Panasonic Projector PT-EW730Z User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW730Z User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Chapter 3 Basic Operations — Projecting ENGLISH - 51 Projecting Check the attachment of the Projection Lens (x page 41), external device connection (x page 42), power cord connection (x page 47), and switch on the projector ( x page 48) to start projecting. Select the image for projection, and adjust appearance of the projected image. Selecting the input signal Select an input signal. 1) Press the button on the control panel or the input selection (, , , , , ) buttons on the remote control. f The...
Page 52
![Page 52
Chapter 3 Basic Operations — Projecting
52 - ENGLISH
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the button on the remote
control.
f The [HOME POSITION] screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
MENU
ENTER
2)
While the [HOME POSITION] screen is displayed (for approximately five seconds), press the
button.
f [PROGRESS] is displayed in the [HOME POSITION]...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-51.png "Page 52
Chapter 3 Basic Operations — Projecting
52 - ENGLISH
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the button on the remote
control.
f The [HOME POSITION] screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
MENU
ENTER
2)
While the [HOME POSITION] screen is displayed (for approximately five seconds), press the
button.
f [PROGRESS] is displayed in the [HOME POSITION]...")
Chapter 3 Basic Operations — Projecting 52 - ENGLISH Moving the lens to the home position To move the lens to the home position, perform the following procedure. 1) While the [SHIFT] adjustment screen is displayed, press the button on the remote control. f The [HOME POSITION] screen is displayed. LENS HOME POSITION EXECUTE CANCEL MENU ENTER 2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the button. f [PROGRESS] is displayed in the [HOME POSITION]...
Page 53
Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 53 Operating with the remote control Switching the input The input for projection can be switched. button 1) Press the input selection (, , , , , ) buttons. f This operation can be also performed using the button on the control panel. Switches the input to RGB1 or RGB2. Switches to another input when one input has already been chosen. Switches the input to DIGITAL LINK. Switches the input to DVI-D. Switch the input to...
Page 54
![Page 54
Chapter 3 Basic Operations — Operating with the remote control
54 - ENGLISH
Attention
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on
(closed)/off (open) in a short time.
Note
f The power indicator will flash slowly in green while the shutter function is in use.
Using the mute function
Audio can be temporarily turned off.
button
1) Press the button.
f The audio disappears.
2) Press the button again.
f The audio...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-53.png "Page 54
Chapter 3 Basic Operations — Operating with the remote control
54 - ENGLISH
Attention
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on
(closed)/off (open) in a short time.
Note
f The power indicator will flash slowly in green while the shutter function is in use.
Using the mute function
Audio can be temporarily turned off.
button
1) Press the button.
f The audio disappears.
2) Press the button again.
f The audio...")
Chapter 3 Basic Operations — Operating with the remote control 54 - ENGLISH Attention f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on (closed)/off (open) in a short time. Note f The power indicator will flash slowly in green while the shutter function is in use. Using the mute function Audio can be temporarily turned off. button 1) Press the button. f The audio disappears. 2) Press the button again. f The audio...
Page 55
![Page 55
Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 55
Note
f If you press the button on the control panel for at least three seconds while the on-screen display is of f (hidden), the on-screen
display is turned on.
Using the presentation timer function
The presentation timer function can be operated.
Presentations, etc. can be performed while checking the elapsed time or \
time remaining in the preset time.
button
1) Press the button.
f The count is started.
f The elapsed...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-54.png "Page 55
Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 55
Note
f If you press the button on the control panel for at least three seconds while the on-screen display is of f (hidden), the on-screen
display is turned on.
Using the presentation timer function
The presentation timer function can be operated.
Presentations, etc. can be performed while checking the elapsed time or \
time remaining in the preset time.
button
1) Press the button.
f The count is started.
f The elapsed...")
Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 55 Note f If you press the button on the control panel for at least three seconds while the on-screen display is of f (hidden), the on-screen display is turned on. Using the presentation timer function The presentation timer function can be operated. Presentations, etc. can be performed while checking the elapsed time or \ time remaining in the preset time. button 1) Press the button. f The count is started. f The elapsed...
Page 56
![Page 56
Chapter 3 Basic Operations — Operating with the remote control
56 - ENGLISH
2) Press the button again.
f The other individual adjustment screen is displayed.
When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment
screen ([UPPER LEFT]) is displayed.
Note
f After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone
distortion.
f Either setting of [KEYSTONE] or [CORNER...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-55.png "Page 56
Chapter 3 Basic Operations — Operating with the remote control
56 - ENGLISH
2) Press the button again.
f The other individual adjustment screen is displayed.
When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment
screen ([UPPER LEFT]) is displayed.
Note
f After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone
distortion.
f Either setting of [KEYSTONE] or [CORNER...")
Chapter 3 Basic Operations — Operating with the remote control 56 - ENGLISH 2) Press the button again. f The other individual adjustment screen is displayed. When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT]) is displayed. Note f After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone distortion. f Either setting of [KEYSTONE] or [CORNER...
Page 57
![Page 57
Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 57
Using the function button
[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the button on
the remote control so that it can be used as an easy shortcut button.
button
1) Press the button.
Note
f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 94).
Using the status function
You can display the status of the projector.
button...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-56.png "Page 57
Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 57
Using the function button
[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the button on
the remote control so that it can be used as an easy shortcut button.
button
1) Press the button.
Note
f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 94).
Using the status function
You can display the status of the projector.
button...")
Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 57 Using the function button [SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the button on the remote control so that it can be used as an easy shortcut button. button 1) Press the button. Note f Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 94). Using the status function You can display the status of the projector. button...
Page 58
![Page 58
58 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-57.png "Page 58
58 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.")
58 - ENGLISH Chapter 4 Settings This chapter describes the settings and adjustments you can make using t\ he on-screen menu.
Page 59
![Page 59
Chapter 4 Settings — Menu navigation
ENGLISH - 59
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the button on the remote control or control panel.
f The [MAIN MENU] screen is displayed.
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN PTEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENUENTER
2) Press as to select an...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-58.png "Page 59
Chapter 4 Settings — Menu navigation
ENGLISH - 59
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the button on the remote control or control panel.
f The [MAIN MENU] screen is displayed.
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN PTEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENUENTER
2) Press as to select an...")
Chapter 4 Settings — Menu navigation ENGLISH - 59 Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button 1) Press the button on the remote control or control panel. f The [MAIN MENU] screen is displayed. MAIN MENUPICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE DISPLAY OPTION PROJECTOR SETUP P IN PTEST PATTERN SIGNAL LIST SECURITY NETWORK MENU SELECT SUB MENUENTER 2) Press as to select an...
Page 60
![Page 60
Chapter 4 Settings — Menu navigation
60 - ENGLISH
4) Press as to select a sub-menu, and press qw or the button to change or adjust settings.
f Some items will switch in order as follows each time you press qw.
ABC
f For some items, press qw to display an individual adjustment screen with a bar scale as shown be\
low.
0CONTRAST
ADJUST
Note
f Pressing the button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjusted or used for certain signal formats...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-59.png "Page 60
Chapter 4 Settings — Menu navigation
60 - ENGLISH
4) Press as to select a sub-menu, and press qw or the button to change or adjust settings.
f Some items will switch in order as follows each time you press qw.
ABC
f For some items, press qw to display an individual adjustment screen with a bar scale as shown be\
low.
0CONTRAST
ADJUST
Note
f Pressing the button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjusted or used for certain signal formats...")
Chapter 4 Settings — Menu navigation 60 - ENGLISH 4) Press as to select a sub-menu, and press qw or the button to change or adjust settings. f Some items will switch in order as follows each time you press qw. ABC f For some items, press qw to display an individual adjustment screen with a bar scale as shown be\ low. 0CONTRAST ADJUST Note f Pressing the button while the menu screen is displayed returns to the previous menu. f Some items may not be adjusted or used for certain signal formats...