Panasonic Projector Pt Dw730ul Operating Instructions

Menu Navigation 
ENGLISH - 41
Settings
Menu Navigation 
Navigating through the menu 
 
■ Operating procedure
 button
1)  Press the  button on the 
remote control or the control panel. 
 
z
The [MAIN MENU] screen is displayed. 
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT SUB MENU
2)  Press  to select the main menu item. 
 
z
The selected item is highlighted in yellow . 
ENTER
MAIN MENU
PICTURE...

Menu Navigation 
42 - ENGLISH
Settings
Note 
z
You cannot reset all the settings to the factory 
default at a time. 
 
z
To reset all the settings adjusted in the sub-menu 
item to the factory default at a time, perform 
initialization from the [PROJECTOR SETUP] menu 

 [INITIALIZE] ( page 66). 
 
z
Some menu items cannot be reset by pressing the 
 button. Adjust each item manually. 
 
z
The triangular mark under the bar scale in the 
individual adjustment screen indicates the factory 
default setting....

Menu Navigation 
ENGLISH - 43
Settings
 
■ [DISPLAY LANGUAGE]
Details ( page 54)
 
■ [DISPLAY OPTION]
Sub-menu itemFactory defaultPage
[COLOR MATCHING] [OFF]55
[COLOR CORRECTION] [OFF] 56
[CONTRAST MODE] [DEFAULT] 56
[SCREEN SETTING] •57
[AUTO SIGNAL] [OFF]57
[AUTO SETUP] •57
[DVI-D IN] •58
[ON-SCREEN DISPLAY] •58
[BACK COLOR] [BLUE]59
[STARTUP LOGO] [DEFAULT 
LOGO] 60
[FREEZE] •60
[SIDE BY SIDE]
*1• 60
*1:  Only for PT-DW730U. 
 
■ [PROJECTOR SETUP]
Sub-menu itemFactory defaultPage
[PROJECTOR ID]...

[PICTURE] menu 
44 - ENGLISH
Settings
Select [PICTURE] from the main menu, and 
select the item from the sub-menu. 
Refer to “
Navigating through the menu ”
 
(
 page 41) regarding the operation of the menu 
screen.   
z
After selecting the item, press ÛÝ/¢/£ to set. 
[PICTURE MODE]
You can switch to the desired picture mode suitable 
for the image source and the environment in which 
the projector is used. 
1)  Press ▲▼ to select [PICTURE MODE].
2)  Press ◀▶ or press the  
button.
 
z
The [PICTURE...

[PICTURE] menu 
ENGLISH - 45
Settings
[COLOR]
You can adjust the color saturation of the projected 
image. 
1)  Press ▲▼ to select [COLOR]. 
2)  Press ◀▶ or the  button. 
 
z
The [COLOR] individual adjustment screen is 
displayed. 
3)  Press ◀▶ to adjust the level. 
Operation Adjustment Adjustment 
range
Press /£ .  Deepens colors.  Maximum 
value +31 
Press /¢ .  Weakens colors.  Minimum 
value -31 
[TINT]
You can adjust the skin tone in the projected image. 
1)  Press ▲▼ to select [TINT]. 
2)  Press ◀▶...

[PICTURE] menu 
46 - ENGLISH
Settings
[WHITE GAIN]
You can adjust the brightness of the white part of the 
projected image. 
1)  Press ▲▼ to select [WHITE GAIN]. 
2)  Press ◀▶ or the  button. 
 
z
The [WHITE GAIN] individual adjustment 
screen is displayed. 
3)  Press ◀▶ to adjust the level. 
Operation Adjustment Adjustment 
range
Press /£ . Increases the 
brightness of white.  Maximum 
value +10 
Press /¢ . Makes image 
natural.  Minimum 
value 0 
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the...

[PICTURE] menu 
ENGLISH - 47
Settings
[AI]
You can project the optimal image with contrast 
by controlling the gradation in accordance with the 
image.
1)  Press ▲▼ to select [AI]. 
2)  Press ◀▶ or the  button.
 
z
The [AI] individual adjustment screen is 
displayed.
3)  Press ◀▶ to switch [AI]. 
 
z
The setting will change as follows each time 
you press the button. 
[ON][OFF]
[ON] AI correction is enabled. 
[OFF] AI correction is disabled. 
[SYSTEM SELECTOR]
The projector will automatically detect the...

[POSITION] menu
48 - ENGLISH
Settings
Select [POSITION] from the main menu, and 
select the item from the sub-menu. 
Refer to “
Navigating through the menu ”
 
(
 page 41) regarding the operation of the menu 
screen.   
z
After selecting the item, press ÛÝ/¢/£ to set. 
[SHIFT]
You can move the image position vertically or 
horizontally if the image position projected on the 
screen is shifted even  when the relative position of the 
projector and the screen is installed correctly. 
1)  Press ▲▼ to...

[POSITION] menu
ENGLISH - 49
Settings
 
■ [16 : 9]
When standard signals*1 are input, the pictures are 
displayed with the aspect ratio converted to 16:9. 
When wide-screen signals
*2 are input, the pictures are 
displayed without changing the aspect ratio.
 
■ [4 : 3]
When standard signals*1 are input, the pictures are 
displayed without changing the aspect ratio. When 
wide-screen signals
*2 are input and [4:3] is selected 
with [SCREEN FORMAT], the aspect ratio is changed 
to 4:3. If [4:3] is not...

[POSITION] menu
50 - ENGLISH
Settings
[CLOCK PHASE]
You can adjust to achieve an optimal image when 
there is a flickering image or smeared outlines. 
1)  Press ▲▼ to select [CLOCK PHASE]. 
2)  Press ◀▶ or the  button. 
 
z
The [CLOCK PHASE] individual adjustment 
screen is displayed. 
3)  Press ◀▶ to adjust the level. 
 
z
Adjustment value will change between [0] and 
[31]. Adjust so that the amount of interference is 
at a minimum. 
Note  
z
Optim al value may not be achieved if the output 
f

rom the...