Panasonic Projector PT-EW730Z User Manual

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 111
4) Press as to select [STORE], and press the  button.
5)  When the confirmation screen is displayed, press  qw to select [OK], and press the  button.
Note
 
f When using a DHCP server, confirm that the DHCP server is running.
 
f Consult your network administrator regarding the IP address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1)  Press as to select [NETWORK CONTROL].
2)  Press the  button.
 
f The...

Chapter 4 Settings — [NETWORK] menu
112 - ENGLISH
 
f RoomView Server Edition
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
 
f “Crestron ConnectedTM” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems 
connected to a network using a computer.
 
f For details of “Crestron Connected
TM”, refer to the website of Crestron Electronics, Inc. (English only)
URL...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 113
 
f For the LAN cable between a twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 
g Compatible with CAT5e or higher
 
g Shielded type (including connectors)
 
g Straight-through
 
g Single wire
 
f The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance is 
exceeded, image and sound may be disrupted and may cause a...

Chapter 4 Settings — [NETWORK] menu
114 - ENGLISH
 
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 
f Change the password first. ( x page 123)
 
f The administrator rights allow use of all functions. The user rights allow use of only the following functions: [Projector status] ( x page 114), 
viewing of the error information page ( x page 115), [Network status] (x page 116), [Access error] (x page...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 115
13 [AROUND LAMP TEMPERATURE]
Displays the status of the temperature around the lamp of the 
projector.
14  [LAMP RUNTIME]
Displays the runtime of the lamps (converted value). 15 
[SELF TEST]
Displays the self-diagnosis information.
16  [PROJECTOR RUNTIME]
Displays the runtime of the projector.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the  [Projector status] screen, click it to display...

Chapter 4 Settings — [NETWORK] menu
116 - ENGLISH
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
[Access error] page
Click [Status] → [Access error].
The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or 
passwords.
[Mail error] page
Click [Status] → [Mail error].
Display E-mail error information if failed to send periodic E-mails.
Note
 
f [Access error] and [Mail...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 117
[Basic control] page
Click [Projector control] → [Basic control].
1
2
4
5
3
6
1 [INPUT]
Switches the input signal.
2  [VOLUME]
Adjusts the volume.
3  [PICTURE MODE]
Switches the picture mode. 4 
[SHUTTER]
Switches the setting whether to use the shutter function 
(closing/opening of the shutter).
5  [POWER]
Turns on/off the power.
6  [CLOSED CAPTION]
Switches the closed caption setting.
[Advanced control] page
Click [Projector control]  → [Advanced...

Chapter 4 Settings — [NETWORK] menu
118 - ENGLISH
[Network config] page
Click [Detailed set up] → [Network config].
 
f Click [Network config] to display the  [CAUTION!] screen.
 
f Click the [Next] button to display the current settings.
 
f Click the [Change] button to display the setting change screen.
1
2
3
4
5
6
7
8
1  [PROJECTOR NAME]
Enter the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2  [DHCP ON], [DHCP OFF]
To enable the DHCP client function, set...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 119
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Timezone]
Selects the time zone.
2  [Set time zone]
Updates the time zone setting.
3  [NTP SYNCHRONIZATION]
Sets to [ON] to adjust the date and time automatically.
4  [NTP SERVER NAME]
Enter the IP address or server name of the NTP server when 
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.) 5 
[Date]
Enter the date...

Chapter 4 Settings — [NETWORK] menu
120 - ENGLISH
[E-mail set up] page
When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two 
addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2  [SMTP SERVER NAME]
Enter the IP address or the server name of the E-mail server 
(SMTP). To enter the server name, the DNS server needs to be 
set up.
3  [MAIL FROM]
Enter the E-mail...