Panasonic Projector Pt Ex12ku Operating Instructions

Technical Information
ENGLISH - 101
Appendix
Technical Information
Adjusting screens of multiple screen images
[Edge blending] and [Color matching] allow images from multiple projectors to be overlapped seamlessly.
■
■ [Edge blending]
1) 
Check that the settings of [Screen] and [Image adjust] of each projector are the 
same.
2)  Project images from each projector that you want to overlap.
■
z The following is an example of how to overlap images from projector 
A and B.
6FUHHQ
,PDJH
$
3URMHFWRU $...

Technical Information
102 - ENGLISH
Appendix
6) Then use [Lens shift] to overlap the shaded areas.
■
z The red line will turn yellow if it is overlapped correctly.
Line (yellow)Frame (green): Pro\jje\fted image
E\bit
Edge blending
On
On All
Left
Right
Top
Bottom
Bla\fk level
Test pattern
Menu off Start
Width
Start
Width
Start
Width
Start
Width
All
Reset Ba\fk
Ne\bt
Move
Ba\fk E\bit
Edge blending
On
On All
Left
Right
Top
Bottom
Bla\fk level
Test pattern
Menu off Start
Width
Start
Width
Start
Width
Start...

Technical Information
ENGLISH - 103
Appendix
 
z Adjusting colors with a colorimeter
1)  Turn [Advanced color matching] to [On].
2)  Select [Test pattern] and press the  button.
■
z Displays the test pattern selection screen.
3) 
Select [Red] (or [Green], [Blue]) from [Measured] and press the  button.
■
z The test pattern is displayed.
Measured Test pattern
Exit
Target
Red
Green B\fue
Red
Green B\fue
Cyan
Magenta
Ye\f\f\bwWhite
4)  Measure the chromaticity coordinates (x, y) and luminance (Lx) using the...

Technical Information
104 - ENGLISH
Appendix
PJLink
This projector complies with Class1 as defined by JBMIA (Japan Business Machine and Information System 
Industries Association) PJLink standards. This projector is compatible with all commands defined by PJLink 
Class1, and verifies that it complies with Class1 standards defined by PJLink.
Projector input namePJLink
Input nameParameter
INPUT 1 RGB (PC Analog) RGB 111
RGB (Scart) RGB 313
RGB (PC Digital) DIGITAL 131
RGB (AV HDCP) DIGITAL 232
HDMI DIGITAL...

Technical Information
ENGLISH - 105
Appendix
■
■ PJLink
The PJLink subcommittee was established within the Data Projector Group in September 2003. 
The new 
PJLink interface specification for projectors was stipulated by the PJLink subcommittee as part of its first year of 
activities.
PJLink is a unified standard for the control and management of projectors.
The standard allows centralized management of projectors and operation with a controller , regardless of 
manufacturer.
JBMIA aims to provide early...

Technical Information
106 - ENGLISH
Appendix
■
■ Pin assignments and signal names
 terminal
Outside view Pin No.
Signal name Details
(1)
(5)
(6)
(9)
(1)
—NC
(2) TXDTransmitted data
(3) RXDReceived data
(4) —NC
(5) GNDGround
(6) —NC
(7) CTS
Connected internally
(8) RTS
(9) —NC
 terminal
Outside view Pin No.
Signal name Details
(1)(5)
(6) (9)
(1)
—NC
(2) RXDReceived data
(3) TXDTransmitted data
(4) —NC
(5) GNDGround
(6) —NC
(7) RTS
Connected internally
(8) CTS
(9) —NC
■
■ Transmission conditions
Signal...

Technical Information
ENGLISH - 107
Appendix
■
■ Basic format (with sub command)
Parameter (6 bytes\“)*1
Symbol “\f” or “-” (1\“ byte) an\b set 
value or a\bjustment\“ value (5 bytes)
Operation (1 byte)
*1
“=” (Value specifie\b\“ using parameter is\“ set)
Sub comman\b 
(5 bytes)
Same as basic form\“at
*1:  When sending commands without parameters, the operation (E) and parameter are not necessary .
■
■ List of commands
The following list shows commands to control the projector via a computer
.
 
z...

Technical Information
108 - ENGLISH
Appendix
 
z Command for lens control
CommandSubcommand
Details Note (parameters)
VXX LNSI2Lens H shift
+ 00000 = Fine adjustment 1 +, + 00001 = Fine adjustment 1 
-, 
+ 00100 = Fine adjustment 2 +, + 00101= Fine adjustment 2 
-, 
+ 00200 = Rough adjustment 1 +, + 00201 = Rough adjustment 1 
-
VXX LNSI3Lens V shift
VXX LNSI4Lens focus
VXX LNSI5Lens zoom 

Technical Information
ENGLISH - 109
Appendix
Other terminals
■
■  terminal pin assignments and signal names
Outside view Pin No.
Signal name
(1)
(2) (3)
(4)
(1)
GND (luminance signal)
(2) GND (color signal)
(3) Luminance signal
(4) Color signal
■
■  terminal pin assignments and signal names
Outside view Pin No.
Signal name
(4) is not used.
(5) to (8), (10), and (11) are GND 
terminals.
(10) (6)
(11)
(15) (1)
(5)
(1)
R
(2) G
(3) B
(9) +5 V
(12) DDC data
(13) HD/SYNC
(14) VD
(15) DDC clock
■
■  terminal...

Technical Information
110 - ENGLISH
Appendix
■
■  terminal pin assignments and signal names
Outside view Pin No.
Signal name Pin No.Signal name
(24)
(17) (16)
(9)
(8)
(1)
(1)
T.M.D.S data 2 -(13) —
(2) T.M.D.S data 2 + (14)+5 V
(3) T.M.D.S data 2/4
shield (15)
GND
(4) —(16)Hot plug detection
(5) —(17)T.M.D.S data 0 
-
(6)
DDC clock (18)T.M.D.S data 0 +
(7) DDC data (19)T.M.D.S data 0/5
shield
(8) —(20) —
(9) T.M.D.S data 1 
-(21) —
(10) T.M.D.S data 1 + (22)T.M.D.S clock
shield
(11) T.M.D.S data 1/3...