Panasonic Projector PT-DS20KU User Manual
Have a look at the manual Panasonic Projector PT-DS20KU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 136
[NETWORK] menu
136 - ENGLISH
Settings
▶■[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(5) (3)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER] Switches between use or not use of the shutter
function.
(3) [OSD] Switches between on (display)/off (no display) of the
on-screen display function.
(4) [SYSTEM] Switches the system method.
(5) [INPUT SELECT] Switches the input signal.
▶■[Detail control] page
Click [Projector control] → [Detail control].
(7)
(8)
(9)
(10)
(2)...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-135.png "Page 136
[NETWORK] menu
136 - ENGLISH
Settings
▶■[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(5) (3)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER] Switches between use or not use of the shutter
function.
(3) [OSD] Switches between on (display)/off (no display) of the
on-screen display function.
(4) [SYSTEM] Switches the system method.
(5) [INPUT SELECT] Switches the input signal.
▶■[Detail control] page
Click [Projector control] → [Detail control].
(7)
(8)
(9)
(10)
(2)...")
![Page 137
[NETWORK] menu
ENGLISH - 137
Settings
▶■[Network config] page
Click [Detailed set up] → [Network config].
▶z
Click [Network config] to display the [CAUTION!] screen.
▶zClick [Next] to display the current settings.
▶zClick [Change] to display the following setting change screen.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF] To enable the DHCP client function, set to...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-136.png "Page 137
[NETWORK] menu
ENGLISH - 137
Settings
▶■[Network config] page
Click [Detailed set up] → [Network config].
▶z
Click [Network config] to display the [CAUTION!] screen.
▶zClick [Next] to display the current settings.
▶zClick [Change] to display the following setting change screen.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF] To enable the DHCP client function, set to...")
![Page 138
[NETWORK] menu
138 - ENGLISH
Settings
▶■[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Time Zone]
Selects the time zone.
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP
server when you set to adjust the date and time
manually.
(To enter the server name, the setup of the DNS
server is required.)
(5)...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-137.png "Page 138
[NETWORK] menu
138 - ENGLISH
Settings
▶■[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Time Zone]
Selects the time zone.
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP
server when you set to adjust the date and time
manually.
(To enter the server name, the setup of the DNS
server is required.)
(5)...")
![Page 139
[NETWORK] menu
ENGLISH - 139
Settings
▶■[E-mail set up] page
E-mail address set in advance for use when there is a problem or when the usage time of a lamp reaches a
set value.
E-mail can be sent to (maximum two locations).
Click [Detailed set up] → [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [Enable] to use the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail
server (SMTP). To enter the server name, the DNS
server settings are required....](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-138.png "Page 139
[NETWORK] menu
ENGLISH - 139
Settings
▶■[E-mail set up] page
E-mail address set in advance for use when there is a problem or when the usage time of a lamp reaches a
set value.
E-mail can be sent to (maximum two locations).
Click [Detailed set up] → [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [Enable] to use the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail
server (SMTP). To enter the server name, the DNS
server settings are required....")
![Page 140
[NETWORK] menu
140 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error
occurred in the self-diagnosis.
[LAMP1...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-139.png "Page 140
[NETWORK] menu
140 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error
occurred in the self-diagnosis.
[LAMP1...")
![Page 141
[NETWORK] menu
ENGLISH - 141
Settings
▶■[Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send
an E-mail message.
Click [Detailed set up] → [Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [Auth] Select the authentication method specified by your
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [POP server name] Enter the POP server name. (Up to 63 characters in
single...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-140.png "Page 141
[NETWORK] menu
ENGLISH - 141
Settings
▶■[Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send
an E-mail message.
Click [Detailed set up] → [Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [Auth] Select the authentication method specified by your
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [POP server name] Enter the POP server name. (Up to 63 characters in
single...")
![Page 142
[NETWORK] menu
142 - ENGLISH
Settings
▶■Contents of mail sent
▶z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-141.png "Page 142
[NETWORK] menu
142 - ENGLISH
Settings
▶■Contents of mail sent
▶z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.")
![Page 143
[NETWORK] menu
ENGLISH - 143
Settings
▶zExample of the E-mail sent for an error
The following E-mail is sent when an error has occurred.](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-142.png "Page 143
[NETWORK] menu
ENGLISH - 143
Settings
▶zExample of the E-mail sent for an error
The following E-mail is sent when an error has occurred.")
![Page 144
[NETWORK] menu
144 - ENGLISH
Settings
▶■User name [Change password] page
Click [Change password].
(1)
(2)
(3)
(1) [Administrator]
Used to change the setting of the [Administrator].
(2) [User] Used to change the setting of the [User].
(3) [Next] Used to change the setting of the password.
▶z[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Account]
Displays the account to change.
(2) [Current][User name] Enter the user name before the change.
(3) [Current][Password] Enter the current password.
(4)...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-143.png "Page 144
[NETWORK] menu
144 - ENGLISH
Settings
▶■User name [Change password] page
Click [Change password].
(1)
(2)
(3)
(1) [Administrator]
Used to change the setting of the [Administrator].
(2) [User] Used to change the setting of the [User].
(3) [Next] Used to change the setting of the password.
▶z[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Account]
Displays the account to change.
(2) [Current][User name] Enter the user name before the change.
(3) [Current][Password] Enter the current password.
(4)...")
![Page 145
[NETWORK] menu
ENGLISH - 145
Settings
▶z[User] account
(1)
(2)
(3)
(5) (4)
(1) [Account]
Displays the account to change.
(2) [New][User name] Enter the desired new user name. (Up to 16
characters in single byte)
(3) [New][Password] Enter the desired new password. (Up to 16 characters
in single byte)
(4) [New][Password(Retype)] Enter the desired new password again.
(5) [OK] Determines the change of password.
▶z[Change password] (For user rights)
Only the change of password is enabled under the user...](http://img.usermanuals.tech/thumb/58/98929/w64_projector_manual_6942_d-144.png "Page 145
[NETWORK] menu
ENGLISH - 145
Settings
▶z[User] account
(1)
(2)
(3)
(5) (4)
(1) [Account]
Displays the account to change.
(2) [New][User name] Enter the desired new user name. (Up to 16
characters in single byte)
(3) [New][Password] Enter the desired new password. (Up to 16 characters
in single byte)
(4) [New][Password(Retype)] Enter the desired new password again.
(5) [OK] Determines the change of password.
▶z[Change password] (For user rights)
Only the change of password is enabled under the user...")
[NETWORK] menu ENGLISH - 141 Settings ▶■[Authentication set up] page You can set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail message. Click [Detailed set up] → [Authentication set up]. (1) (2) (3) (4) (5) (6) (7) (8) (1) [Auth] Select the authentication method specified by your Internet service provider. (2) [SMTP Auth] Set when the SMTP authentication is selected. (3) [POP server name] Enter the POP server name. (Up to 63 characters in single byte) Allowed characters: Alphanumerics (A to Z, a to z, 0 to 9) Minus sign (-) and period (.) (4) [User name] Enter the user name for the POP server or the SMTP server. (Up to 63 characters in single byte) (5) [Password] Enter the password for the POP server or the SMTP server. (Up to 63 characters in single byte) (6) [SMTP server port] Enter the port number of the SMTP server. (Normally 25) (7) [POP server port] Enter the port number of the POP server. (Normally 110) (8) [Submit] Update the settings.
[NETWORK] menu 142 - ENGLISH Settings ▶■Contents of mail sent ▶z Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established.
[NETWORK] menu ENGLISH - 143 Settings ▶zExample of the E-mail sent for an error The following E-mail is sent when an error has occurred.
[NETWORK] menu 144 - ENGLISH Settings ▶■User name [Change password] page Click [Change password]. (1) (2) (3) (1) [Administrator] Used to change the setting of the [Administrator]. (2) [User] Used to change the setting of the [User]. (3) [Next] Used to change the setting of the password. ▶z[Administrator] account (1) (2) (3) (4) (5) (6) (7) (1) [Account] Displays the account to change. (2) [Current][User name] Enter the user name before the change. (3) [Current][Password] Enter the current password. (4) [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) (5) [New][Password] Enter the desired new password. (Up to 16 characters in single byte) (6) [New][Password(Retype)] Enter the desired new password again. (7) [OK] Determines the change of password.
[NETWORK] menu ENGLISH - 145 Settings ▶z[User] account (1) (2) (3) (5) (4) (1) [Account] Displays the account to change. (2) [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) (3) [New][Password] Enter the desired new password. (Up to 16 characters in single byte) (4) [New][Password(Retype)] Enter the desired new password again. (5) [OK] Determines the change of password. ▶z[Change password] (For user rights) Only the change of password is enabled under the user rights. (1) (2) (4) (3) (1) [Old Password] Enter the current password. (2) [New Password] Enter the desired new password. (Up to 16 characters in single byte) (3) [Retype] Enter the desired new password again. (4) [OK] Determines the change of password. Note zT o change the account of the administrator, you must enter the [Current] [User name] and [Password].
Lamp/Temperature/Filter Indicators 146 - ENGLISH Maintenance Lamp/Temperature/Filter Indicators Managing the indicated problems If a problem should occur inside the projector, the lamp indicators ///, the temperature indicator , and the filter indicator will inform you by lighting or flashing. Check the status of the indicators and manage the indicated problems as follows.Attention z When switching of f the power to deal with problems, make sure to follow the procedure in “Switching of f the projector” ( page 53). Note z Check the status of the power supply with the power indicator . ( page 51) /DPSLQGLFDWRU /$03! 3RZHULQGLFDWRU 21 * 67$1%
Lamp/Temperature/Filter Indicators ENGLISH - 147 Maintenance ▶■Temperature indicator Indicator status Lighting in red Flashing in red (2 times) Flashing in red (3 times) Status Warm-up status Internal temperature is high. (WARNING)Internal temperature is high (standby mode) The cooling fan has stopped. Cause z Did you turn on the power when the room temperature was about 0°C (32°F)? zIs the air intake/exhaust port blocked? zIs the room temperature high? zIs the filter indicator not lit? ― Solution zW ait at least five minutes in the current status. z Install the unit in a location with an ambient temperature of 0°C (32°F) to 45°C (1 13°F) *1. zRemove any objects that are blocking the air intake/exhaust port. zMove the projector to a location with an ambient temperature of 0°C (32°F) to 45°C (1 13°F) *1 and a humidity of 20% to 80% (no condensation). z C lean the air filter unit or replace it. ( page 148) z T urn the switch to ( page 53), and consult your dealer. *1: When using the projector at high elevations (1 400 m (4 593 ft) – 2 700 m (8 858 ft) above sea level), the operating environment temperature will be 5°C (41°F) lower than the maximum limit. The upper limit of the operating environment temperature will be reduced by a further 5°C (41°F) when using the replacement lamp unit (for portrait mode). When using a smoke cut filter, the temperature will be 0°C (32°F) to 35°C (95°F). However, it cannot be used at high elevations. Note z If the temperature indicator is still illuminating or flashing after taking the measures, ask your dealer for repair . ▶■Filter indicator Indicator status Lighting in red Flashing in red Status The filter is clogged. The temperature inside or outside the projector is abnormally high. The air filter unit is not attached. Cause z Is the air filter unit dirty? zIs the air intake/ exhaust port blocked? zIs [HIGH ALTITUDE MODE] set correctly? z Is the air filter unit attached? Solution z Clean the air filter unit or replace it. ( page 148) zRemove any objects that are blocking the air intake/exhaust port. zWhen using the projector at high elevations 1 400 m (4 593 ft) – 2 700 m (8 858 ft) sea level, set [HIGH ALTITUDE MODE] ( page 103) to [ON]. z Do not use the projector at high elevations 2 700 m (8 858 ft) or higher above sea level. z Attach the air filter unit. Note z If the filter indicator is still illuminating or flashing after taking the measures, ask your dealer for repair. z [ LAMP SELECT] may be set to [DUAL] when the filter clogged even when the [LAMP SELECT] is set to [QUAD] or [TRIPLE]. Cleaning the air filter unit or replacing it with a new one will turn of f the indicator.
Maintenance/replacement 148 - ENGLISH Maintenance Maintenance/replacement Before maintaining/replacing the unit zMake sure to turn of f the power before maintaining or replacing the unit. ( pages 50, 53) zW hen switching off the projector, make sure to follow the procedures in “Switching off the projector” ( page 53). Maintenance ▶■ Outer case Wipe off dirt and dust with a soft, dry cloth. ▶z If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry of f the projector with a dry cloth. ▶z Do not use benzene, thinner , or rubbing alcohol, other solvents, or household cleaners. Doing so may deteriorate the outer case and peel off the paint. ▶z When using chemically treated dust cloths, follow the instructions written on its packaging. ▶■ Lens If dirt or dust accumulates on the surface of the lens, it will be enlarged and projected onto the screen. Wipe off dirt and dust from the front surface of the lens with a soft clean cloth. ▶z Do not use a cloth that is fluf fy, dusty, or soaked with oil/water. ▶zSince the lens is fragile, do not use excessive force when wiping the lens. Attention z The lens is made of glass. Impacts or excessive force when wiping may scratch its surface. Please handle with care. ▶■ Air filter unit Perform maintenance of the air filter unit in the following cases. ▶z The air filter is clogged with dust, causing the filter replacement message to appear on the screen and the filter indicator to light in red. 1) Remove the air filter cover . ▶zUse a Phillips screwdriver to turn the air filter cover screw counterclockwise until it turns freely , and then remove the air filter cover . Air filter cover f\ ixing screw Air filter cover 2) Pull out the air filter unit. ▶zRemove the air filter unit frame at the front side (with the lens) from the tab of the projector body while slightly pressing the center and pull out in the direction of the arrow , and then remove the frame at the opposite side from the tab. ▶z After pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port of the projector body if there are any . Tabs on the projector body Tabs on the projector body Air filter unit com\’partment and the projector’\f air intake port Air filter unit Attention z T ake care not to touch the radiator fin when removing dirt or dust.
Maintenance/replacement ENGLISH - 149 Maintenance 3) Clean and dry the air filter unit. zCleaning the air filter unit (i) Soak the air filter unit in cold or warm water and then lightly rinse it. • ▶ Do not use cleaning tools such as brushes. • ▶ When rinsing, hold the frame of the air filter unit without putting strong pressure on the filter unit. (ii) Rinse the unit two to three times using fresh water each time. • ▶ Insufficient rinsing may result in odors. zDrying the air filter unit • Let the unit naturally dry of f in a well-ventilated place where there is little dust and the unit is protected from direct sunlight. • Do not dry using drying devices such as dryers. 4) Attach the air filter unit to the projector . ▶zThe air filter unit has no dif ference between top and bottom, but is two-sided. Match the protrusion position of the air filter unit with the grooves on the projector body. ▶z Hook the air filter unit frame at the exhaust port side to the two tabs of the back side of the projector ’ s air filter unit compartment and perform Step 2) in the reverse order to attach. • Confirm that the tabs of the air filter unit compartment of the projector body are hooked to the air filter unit frame. Tabs on the project\ior body Tabs on the project\ior body Protrusion o\f the a\iir \filter unit Protrusion o\f the a\iir \filter unit Groove on the proje\ictor body Groove on the proje\ictor body 5) Attach the air filter cover to the projector and use a Phillips screwdriver to tighten the air filter cover screw . ▶zPerform Step 1) in the reverse order. Attention z After washing the air filter unit, dry it thoroughly before attaching it back to the projector . Attaching a wet unit will cause an electric shock or malfunction. z Do not disassemble the air filter unit.
Maintenance/replacement 150 - ENGLISH Maintenance Note zT ake care not to touch the radiator fin when removing dirt or dust. zMake sure that the air filter unit is properly attached before using the projector . If it is not properly attached, the projector will suck in dirt and dust causing a malfunction. – ▶ If you use the projector without attaching the air filter unit, the message appears on the projection screen for approximately 30 seconds. zReplace the air filter unit with a replacement filter unit (Model No.: ET -EMF510) if it is damaged or if the dirt does not come of f even after washing. zAir filter replacement is recommended after cleaning the unit two times. zThe dust-proof properties may be reduced after each cleaning. Replacing the unit ▶■ Air filter unit If dirt does not come off even if the unit is maintained, it is time for the unit to be replaced. The replacement filter unit (Model No.: ET-EMF510) is an optional accessory. To purchase the product, consult your dealer. ▶■Replacement of the air filter unit Attention z Make sure to turn of f the power before replacing the air filter unit. zWhen replacing the unit, make sure that the projector is stable. Perform the replacement in a safe place where the projector will not be damaged even if you drop the air filter unit. 1) Remove the air filter cover . ▶zUse a Phillips screwdriver to turn the air filter cover screw counterclockwise until it turns freely , and then remove the air filter cover . Air filter cover f\ ixing screw Air filter cover 2) Pull out the air filter unit. ▶zRemove the air filter unit frame at the front side (with the lens) from the tab of the projector body while slightly pressing the center and pull out in the direction of the arrow , and then remove the frame at the opposite side from the tab. ▶z After pulling out the air filter unit, remove large foreign objects and dust from the air filter unit compartment and the air intake port of the projector body if there are any . Tabs on the projector body Tabs on the projector body Air filter unit com\’partment and the projector’\f air intake port Air filter unit Attention z T ake care not to touch the radiator fin when removing dirt or dust.