Panasonic Projector PT-EW730Z User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW730Z User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 91
2) Press qw to select [ON], and press the button.
f The [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-90.png "Page 91
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 91
2) Press qw to select [ON], and press the button.
f The [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 91 2) Press qw to select [ON], and press the button. f The [SCHEDULE] screen is displayed. 3) Select and assign program to each day of week. f Press as to select the day of week, and press qw to select a program number. f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set. How to set a program Set up to 16 commands to each program. 1) Press as to select [SCHEDULE]. 2) Press qw to select...
Page 92
![Page 92
Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
11) Press the button.
f The command is fixed and n is displayed at the left of the selected command.
f After the command is fixed, press the button to close the detailed setting screen.
12) Press asqw to select [STORE], and press the button.
Note
f If you attempt to register the setting that would make the lamp turn on for a short time during the same day , an error message will be
displayed on the screen. Set the time and command...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-91.png "Page 92
Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
11) Press the button.
f The command is fixed and n is displayed at the left of the selected command.
f After the command is fixed, press the button to close the detailed setting screen.
12) Press asqw to select [STORE], and press the button.
Note
f If you attempt to register the setting that would make the lamp turn on for a short time during the same day , an error message will be
displayed on the screen. Set the time and command...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 92 - ENGLISH 11) Press the button. f The command is fixed and n is displayed at the left of the selected command. f After the command is fixed, press the button to close the detailed setting screen. 12) Press asqw to select [STORE], and press the button. Note f If you attempt to register the setting that would make the lamp turn on for a short time during the same day , an error message will be displayed on the screen. Set the time and command...
Page 93
![Page 93
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
6) Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the control commands of an existing projector
When controlling the projector on a computer, set use of control commands on a...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-92.png "Page 93
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
6) Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the control commands of an existing projector
When controlling the projector on a computer, set use of control commands on a...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 93 6) Press qw to switch the item. f The items will switch each time you press the button. [9600] Select the proper speed. [19200] [38400] 7) Press as to select [PARITY]. 8) Press qw to switch the item. f The items will switch each time you press the button. [NONE] Select the parity condition. [EVEN] [ODD] Setting the control commands of an existing projector When controlling the projector on a computer, set use of control commands on a...
Page 94
![Page 94
Chapter 4 Settings — [PROJECTOR SETUP] menu
94 - ENGLISH
[REMOTE2 MODE]
Set the terminal.
1) Press as to select [REMOTE2 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT] The pin assignment of the terminal is used by the factory default setting of the
projector.
[USER] Used to change the setting of the terminal.
[F/W SERIES] The setting of the terminal is used for the F/W series compatibility .
f When [USER] is selected, proceed to Step...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-93.png "Page 94
Chapter 4 Settings — [PROJECTOR SETUP] menu
94 - ENGLISH
[REMOTE2 MODE]
Set the terminal.
1) Press as to select [REMOTE2 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT] The pin assignment of the terminal is used by the factory default setting of the
projector.
[USER] Used to change the setting of the terminal.
[F/W SERIES] The setting of the terminal is used for the F/W series compatibility .
f When [USER] is selected, proceed to Step...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 94 - ENGLISH [REMOTE2 MODE] Set the terminal. 1) Press as to select [REMOTE2 MODE]. 2) Press qw to switch the item. f The items will switch each time you press the button. [DEFAULT] The pin assignment of the terminal is used by the factory default setting of the projector. [USER] Used to change the setting of the terminal. [F/W SERIES] The setting of the terminal is used for the F/W series compatibility . f When [USER] is selected, proceed to Step...
Page 95
![Page 95
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 95
4) Press qw to adjust the level.
Operation AdjustmentRange of adjustment
Press w. Increases the volume on the right.
L16 - R16
Press q. Increases the volume on the left.
Setting audio output of the built-in speaker
1)
Press as to select [AUDIO SETTING].
2) Press the button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [BUILT-IN SP].
4) Press qw to switch the item.
f The items will switch each time you press the button....](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-94.png "Page 95
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 95
4) Press qw to adjust the level.
Operation AdjustmentRange of adjustment
Press w. Increases the volume on the right.
L16 - R16
Press q. Increases the volume on the left.
Setting audio output of the built-in speaker
1)
Press as to select [AUDIO SETTING].
2) Press the button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [BUILT-IN SP].
4) Press qw to switch the item.
f The items will switch each time you press the button....")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 95 4) Press qw to adjust the level. Operation AdjustmentRange of adjustment Press w. Increases the volume on the right. L16 - R16 Press q. Increases the volume on the left. Setting audio output of the built-in speaker 1) Press as to select [AUDIO SETTING]. 2) Press the button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select [BUILT-IN SP]. 4) Press qw to switch the item. f The items will switch each time you press the button....
Page 96
![Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
2) Press the button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUDIO IN 1] Audio connected to the terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 2] Audio connected to the terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 3] Audio connected to...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-95.png "Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
2) Press the button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUDIO IN 1] Audio connected to the terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 2] Audio connected to the terminal is output at projection of images from a preset input
terminal.
[AUDIO IN 3] Audio connected to...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 96 - ENGLISH 2) Press the button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select the audio input. 4) Press qw to switch the item. f The items will switch each time you press the button. [AUDIO IN 1] Audio connected to the terminal is output at projection of images from a preset input terminal. [AUDIO IN 2] Audio connected to the terminal is output at projection of images from a preset input terminal. [AUDIO IN 3] Audio connected to...
Page 97
![Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
[SIGNAL INFORMATION][MEMORY NO.]
Displays the memory number of the input signal.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[SYNC.STATE] Displays the synch polarity of the input signal.
[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE] Displays the scan type of the input signal.
[TOTAL...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-96.png "Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
[SIGNAL INFORMATION][MEMORY NO.]
Displays the memory number of the input signal.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[SYNC.STATE] Displays the synch polarity of the input signal.
[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE] Displays the scan type of the input signal.
[TOTAL...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 97 [SIGNAL INFORMATION][MEMORY NO.] Displays the memory number of the input signal. [INPUT] Displays the input terminal currently selected. [SIGNAL NAME] Displays the input signal name. [SIGNAL FREQUENCY] Displays the frequency of the input signal. [SYNC.STATE] Displays the synch polarity of the input signal. [V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal. [SCAN TYPE] Displays the scan type of the input signal. [TOTAL...
Page 98
![Page 98
Chapter 4 Settings — [PROJECTOR SETUP] menu
98 - ENGLISH
2) Press the button.
f The [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
f The [ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [APPLY], and press the button.
f The setting of the date and time will be completed.
Note
f To set the date and time automatically, the projector must be...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-97.png "Page 98
Chapter 4 Settings — [PROJECTOR SETUP] menu
98 - ENGLISH
2) Press the button.
f The [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
f The [ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [APPLY], and press the button.
f The setting of the date and time will be completed.
Note
f To set the date and time automatically, the projector must be...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 98 - ENGLISH 2) Press the button. f The [DATE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK]. 4) Press the button. f The [ADJUST CLOCK] screen is displayed. 5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON]. 6) Press as to select [APPLY], and press the button. f The setting of the date and time will be completed. Note f To set the date and time automatically, the projector must be...
Page 99
![Page 99
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 99
[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered signal” (
x page 104).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the button.
6) When the confirmation screen is displayed, press qw to select [OK],...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-98.png "Page 99
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 99
[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered signal” (
x page 104).
[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the button.
6) When the confirmation screen is displayed, press qw to select [OK],...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 99 [REGISTERED SIGNAL]Deletes all the setting values saved for each input signal. To delete only a part of a registered signal, perform the procedure described in “Deleting the registered signal” ( x page 104). [NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings. [LOGO IMAGE] Deletes the image registered in [USER LOGO]. 5) Press the button. 6) When the confirmation screen is displayed, press qw to select [OK],...
Page 100
![Page 100
Chapter 4 Settings — [P IN P] menu
100 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f After selecting the item, press asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P MODE].
2) Press the button.
f The [P IN P MODE] screen is...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-99.png "Page 100
Chapter 4 Settings — [P IN P] menu
100 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f After selecting the item, press asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P MODE].
2) Press the button.
f The [P IN P MODE] screen is...")
Chapter 4 Settings — [P IN P] menu 100 - ENGLISH [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. Using P IN P function Locate a separate, small sub screen in the main screen to project two im\ ages simultaneously. 1) Press as to select [P IN P MODE]. 2) Press the button. f The [P IN P MODE] screen is...