
SPEAKER GENERAL
For wall mounting layout
Horizontal placement
Dimensions 
(WkHkD)
1230 mmk68 mmk41 mm
(487/16qk211/16qk110/16q)
Mass (Weight)1.98 kg(4.37 lbs)
Vertical placement of front speakers
Front Speaker
Dimensions 
(WkHkD)68 mmk541 mmk41 mm
(2
11/16qk215/16qk110/16q)
Mass (Weight)0.78 kg(1.72 lbs)
Center Speaker
Dimensions 
(WkHkD)178 mmk70 mmk45 mm
(7qk2
3/4qk112/16q)
Mass (Weight)0.37 kg(0.82 lbs)
For table top layout
Horizontal placement using the leg stands (High)
Dimensions 
(WkHkD)1230 mmk96 mmk68 mm(487/16qk312/16qk211/16q)
Mass (Weight)2.04 kg(4.50 lbs)
Horizontal placement using the leg stands (Low)
Dimensions 
(WkHkD)1230 mmk87 mmk68 mm
(487/16qk37/16qk211/16q)
Mass (Weight)2.04 kg(4.50 lbs)
Horizontal placement using the support legs 
and the speaker feet
Dimensions 
(WkHkD)
1230 mmk71 mmk60 mm
(487/16qk213/16qk26/16q)
Mass (Weight)2kg(4.41 lbs)
Vertical placement of front speakers
Front Speaker
Dimensions 
(WkHkD)
148 mmk552 mmk148 mm
(513/16qk2112/16qk513/16q)
Mass (Weight)0.89 kg(1.96 lbs)
Center Speaker
Dimensions 
(WkHkD)178 mmk71 mmk44 mm
(7qk2
13/16qk112/16q)
Mass (Weight)0.37 kg(0.82 lbs)
SC-HTB770PPC_RQT9778-1P_mst.book  Page 39  Tuesday, January 29, 2013  11:33 AM 
						

							40RQT9778
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below 
are displayed during normal operational conditions. They do not refer to the indications of a problem.
§1  The indicator for the current status remains lit.
§2  The BD/DVD indicator stops blinking and lights once the wireless pairing is successful.
§3  The indicator blinks only when [SOUND] is pressed for more than 4 sec and the audio format is PCM. Indicator Description
The BD/DVD indicator blinks§2 and sound mode 
indicators light up in sequence for 1 minute.
≥When the main unit is in wireless pairing mode with the 
active subwoofer (>37)
The indicator blinks for 10 sec.
≥When the Bluetooth
® communication is mode 1 (>34)
The indicator blinks for 20 sec.
≥When 3D surround effect and clear-mode dialog effect 
are on (>34)
≥When the dual audio setting is Main (>33)
≥When the auto gain control is on (>33)
The indicator blinks for 5 sec.
≥When the audio format is Dolby Digital (>33)
The indicator blinks for 5 sec.
≥When the audio format is DTS (>33)
The indicator blinks for 5 sec.
≥When the audio format is PCM
§3 (>33)
The indicator blinks for 10 sec.
≥When the Bluetooth
® communication is mode 2 (>34)
The indicator blinks for 20 sec.
≥When 3D surround effect and clear-mode dialog effect 
are off (>34)
≥When the dual audio setting is Secondary (SAP: 
Secondary Audio Program) (>33)
≥When the auto gain control is off (>33)
The indicators blink for 20 sec.
≥When the dual audio setting is Main and Secondary 
(>33)
The indicators blink for 10 sec.
≥When the remote control code is changed (>35)
The indicators blink once.
≥When changing the setting (“To reduce the clear-mode 
dialog effect”, “To turn off VIERA Link “HDAVI Control””, 
and “To turn off the volume limitation”) (>35)
The indicators blink twice.
≥When the main unit is reset (>36)
Bluetooth
® indicator blinks quickly.
≥When the main unit is ready for pairing
Bluetooth
® indicator blinks slowly.
≥When the main unit is waiting to connect 
Bluetooth
® indicator turns on.
≥When the main unit is connected with a Bluetooth® 
device
1
1
1
1
SC-HTB770PPC_RQT9778-1P_mst.book  Page 40  Tuesday, January 29, 2013  11:33 AM