Panasonic Projector Pt Ex12ku Operating Instructions

Attaching the lens
ENGLISH - 31
Getting Started
Correcting the focus
When the lens is attached to the projector and images are being projected onto the screen, the peripheral focus 
may be out of focus in some areas. If this happens, insert the supplied spacer between the lens attachment and 
the lens to adjust the focus.
Inserting the spacer corrects the distance on the lens adjustment and improves the diagonal focus. The corrected 
distance is determined by the thickness of the spacer to be inserted....

Attaching the lens
32 - ENGLISH
Getting Started
Attaching the lens hood strap
In order to prevent the lens hood from falling off, use the supplied strap to tie the projector and the lens hood.
1) Turn the lens hood counterclockwise 
to remove.
2)  Remove the screw C.
Lens hood
3) Thread the lens hood strap through 
the hole of the lens hood.
/HQVKRRGVWUDS 7KUHDGWKHVWUDSKHUH
$GMXVWLQJ WKHSRVLWLRQ RIWKH PHWDO SDUWRIWKH OHQV KRRG VWUDS
KHUHSXOOWKHOHQVKRRGVWUDSWRIL[
4)  Align the...

Attaching the lens
ENGLISH - 33
Getting Started
Lens specifications
Refer to the following tables for the lens specifications.
All measurements in the following tables are approximate. They may differ slightly from the actual measurements.
■
■ Projection distance and screen size
Projection distance (m)
Lens Model  No. ET-ELW02
ET-ELW03ET-ELW04
ET-ELW06 ET-ELS02ET-ELS03 ET-ELT02ET-ELT03ET-ELM01
Screen size (m (")) TELE
WIDE Fixed TELEWIDE TELEWIDE TELEWIDE TELEWIDE TELEWIDE TELEWIDE TELEWIDE
1.02...

Setting up
34 - ENGLISH
Getting Started
Setting up
Projection method
You can project images vertically and diagonally. You can select rear ( page  68) or ceiling ( page  68) from the 
menu. Select the projection method appropriate to the environment.
■
■ Mounting on the ceiling and 
projecting forward ■
■ Setting on a desk/floor and 
projecting from rear
(Using the translucent screen)
Menu item
Setting
[Ceiling] [On]
[Rear] [Off]Menu item Setting
[Ceiling] [Off]
[Rear] [On]
■
■ Mounting on the ceiling...

Setting up
ENGLISH - 35
Getting Started
Installation options (optional)
You can install the projector on the ceiling using the optional ceiling mount bracket (Product No.: ET-PKE16H (for 
high ceilings), ET-PKE16S (for low ceilings) and ET-PKE12B (for projector)).■
z Use only ceiling mount brackets specified for this projector.
■
z For details on installation of the projector with the bracket, refer to the installation manual for the ceiling mount 
bracket.
Attention ■
z To ensure the projector...

Connections
36 - ENGLISH
Getting Started
Connections
Before connecting to the projector
■
z Read carefully the instruction manual of the device you intend to connect.
■
z Turn off the power switch of the device before connecting the cable.
■
z If a connection cable is not supplied with the device and the optional cable is not available, prepare a 
connection cable to suit the device.
■
z Video signals containing too much jitter may cause the images on the screen to randomly wobble. In this case, 
a time...

Connections
ENGLISH - 37
Getting Started
Connecting example: AV equipment
9LGHR6YLGHR9SOD\HUDQG+0,YLGHR
RXWSXWGHYLFHV
7R+0,RXWSXW
7R$9+&39,
YLGHRRXWSXW7R,*,7$/,1!
WHUPLQDO
7R+0,,1!WHUPLQDO
7R9,(2,1!WHUPLQDO 7R

Connections
38 - ENGLISH
Getting Started
Tying up the cables using cable ties
Keep the cables tidy by fixing the cables connected to the terminals into the carry handle on the projector body.
■
z The cable ties can be reused. (The tab can be loosened and released.)
■
■ Loosening the cable ties
(i) (ii)Tab
Cable tie
1)  Pull the tab in the direction of arrow (i).
2)  Pull the tab in the direction of arrow (ii).
■
z The loop of the cable tie will widen.
Attention ■
z Note that the following points when you...

Installing an input module (optional)
ENGLISH - 39
Getting Started
Installing an input module (optional)
Installing an input module
■
■ Types of input modules
Purchase an input module (optional) matching the input signals of the system.
Module name
SD/HD-SDI input module
Module number ET-MD16SD1
Input/output  terminal BNC input 2 systems, BNC output 1 system
Compatible 
signal format SMPTE259M-C standard:
480-60i (59.94 Hz
*1), 576-50i (50 Hz)
SMPTE260M standard: 1035-60i (60/59.94 Hz
*1)
SMPTE274M...

Installing an input module (optional)
40 - ENGLISH
Getting Started
■
■ Using the input module
Consult your dealer before using any of the optional input modules.
When consulting your dealer, be sure to inform them of [Option control No.] of the projector.
[Option control No.] is displayed in the [Information] menu.
Inform your dealer\. of this number
.
\fanguage English
1\bH
Ready
5Min
Off
180Min
Off
Any All
13
Filter counter
Power management
Key lock
PIN code lock
Shutter management\.
Protection
Effect...