Panasonic Projector Pt Dw730ul Operating Instructions
Here you can view all the pages of manual Panasonic Projector Pt Dw730ul Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
[NETWORK] menu
ENGLISH - 81
Settings
■ [Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
[Ping test].
(1)
(2)
(3)
(4) (1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit] Executes the connection test.
(3) Example of display when the connection has succeeded
(4) Example of display when the connection has failed](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-80.png "Page 81
[NETWORK] menu
ENGLISH - 81
Settings
■ [Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
[Ping test].
(1)
(2)
(3)
(4) (1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit] Executes the connection test.
(3) Example of display when the connection has succeeded
(4) Example of display when the connection has failed")
[NETWORK] menu ENGLISH - 81 Settings ■ [Ping test] page You can check whether the network is connected to the E-mail server, POP server, DNS server, etc. Click [Detailed set up] [Ping test]. (1) (2) (3) (4) (1) [Input IP address] Enter the IP address of the server to be tested. (2) [Submit] Executes the connection test. (3) Example of display when the connection has succeeded (4) Example of display when the connection has failed
Page 82
![Page 82
[NETWORK] menu
82 - ENGLISH
Settings
■ [E-mail set up] page
An E-mail message can be sent to the E-mail address setup in advance (u\
p to two addresses) when
the problem occurred or the usage time of the lamp reached the specified value.
Click [Detailed set up]
[E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7) (1) [ENABLE]
Select [ENABLE] when using the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the
E-mail server (SMTP). To enter the server name, the setup...](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-81.png "Page 82
[NETWORK] menu
82 - ENGLISH
Settings
■ [E-mail set up] page
An E-mail message can be sent to the E-mail address setup in advance (u\
p to two addresses) when
the problem occurred or the usage time of the lamp reached the specified value.
Click [Detailed set up]
[E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7) (1) [ENABLE]
Select [ENABLE] when using the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the
E-mail server (SMTP). To enter the server name, the setup...")
[NETWORK] menu 82 - ENGLISH Settings ■ [E-mail set up] page An E-mail message can be sent to the E-mail address setup in advance (u\ p to two addresses) when the problem occurred or the usage time of the lamp reached the specified value. Click [Detailed set up] [E-mail set up]. (1) (2) (3) (4) (5) (6) (7) (1) [ENABLE] Select [ENABLE] when using the E-mail function. (2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail server (SMTP). To enter the server name, the setup...
Page 83
![Page 83
[NETWORK] menu
ENGLISH - 83
Settings
■ [E-mail set up] page (continued)
(1)
(2)
(3)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error
occurred in the self-diagn osis....](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-82.png "Page 83
[NETWORK] menu
ENGLISH - 83
Settings
■ [E-mail set up] page (continued)
(1)
(2)
(3)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error
occurred in the self-diagn osis....")
[NETWORK] menu ENGLISH - 83 Settings ■ [E-mail set up] page (continued) (1) (2) (3) (1) [E-MAIL ADDRESS 2] Enter the E-mail address to be sent when two E-mail addresses are to be used. Leave it blank when two E-mail addresses are not to be used. (2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail address. [MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE]. [ERROR]: An E-mail message is sent when an error occurred in the self-diagn osis....
Page 84
![Page 84
[NETWORK] menu
84 - ENGLISH
Settings
■ [Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send
an E-mail message.
Click [Detailed set up]
[Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)(1) [Auth]
Select the authentication method specified by your
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [Pop Server name] Enter the POP server name.
Allowed characters:...](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-83.png "Page 84
[NETWORK] menu
84 - ENGLISH
Settings
■ [Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send
an E-mail message.
Click [Detailed set up]
[Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)(1) [Auth]
Select the authentication method specified by your
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [Pop Server name] Enter the POP server name.
Allowed characters:...")
[NETWORK] menu 84 - ENGLISH Settings ■ [Authentication set up] page You can set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail message. Click [Detailed set up] [Authentication set up]. (1) (2) (3) (4) (5) (6) (7) (8)(1) [Auth] Select the authentication method specified by your Internet service provider. (2) [SMTP Auth] Set when the SMTP authentication is selected. (3) [Pop Server name] Enter the POP server name. Allowed characters:...
Page 85
![Page 85
[NETWORK] menu
ENGLISH - 85
Settings
■ Contents of mail sent
z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
z
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-84.png "Page 85
[NETWORK] menu
ENGLISH - 85
Settings
■ Contents of mail sent
z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
z
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.")
[NETWORK] menu ENGLISH - 85 Settings ■ Contents of mail sent z Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. z Example of the E-mail sent for an error The following E-mail is sent when an error has occurred.
Page 86
![Page 86
[NETWORK] menu
86 - ENGLISH
Settings
■ [Change password] page
Click [Change password].
(1)
(2)
(3) (1) [Administrator]
Select this when you change the [Administrator] setting.
(2) [User] Select this when the [User] setting.
(3) [Next] Displays the screen to change the password setting.
z
[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7) (1) [Account]
Displays the account to change.
(2) [Current setting] [User name] Enter the user name before the change.
(3) [Current setting] [Password] Enter...](http://img.usermanuals.tech/thumb/58/94257/w300_panasonic-pt-dw730uls-manual_d-85.png "Page 86
[NETWORK] menu
86 - ENGLISH
Settings
■ [Change password] page
Click [Change password].
(1)
(2)
(3) (1) [Administrator]
Select this when you change the [Administrator] setting.
(2) [User] Select this when the [User] setting.
(3) [Next] Displays the screen to change the password setting.
z
[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7) (1) [Account]
Displays the account to change.
(2) [Current setting] [User name] Enter the user name before the change.
(3) [Current setting] [Password] Enter...")
[NETWORK] menu 86 - ENGLISH Settings ■ [Change password] page Click [Change password]. (1) (2) (3) (1) [Administrator] Select this when you change the [Administrator] setting. (2) [User] Select this when the [User] setting. (3) [Next] Displays the screen to change the password setting. z [Administrator] account (1) (2) (3) (4) (5) (6) (7) (1) [Account] Displays the account to change. (2) [Current setting] [User name] Enter the user name before the change. (3) [Current setting] [Password] Enter...
Page 87
LAMP/TEMP/FILTER Indicators ENGLISH - 87 Maintenance LAMP/TEMP/FILTER Indicators Managing the indicated problems If a problem should occur inside the projector, the lamp indicators /, the temperature indicator , and the filter indicator will inform you. Manage the indicated problems as follow. Attention z Before you take a remedial measure, follow the procedure of switching the power off indicated in “Powering off the projector” ( page 35). z C heck the power status with the power indicator...
Page 88
LAMP/TEMP/FILTER Indicators 88 - ENGLISH Maintenance ■ Temperature indicator Lamp indication Lighting in red Blinking in red (once) Blinking in red (3 times) Status Warm-up status Internal temperature is high. (WARNING) Internal temperature is high. (Standby condition) The cooling fan has been stopped. Points to be checked z Did you turn on the power when the ambient temperature was lower than approx. 0° C (32 ° F)? z Is the ventilating port (intake/exhaust) blocked? z Is the room...
Page 89
Maintenance/Replacement ENGLISH - 89 Maintenance Maintenance/Replacement Before maintaining/replacing the unit z Make sure to turn off the power before maintaining or replacing the unit. ¢ pages 32, 35) z When turning off the power, make sure to follow the procedures in “Powering off the projector” ( page 35). Maintenance ■ Outer case Wipe off dirt and dust with a soft, dry cloth. z If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the...
Page 90
Maintenance/Replacement 90 - ENGLISH Maintenance 4) Attach the air filter unit to the projector. z The air filter unit has vertical distinctions. (Check the direction of the allow 0ö0ñ.) z Perform Step 2) in the reverse order. 5) Attach the air filter cover to the projector and use a Phillips screwdriver to tighten the air filter cover screw. z Perform Step 1) in the reverse order. Attention z After washing the air filter unit, dry it thoroughly before attaching it back to the...