Panasonic Projector PT-EW730Z User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW730Z User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Chapter 4 Settings — [P IN P] menu
ENGLISH - 101
14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.
15) Press as to select [FRAME LOCK].
16) Press qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
17) Press as to select [TYPE].
18) Press qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority....](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-100.png "Page 101
Chapter 4 Settings — [P IN P] menu
ENGLISH - 101
14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.
15) Press as to select [FRAME LOCK].
16) Press qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
17) Press as to select [TYPE].
18) Press qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority....")
Chapter 4 Settings — [P IN P] menu ENGLISH - 101 14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment. 15) Press as to select [FRAME LOCK]. 16) Press qw to switch the item. [MAIN WINDOW] Set frame lock to the input signal set in the main window. [SUB WINDOW] Set frame lock to the input signal set in the sub window. 17) Press as to select [TYPE]. 18) Press qw to switch the item. [MAIN WINDOW] The main window has display priority. [SUB WINDOW] The sub window has display priority....
Page 102
![Page 102
Chapter 4 Settings — [TEST PATTERN] menu
102 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f Press qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch the...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-101.png "Page 102
Chapter 4 Settings — [TEST PATTERN] menu
102 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f Press qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch the...")
Chapter 4 Settings — [TEST PATTERN] menu 102 - ENGLISH [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f Press qw to switch. [TEST PATTERN] Display the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments. 1) Press qw to switch the...
Page 103
![Page 103
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 103
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
r Registered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
f A name can be set for each sub memory ( x page 105).
Registering new signals
After a new signal is input and the button on the remote control...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-102.png "Page 103
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 103
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
r Registered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
f A name can be set for each sub memory ( x page 105).
Registering new signals
After a new signal is input and the button on the remote control...")
Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 103 [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. r Registered signal details A1 (1-2) When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number Memory number: f A name can be set for each sub memory ( x page 105). Registering new signals After a new signal is input and the button on the remote control...
Page 104
![Page 104
Chapter 4 Settings — [SIGNAL LIST] menu
104 - ENGLISH
3) Press the button.
f The [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[NARROW] Select in most cases.
[WIDE] Widens the lock-in range.
Note
f Switch the range that determines that a signal to be input is the same signal that is already registered.
f To prioritize the determination that it is the same signal that...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-103.png "Page 104
Chapter 4 Settings — [SIGNAL LIST] menu
104 - ENGLISH
3) Press the button.
f The [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[NARROW] Select in most cases.
[WIDE] Widens the lock-in range.
Note
f Switch the range that determines that a signal to be input is the same signal that is already registered.
f To prioritize the determination that it is the same signal that...")
Chapter 4 Settings — [SIGNAL LIST] menu 104 - ENGLISH 3) Press the button. f The [REGISTERED SIGNAL SETUP] screen is displayed. 4) Press as to select [LOCK-IN RANGE]. 5) Press qw to switch the item. f The items will switch each time you press the button. [NARROW] Select in most cases. [WIDE] Widens the lock-in range. Note f Switch the range that determines that a signal to be input is the same signal that is already registered. f To prioritize the determination that it is the same signal that...
Page 105
![Page 105
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 105
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same
synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l,...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-104.png "Page 105
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 105
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same
synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l,...")
Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 105 Sub memory The projector has a sub memory function that can register the multiple i\ mage adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\ l,...
Page 106
![Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the button.
f After selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] menu and press the button, entering a...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-105.png "Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the button.
f After selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] menu and press the button, entering a...")
Chapter 4 Settings — [SECURITY] menu 106 - ENGLISH [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. f After selecting the item, press asqw to set. Attention f When you select the [SECURITY] menu and press the button, entering a...
Page 107
![Page 107
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 107
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-106.png "Page 107
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 107
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied...")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 107 [DISPLAY SETTING] Overlap the security message (text or image) over the projecting image. 1) Press as to select [DISPLAY SETTING]. 2) Press qw to switch the item. f The items will switch each time you press the button. [OFF] The text display is disabled. [TEXT] The text display is enabled. [USER LOGO] Displays the image registered by the user. Note f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied...
Page 108
![Page 108
Chapter 4 Settings — [SECURITY] menu
108 - ENGLISH
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROL] You can set the limitation on the control from the remote control.
4)...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-107.png "Page 108
Chapter 4 Settings — [SECURITY] menu
108 - ENGLISH
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROL] You can set the limitation on the control from the remote control.
4)...")
Chapter 4 Settings — [SECURITY] menu 108 - ENGLISH [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. 1) Press as to select [CONTROL DEVICE SETUP]. 2) Press the button. f The [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL]. [CONTROL PANEL] You can set the limitation on the control from the control panel. [REMOTE CONTROL] You can set the limitation on the control from the remote control. 4)...
Page 109
![Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
f The items will switch each time you press...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-108.png "Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
f The items will switch each time you press...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 109 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. f After selecting the item, press asqw to set. [DIGITAL LINK MODE] Switch the communication method of the terminal of the projector. 1) Press as to select [DIGITAL LINK MODE]. 2) Press qw to switch the item. f The items will switch each time you press...
Page 110
![Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
7) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
f The projector does not support 10BaseT Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2) Press the button.
f The [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(DIGITAL LINK)].
4) Press qw to switch the communication method.
f The items will...](http://img.usermanuals.tech/thumb/58/99444/w300_projector_manual_7956_d-109.png "Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
7) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
f The projector does not support 10BaseT Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2) Press the button.
f The [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(DIGITAL LINK)].
4) Press qw to switch the communication method.
f The items will...")
Chapter 4 Settings — [NETWORK] menu 110 - ENGLISH 7) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note f The projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable transmitter 1) Press as to select [DIGITAL LINK SETUP]. 2) Press the button. f The [DIGITAL LINK SETUP] screen is displayed. 3) Press as to select [DUPLEX(DIGITAL LINK)]. 4) Press qw to switch the communication method. f The items will...