Panasonic Projection Television Pt 52dl10 Operating Instructions

							71
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Power does not turn ON
The power turns OFF
(the Power LED blinks Orange
and the TEMP LED and LAMP
LED lights up Red).
Remote control does not
function
Image shakes
Image is not clear
Color patches or no color
Image appears doubled or
tripled.
A black stripe appears for a
moment when changing
channels using the VCR.
Images disappear at the top
and bottom of the screen
During ZOOM or JUST modes,
the image is cut off at the top
and bottom.
Channel number remains
displayed.
The projection TV set makes a
cracking sound
The projection TV set makes a
high whistling sound when the
power is ON.
Some parts of the screen do
not light up.Checks
• Is the power plug plugged in?
• If the power does not turn on using the remote, check if the projection
TV set is turned on.
• Is the Power Indicator blink Orange?
• Check whether or not the sir vents are clogged.
• Is the set begin use in a location that is hot?
     
Turn the set on using the power button on the remote control after
the Power LED has lit up Red. (When the Power LED is blinking
Orange, the cooling fan is operating.)
This indicates that the set is heated and has not cooled off enough.
The lamp may be malfunctioning if the power does not turn on even
after the above steps. Please consult your nearest dealer.
• Are the batteries dead or inserted incorrectly?
• Is the remote control sensor in direct light of florescent lamps or other
strong sources of light?
• Is the antenna or antenna cable old, broken or shorted?
• Is the antenna cable connected properly?
• When using a VCR and selecting channels on the TV, is the TV/VIDEO
mode for the VCR set to TV?
• Is the antenna facing the right direction?
• Is the antenna receiving any signals reflected off of mountains or
buildings.
• The image distorts when channels are changed.
• When using 16:9 image software, there is no picture at the top and
bottom of the screen (cinema vision size software, etc.).
• Has the screen position been changed?
     
If so, adjust screen positioning.
• Press the INFO/RECALL button.
During VIDEO input, channel number is displayed until an image is
displayed.
• If there are no problems with image or sound, it is the sound of the
cabinet shrinking due to room temperature changes. This is not a
malfunction.
• This is the sound of the internal (DLPTM) starting UP. This is not a
malfunction.
• DLPTM is manufactured using an extremely high level of precision
technology, however sometimes some parts of the screen may be
missing picture elements. This is not a sign of a malfunction.Page
20
20
20, 21
–
–
7
–
–
8, 9, 10
–
–
–
–
–
28, 29
35
–
–
– 
						

							72
Cleaning
The unit contains many plastic
parts. For this reason DO NOT
use benzine, thinner or other
chemicals to clean the unit.
DO NOT bring into contact
with insecticide or other
volatile substances.
DO NOT allow the unit to come
into contact for extended
periods with rubber or vinyl
products.Dust will accumulate on the
picture screen. Please wipe
with the supplied soft cloth
(Part No: TPEX007) from
time to time. If you use a
chemically treated cloth,
please be careful to follow the
instructions that come with
the cloth.
Remove dirt and soiling by
wiping with a light cloth.
Even if the unit is heavily
soiled, do not apply cleaner
directly to the unit. Soak a
cloth in a solution of neutral
cleanser thinned with water.
Then wring out the cloth, wipe
the unit clean, and finish by
wiping with a dry cloth.
Do not use any type of
cleansers on the picture
screen.
To ensure continued excellent performance by this product, periodic cleaning is recommended. 
						

							73
Specifications
Power SourceAC 120 V, 60 Hz
Power ConsumptionAverage use : Maximum Current 3.8 A
Stand-by condition : 0.74 W (when cooling fan is stopped)
Dimensions
( W × D × H )47.7 ″ (1211 mm) × 17.7 ″ (450 mm) × 39.2 ″ (995 mm)
Display52-inch, 16 : 9 aspect ratio
45.31 ″ (1151 mm) (W)  × 25.49 ″ (647.5 mm) (H)  × 52 ″ (1321 mm) (diagonal)
Operating conditionsTemperature : 34 °F - 104 °F (0 ° – 40 °C)
Humidity : 20 % - 80 % (non-condensing)
Speaker4 Speakers
Audio Output Sound20 W [10 W + 10 W ] (10 % THD)
Accessories Supplied
Remote control Transmitter EUR511162
R6 (AA) Battery × 2
RGB cable : TSXF147
Weight (Mass)130 lbs. (59 kg) Net
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
Input signalsRGB input D-SUB 15pin
AV INPUT 1- 4 VIDEO 1.0 Vp-p (75 Ω)
(RCA Pin Jack Type)
S-VIDEO
Y : 1 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
(not supplied for AV INPUT 3)
(Mini DIN 4pin)
AUDIO L-R 0.5 Vrms
(RCA Pin Jack Type × 2)
TO AUDIO AMP AUDIO  L-R 0.5  Vrms
(RCA Pin Jack Type × 2)
COMPONENT VIDEOY 1.0 Vp-p (including synchronization)
INPUT 1-3 P
B / PR± 0.35 Vp-p
AUDIO L-R 0.5 Vrms
(RCA Pin Jack Type × 2)
HID Lamp200 W HID (High Intensity Discharge) Lamp (recommended replacement period
approximately 5000 hours)
Channel Capability-181VHF-12 : UHF-56 : Cable-125
AV  PROG. OUT VIDEO 1.0 Vp-p (75 Ω)
(RCA Pin Jack Type)
S-VIDEO
Y : 1 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
(Mini DIN 4pin)
AUDIO L-R 0.5 Vrms
(RCA Pin Jack Type × 2)
Output signals Screen Size 
						

							74
MEMO 
						

							75
MEMO 
						

							Customer’ Record
The serial number of this product can be found on its back cover. You should note this serial number in the
space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number          PT-52DL10                                                 Serial Number
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic way Secaucus
New Jersey 07094Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico Inc. (“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Printed in Japan
MBS0600F2030(MS)