Panasonic Sc Htb770 Owners Manual
Have a look at the manual Panasonic Sc Htb770 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getting started RQT977811 ≥Use a screwdriver (i) for assembling the speakers. ≥Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them. When carrying the active subwoofer To avoid interference, maintain the following distances between the main unit/active subwoofer and other electronic devices that use the same radio frequency (2.4 GHz band). ≥Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward. ≥Do not use the main unit or the active subwoofer in a metal cabinet. ≥Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with thick curtains. ≥If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away from the TV. ≥Keep magnetized items away. Magnetized cards, watches, etc., can be damaged if placed too close to the active subwoofer and the speakers. Caution≥This system is to be used only as indicated in these instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥Do not attempt to attach the speakers to a wall using methods other than those described in this manual. The speaker system ∫When attaching the speakers to a wall The wall or pillar on which the speakers are to be attached should be capable of supporting 33 kg (72.8 lbs) per screw. Consultation with a qualified installation specialist is recommended when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers, and personal injury. ∫When placing the speakers in front of the TVThe speakers may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV. ≥If the leg stands are being usedChange the height of the leg stands and/or move the speakers further away from the TV. If the TV still does not function correctly, try removing the leg stands. ≥If the leg stands are not usedMove the speakers further away from the TV. If the TV still does not function properly, try placing them beside the TV (>10). The active subwoofer ADo not hold the active subwoofer from this opening. The parts inside may get damaged. BAlways hold the bottom of the active subwoofer when moving it. Wireless interference CMain unit/active subwoofer DWireless router, cordless phone and other electronic devices: approx. 2 m (6 1/2ft) A B DC SC-HTB770PPC_RQT9778-1P_mst.book Page 11 Tuesday, January 29, 2013 11:33 AM
12RQT9778 Step 2 Assembling the speakers The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation. ≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” (>13). ≥For a safety measure to prevent the speakers from falling, refer to page 24. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. ≥There is no left and right for the center speaker. ≥The two front speakers are interchangeable. ≥Keep the screws out of reach of children to prevent swallowing. When attaching the speakers to a wall Place the speakers horizontally ∏2 Front speakers∏1 Center speaker∏3 Speaker cables WHITE: Left RED: Right GREEN: Center ∏1 Metal bracket∏4 Screws AScrew (supplied) ≥Tighten securely. SC-HTB770PPC_RQT9778-1P_mst.book Page 12 Tuesday, January 29, 2013 11:33 AM
Getting started RQT977813 Connect the speaker cables. § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above). Drive a screw into the wall. ≥Use the measurements indicated below to identify the screwing positions on the wall. ≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥Keep the screws out of reach of children to prevent swallowing. 1Insert the wire fully. r: White s: Blue line ≥Insert the wire fully, taking care not to insert beyond the wire insulation. 2Press into the groove.ARight speaker connector BCenter speaker connector CLeft speaker connector AAt least 30 mm (1 3/16q) B‰4.0 mm (5/32q) C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q) DWall or pillar E5.5 mm to 6.5 mm ( 7/32q to 1/4q) F238 mm (9 3/8q)G745 mm (2911/32q)H248 mm (93/4q)I20 mm (25/32q) JWall mounting hole 45 Push RedWhite Green Front view (semi-transparent image) SC-HTB770PPC_RQT9778-1P_mst.book Page 13 Tuesday, January 29, 2013 11:33 AM
14RQT9778 Wall mount the speakers: Fit the speaker securely onto the screw(s). Red connector:The speaker attached to the red connector cable is to be placed on the right side. White connector: The speaker attached to the white connector cable is to be placed on the left side. ARight speaker connector BLeft speaker connector DODO NOT ≥Move the speaker so that the screw is in this position.≥In this position, the speaker will likely fall if moved to the left or right. Red White SC-HTB770PPC_RQT9778-1P_mst.book Page 14 Tuesday, January 29, 2013 11:33 AM
Getting started RQT977815 The speakers can be wall mounted by drilling screws into the wall, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).The screws and other items are not supplied as the type and size will vary with each installation. ≥For details about the required screws, refer to the diagram below the step “Drive a screw into the wall.” (>17). ≥For a safety measure to prevent the speakers from falling, refer to page 24. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the center speaker: Attach the side caps and hook brackets to the speaker. ≥There is no left and right for the center speaker. ≥Keep the screws out of reach of children to prevent swallowing. Place the front speakers vertically ∏2 Front speakers∏1 Center speaker∏3 Speaker cables WHITE: Left RED: Right GREEN: Center ∏2 Stand necks∏2 Side caps∏4 Screws ∏2 Hook brackets AHook bracket (supplied) BScrew (supplied) ≥Tighten securely. SC-HTB770PPC_RQT9778-1P_mst.book Page 15 Tuesday, January 29, 2013 11:33 AM
16RQT9778 Assemble the center speaker: Connect the speaker cable. ≥Insert the wire fully, taking care not to insert beyond the wire insulation. Assemble the front speakers: Attach the stand neck. ≥The two front speakers are interchangeable. ≥Keep the screws out of reach of children to prevent swallowing. Assemble the front speakers: Connect the speaker cables. § If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above).ACenter speaker connector 1 Insert the wire fully. r: White s: Blue line AScrew (supplied) ≥Tighten securely. 1 Insert the wire fully. r: White s: Blue line ≥Insert the wire fully, taking care not to insert beyond the wire insulation. 2 Press into the groove. PushGreen 45 Push SC-HTB770PPC_RQT9778-1P_mst.book Page 16 Tuesday, January 29, 2013 11:33 AM
Getting started RQT977817 Drive a screw into the wall. ≥Use the measurements indicated below to identify the screwing positions on the wall. ≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥Keep the screws out of reach of children to prevent swallowing. Front speakers A At least 30 mm (13/16q)B‰4.0 mm (5/32q) C‰7.0 mm to ‰9.4 mm ( 9/32q to 3/8q) DWall or pillar E5.5 mm to 6.5 mm ( 7/32q to 1/4q) FFront speaker (Rear view) G100 mm (3 15/16q) H436 mm (175/32q) I34 mm (111/32q) JWall mounting hole Center speaker KAt least 30 mm (1 3/16q) L‰4.0 mm (5/32q) M‰7.0 mm to ‰9.4 mm ( 9/32q to 3/8q) NWall or pillar O1.6 mm to 2.5 mm ( 1/16q to 3/32q) PMax. 3.5 mm ( 9/64q) QCenter speaker (Rear view) R18 mm ( 23/32q) S147 mm (525/32q) T13 mm (1/2q) U19.6 mm (25/32q) V50.2 mm (131/32q) SC-HTB770PPC_RQT9778-1P_mst.book Page 17 Tuesday, January 29, 2013 11:33 AM
18RQT9778 Fit the speaker(s) securely onto the screw(s). Red connector:The speaker attached to the red connector cable is to be placed on the right side. White connector:The speaker attached to the white connector cable is to be placed on the left side. ALeft speaker connectorBRight speaker connector DODO NOT Front speakerCenter speakerFront speakerCenter speaker ≥Move the speaker so that the screw is in this position.≥In this position, the speaker will likely fall if moved to the left or right. Red White SC-HTB770PPC_RQT9778-1P_mst.book Page 18 Tuesday, January 29, 2013 11:33 AM
Getting started RQT977819 ≥For a safety measure to prevent the speakers from falling, refer to page 24. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (>12, 13). Attach the leg stands. ≥Keep the screws out of reach of children to prevent swallowing. When placing the speakers on a table Place the speakers using the leg stands ∏2 Front speakers∏1 Center speaker∏3 Speaker cables WHITE: Left RED: Right GREEN: Center ∏1 Metal bracket∏2 Leg stands∏6 Screws Red connector:With the speaker facing down, the speaker attached to the red connector cable is to be placed on the left side. White connector:With the speaker facing down, the speaker attached to the white connector cable is to be placed on the right side. AScrew (supplied) ≥Tighten securely.BScrew holeCRight speaker connector DLeft speaker connector Align the higher or lower holes with the projecting parts on the speaker. ≥By changing the position that the stand is attached to the projecting parts, the height can be adjusted by 9 mm ( 11/32q). RedWhite SC-HTB770PPC_RQT9778-1P_mst.book Page 19 Tuesday, January 29, 2013 11:33 AM
20RQT9778 ≥For a safety measure to prevent the speakers from falling, refer to page 24. ≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” (>12, 13). Attach the support legs and speaker feet. ≥Keep the screws and the speaker feet out of reach of children to prevent swallowing. Place the speakers using the support legs and speaker feet ∏2 Front speakers∏1 Center speaker∏3 Speaker cables WHITE: Left RED: Right GREEN: Center ∏1 Metal bracket∏2 Support legs∏6 Screws ∏2 Speaker feet Red connector:With the speaker facing down, the speaker attached to the red connector cable is to be placed on the left side. White connector:With the speaker facing down, the speaker attached to the white connector cable is to be placed on the right side. AScrew (supplied) ≥Tighten securely.BScrew hole CSpeaker foot (supplied)DRight speaker connector ELeft speaker connector Align the projecting parts on the speaker with support leg. RedWhite SC-HTB770PPC_RQT9778-1P_mst.book Page 20 Tuesday, January 29, 2013 11:33 AM