Panasonic Projector Pt Ex12ku Operating Instructions
Here you can view all the pages of manual Panasonic Projector Pt Ex12ku Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
[Setting] menu
ENGLISH - 81
Settings
■
■ [Effect]
Sets special effects when shutter is opened and
closed.
1)
Select [Effect], and press the
button.
2) Press
▲▼ to switch the setting.
[Off][L 1][L 2]
[Off]
Does not set special effects.
[L 1] Sets fade in and fade out when the
shutter is opened and closed.
[L 2] Sets slower fade in and fade out
than L1.
■
■ [Release key]
Sets the release button when shutter is closed.
1)
Select [Release key], and press the
button.
2) Press
▲▼ to switch the...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-80.png "Page 81
[Setting] menu
ENGLISH - 81
Settings
■
■ [Effect]
Sets special effects when shutter is opened and
closed.
1)
Select [Effect], and press the
button.
2) Press
▲▼ to switch the setting.
[Off][L 1][L 2]
[Off]
Does not set special effects.
[L 1] Sets fade in and fade out when the
shutter is opened and closed.
[L 2] Sets slower fade in and fade out
than L1.
■
■ [Release key]
Sets the release button when shutter is closed.
1)
Select [Release key], and press the
button.
2) Press
▲▼ to switch the...")
[Setting] menu ENGLISH - 81 Settings ■ ■ [Effect] Sets special effects when shutter is opened and closed. 1) Select [Effect], and press the button. 2) Press ▲▼ to switch the setting. [Off][L 1][L 2] [Off] Does not set special effects. [L 1] Sets fade in and fade out when the shutter is opened and closed. [L 2] Sets slower fade in and fade out than L1. ■ ■ [Release key] Sets the release button when shutter is closed. 1) Select [Release key], and press the button. 2) Press ▲▼ to switch the...
Page 82
![Page 82
[Setting] menu
82 - ENGLISH
Settings
[Video delay control]
Sets when you want to speed up digital processing of
the images being projected.
1) Press
▲▼ to select [Video delay
control].
2) Press the button.
3) Press
▲▼ to switch the setting.
[Off][Low]
[High][Mid]
Note ■
z The speed of digital processing increases through
[Low]
→ [Mid]
→ [High].
■
z When each item is selected, the following items are
grayed out and cannot be selected.
[Low]
■
z [Keystone] of the [Screen] menu
[Mid] ■
z...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-81.png "Page 82
[Setting] menu
82 - ENGLISH
Settings
[Video delay control]
Sets when you want to speed up digital processing of
the images being projected.
1) Press
▲▼ to select [Video delay
control].
2) Press the button.
3) Press
▲▼ to switch the setting.
[Off][Low]
[High][Mid]
Note ■
z The speed of digital processing increases through
[Low]
→ [Mid]
→ [High].
■
z When each item is selected, the following items are
grayed out and cannot be selected.
[Low]
■
z [Keystone] of the [Screen] menu
[Mid] ■
z...")
[Setting] menu 82 - ENGLISH Settings [Video delay control] Sets when you want to speed up digital processing of the images being projected. 1) Press ▲▼ to select [Video delay control]. 2) Press the button. 3) Press ▲▼ to switch the setting. [Off][Low] [High][Mid] Note ■ z The speed of digital processing increases through [Low] → [Mid] → [High]. ■ z When each item is selected, the following items are grayed out and cannot be selected. [Low] ■ z [Keystone] of the [Screen] menu [Mid] ■ z...
Page 83
![Page 83
[Setting] menu
ENGLISH - 83
Settings
■
■ [Filter counter timer]
Sets a time to display a notification that the filter
has reached the end of its replacement cycle.
1)
Select [Filter counter timer], and press
the button.
2) Press
▲▼ to switch the setting.
[Off][1000 H]
[12000 H]
[2000 H]
[8000 H][3000 H]
[6000 H][4000 H]
Note ■
z When [Off] is selected, blockages are detected
automatically.
■
z When the set time is exceeded,
is displayed.
■
■ [Filter counter reset]
Resets the value of [Filter...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-82.png "Page 83
[Setting] menu
ENGLISH - 83
Settings
■
■ [Filter counter timer]
Sets a time to display a notification that the filter
has reached the end of its replacement cycle.
1)
Select [Filter counter timer], and press
the button.
2) Press
▲▼ to switch the setting.
[Off][1000 H]
[12000 H]
[2000 H]
[8000 H][3000 H]
[6000 H][4000 H]
Note ■
z When [Off] is selected, blockages are detected
automatically.
■
z When the set time is exceeded,
is displayed.
■
■ [Filter counter reset]
Resets the value of [Filter...")
[Setting] menu ENGLISH - 83 Settings ■ ■ [Filter counter timer] Sets a time to display a notification that the filter has reached the end of its replacement cycle. 1) Select [Filter counter timer], and press the button. 2) Press ▲▼ to switch the setting. [Off][1000 H] [12000 H] [2000 H] [8000 H][3000 H] [6000 H][4000 H] Note ■ z When [Off] is selected, blockages are detected automatically. ■ z When the set time is exceeded, is displayed. ■ ■ [Filter counter reset] Resets the value of [Filter...
Page 84
![Page 84
[Setting] menu
84 - ENGLISH
Settings
■
■ [Restart]
Restarts the count-up or countdown that was
paused using [Stop].
1)
Select [Restart], and press the
button.
■
z The menu screen is cleared and the timer is
displayed.
■
■ [Reset]
Resets the counted time during operation.
1)
Select [Reset], and press the
button.
■
z The count-up is returned to “000:00” and the
countdown is returned to the time set on the
timer.
■
■ [Exit]
Exits the presentation timer during operation.
1)
Select [Exit], and...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-83.png "Page 84
[Setting] menu
84 - ENGLISH
Settings
■
■ [Restart]
Restarts the count-up or countdown that was
paused using [Stop].
1)
Select [Restart], and press the
button.
■
z The menu screen is cleared and the timer is
displayed.
■
■ [Reset]
Resets the counted time during operation.
1)
Select [Reset], and press the
button.
■
z The count-up is returned to “000:00” and the
countdown is returned to the time set on the
timer.
■
■ [Exit]
Exits the presentation timer during operation.
1)
Select [Exit], and...")
[Setting] menu 84 - ENGLISH Settings ■ ■ [Restart] Restarts the count-up or countdown that was paused using [Stop]. 1) Select [Restart], and press the button. ■ z The menu screen is cleared and the timer is displayed. ■ ■ [Reset] Resets the counted time during operation. 1) Select [Reset], and press the button. ■ z The count-up is returned to “000:00” and the countdown is returned to the time set on the timer. ■ ■ [Exit] Exits the presentation timer during operation. 1) Select [Exit], and...
Page 85
![Page 85
[Information] menu
ENGLISH - 85
Settings
[Information] menu
Select [Information] from the main menu on the
menu screen.
For operation of the menu screen, refer to
“Navigating through menu” (
page 50).
■
z Press
◀▶ to switch the items.
Control panel
Remote control
■
z You can also display sub menus using the
button on the remote control.
Confirming the settings and
usage state
Displays state of signals during projection, and current
settings.
■
■ [Input]
Displays type of inputs and signals during...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-84.png "Page 85
[Information] menu
ENGLISH - 85
Settings
[Information] menu
Select [Information] from the main menu on the
menu screen.
For operation of the menu screen, refer to
“Navigating through menu” (
page 50).
■
z Press
◀▶ to switch the items.
Control panel
Remote control
■
z You can also display sub menus using the
button on the remote control.
Confirming the settings and
usage state
Displays state of signals during projection, and current
settings.
■
■ [Input]
Displays type of inputs and signals during...")
[Information] menu ENGLISH - 85 Settings [Information] menu Select [Information] from the main menu on the menu screen. For operation of the menu screen, refer to “Navigating through menu” ( page 50). ■ z Press ◀▶ to switch the items. Control panel Remote control ■ z You can also display sub menus using the button on the remote control. Confirming the settings and usage state Displays state of signals during projection, and current settings. ■ ■ [Input] Displays type of inputs and signals during...
Page 86
![Page 86
[Network] menu
86 - ENGLISH
Settings
[Network] menu
Select [Network] from the main menu on the
menu screen, and select the item from the sub
menu.
For operation of the menu screen, refer to
“Navigating through menu” (
page 50).
■
z After selecting the item, press
◀▶▲▼ to make
the setting.
Control panel
Remote control
Note
■
z Set when connecting the projector to a computer
over a network. For details of PJLink and network,
refer to “Operating Instructions – Network
Operations”.
■
■ [Projector...](http://img.usermanuals.tech/thumb/58/94281/w300_panasonic-pt-ex12ku-manual_d-85.png "Page 86
[Network] menu
86 - ENGLISH
Settings
[Network] menu
Select [Network] from the main menu on the
menu screen, and select the item from the sub
menu.
For operation of the menu screen, refer to
“Navigating through menu” (
page 50).
■
z After selecting the item, press
◀▶▲▼ to make
the setting.
Control panel
Remote control
Note
■
z Set when connecting the projector to a computer
over a network. For details of PJLink and network,
refer to “Operating Instructions – Network
Operations”.
■
■ [Projector...")
[Network] menu 86 - ENGLISH Settings [Network] menu Select [Network] from the main menu on the menu screen, and select the item from the sub menu. For operation of the menu screen, refer to “Navigating through menu” ( page 50). ■ z After selecting the item, press ◀▶▲▼ to make the setting. Control panel Remote control Note ■ z Set when connecting the projector to a computer over a network. For details of PJLink and network, refer to “Operating Instructions – Network Operations”. ■ ■ [Projector...
Page 87
About indicator status ENGLISH - 87 Maintenance About indicator status If an indicator turns on If a problem occurs within the projector, it will be notified with the temperature indicator /filter indicator /shutter indicator /lamp indicator and . Check the status of the indicators and take the following action.Attention■ z Make sure to follow the procedures in “Powering off the projector” ( page 44) to control the power when implementing measures. ■ z If multiple indicators have turned on or are...
Page 88
About indicator status 88 - ENGLISH Maintenance ■ ■ When operating correctly The status of the indicator is displayed with the following symbols. s: Off, ●: On, H: Flashing, ■: On or Flashing Indicator Status of the projector Green RedRed Orange Blue / Orange s sssssThe power plug has been removed from the outlet. s ●s *1■*1■*1■*1 The projector is in the standby mode. Turns on when pressing the power button on the remote control or the power button on the control panel. ● ss *1■*1s ■*1The...
Page 89
About indicator status ENGLISH - 89 Maintenance ■ ■ When there is a problem with internal temperature The status of the indicator is displayed with the following symbols. s: Off, ●: On, H: Flashing, ■: On or Flashing Indicator Status of the projector Green RedRed Orange Blue / Orange ● sH*1■*2■*2■*2If the temperature within the projector becomes too high, the temperature indicator will start to flash slowly. s H *3H*4■*2■*2■*2 If the temperature within the projector becomes even higher, the...
Page 90
About indicator status 90 - ENGLISH Maintenance ■ ■ When there is a problem with internal power The status of the indicator is displayed with the following symbols. s: Off, ●: On, H: Flashing, ■: On or Flashing Indicator Status of the projector Green RedRed Orange Blue / Orange H*1● H*1H*1H*1H*1 A problem has been detected within the projector. The projector will not turn back on even when pressing the power button on the remote control or the power button on the control panel. Remove the...