Panasonic Projection Television Pt 52dl10 Operating Instructions

							31
Cable TV
LIGHT
ASPECT
MUTE TV/VIDEO
VCR
DVDAUXRCVR
DBSTV
DTV
CH
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
POWER
CBL
CH
ACTION
CH
Confirming
Confirm that registration with cable TV and connection of equipment are
completed. Turn the cable TV tuner and select the desired volume level.
1
2
3
Press while pointing the remote control
towards the cable TV tuner.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment do not operate,
reset code (see page 63, 64).
Operate the cable TV tuner and select the desired volume level.
CBL
POWER
TO
AUDIO
AMPL
R AUDIO VIDEO S-VIDEO
L
R
AUDIO VIDEO
L PRPBY
R
INPUTANT1 ANT2SPLIT
OUTCOMPONENT VIDEOINPUTPROG
OUT2 13
2 13
ANT1 ANT2
SPLIT
OUT
ANTENNA TERMINALS
ON THE BACK OF THE
PROJECTION TV
CABLE BOX
INPUT    OUTPUT
To antenna
Input
Incoming Cable from Antenna
or Cable TV System.
When the antenna cable is
connected to the TV antenna
terminal via a cable box or VCR, set
the TV channel to CH3 or CH4. After
select ANT2 in the PROGRAM
CHANNELS (see page 24).
This does not apply when signal is
input from VIDEO INPUT. 
						

							32
Searching for the desired channel (Channel search)
Notes:
• To end channel search, press  
SEARCH STOP.
• Channel search can be activated from the MENU screen.
• Channel search is valid only during TV mode.
When the SEARCH button is
pressed during single screen.
When a channel button is pressed during
channel search.
• Number keys:
Example: When 7 is pressed, channel 7 is
displayed in single screen.
• Channel up and down keys:
When  
or  
button is pressed, the next
channel up or down is displayed in single
screen.
Sound from the left screen is output from the
speakers on the projection TV set.
When a channel button is pressed during
channel search.
 
The selected channel will be displayed on
the right screen. (Freeze is deactivated)
Sound from the left screen is output from the
speakers on the projection TV set.
1
4
62
5
7
When the SEARCH button is
pressed during screen, PoutP or
pause.
SEARCHSTOP
SEARCHSTOP
Ex. Select channel 7
Ex. Select channel 7
LIGHT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
SLOWSTILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REW PLAY
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
ASPECT
OPEN/CLOSE
FREEZETV/VCR
SPLITFF
SWAPPAUSE
SEARCHSTOP
123
456
789
0
CH
ACTION
CH
CH3
CH3
CH7
CH5CH3
1
4
62
5
7CH3
CH7
Channel search:
Channel search displays each channel, in order, as a paused image. Channels are
displayed from the left top to the right bottom in order. When it reaches the right bottom,
the next channel is displayed at the left, overwriting the previously displayed channel. 
						

							33
Playing a VCR or other peripheral equipment
PC INPUTINPUT 4S-VIDEO VIDEO
L-AUDIO-R
1
2
3Turn the projection TV on.
The input mode changes each time this
button is pressed. (See page 51 and 52)
Operate the connected equipment.POWER
Confirming connections
Confirm that the projection TV is in
standby mode.A video camera uses the Video
Input 4 terminal on the front of
the projection TV.
To S-video output
or video output
To audio outputVCR
Laser Disk Player
DVD player
• When playing
    a video
• When playing
    a DVD
• When playing
    a laser disc
• When playing from
    a video camera
∗1 No input mode is displayed for terminals with no
equipment connected.
∗2 No input mode is displayed for terminals with no
signal.
Turning the power on and switching input modes
This equipment can also be
connected to the rear
terminals. See Connections
for details.
Notes:
• When the remote control is unavailable, input modes can also be switched
on the projection TV set using the TV/VIDEO button.
• Component 1 - 3 and PC is displayed during single screen, but is not displayed
during split screen.
TV
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
COMPONENT 3
PC
COMPONENT 2
COMPONENT 1
Video camera
INPUT 4
S-VIDEO VIDEO
L-AUDIO-R
PC INPUT
LIGHT
ASPECT
MUTE
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
POWER
TV/VIDEO
TV/VIDEO
∗2
∗1
∗1
∗1
∗1 ∗1 
						

							34
Playing games in game mode
PC INPUTINPUT 4S-VIDEO VIDEO
L-AUDIO-R
LIGHT
ASPECT
MUTE TV/VIDEO
VCR
DVDAUXRCVR
DBSTV
DTV
CH
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALRH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
POWER
CBL
GAME
1
2
3Turn on the TV.
Press the GAME button to switch to game
mode.
When finished, press the GAME button again. (Turn off the game mode
by switching input modes or changing the channel.)
GAME
POWER
Confirming connections
Confirm that the projection TV is in
standby mode.Example: When using the Video Input 4 terminal on the front of the
projection TV.
To S-video output
or video output
To audio output
Turning on the projection TV and switching to game modes
Video game
player
TV screen
• Displays the lapsed time.
Lapsed time is displayed for 5 seconds
every 30 minutes.
Be sure to rest your eyes every 30
minutes.
GAME  30 GAME  60 GAME  90
The lapsed time display stops after 90
minutes.
Notes:
• Video input mode can be changed when the GAME button is pressed.
• Game mode is maintained when power to the projection TV is turned off.
• When game mode is selected: Picture will be set to PICTURE MENU, and
sound will be set to SOUND MENU.
• Picture and sound can be set as desired. (See page 40, 42.)factory default setting
Item
Picture menu
Audio menu
SPATIALIZER
Aspect
Setting
GAME
GAME
ON
FULL
INPUT 4
S-VIDEO VIDEO
L-AUDIO-R
PC INPUT 
						

							35
Recall / Mute
LIGHT
ASPECT
TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
MUTE
INFO/RECALL
Press this button to display channel number, off-timer remaining
time, screen modes, and other settings. For approximately 10
seconds, only the channel number remains,.....
The channel number remains, but other information disappears
after a specified period. Press this button again to delete channel
number display.INFO/RECALL
Recall (On-screen display)
Useful when answering the phone or receiving unexpected visitors
MUTE
Mute
Press this button to mute the sound. Press again to reactivate
sound. Sound is also reactivated when power is turned off or
volume level is changed.
Full Information         Channel         No display
SLEEP TIMER       30
STEREO
SAP
MONO
NORMAL
CH123
CH123
channel number or Video Input
Selected
multiplex sound
ASPECT mode
off-timer status (See page 54)
The INFO/RECALL button switches the display in the following order.Full Information
Channel number
ANT2 is displayed under the
channel number when antenna2
is connected.
STEREO
SAP
MONO
NORMAL
CH123ANT2 
						

							36
(The previously selected screen
appears on the left.)
Split screen
LIGHT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
SLOWSTILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAY
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
ASPECT
OPEN/CLOSE
FREEZETV/VCR
SPLITFF
SWAPPAUSE
TV/VIDEO
RH-SPLIT
Split screen enables you to search other channels on the right screen or check video recording status.
Splitting the screen
SPLITFFPress to splitPress to select modes.
(FULL)
Freezing pictures
FREEZETV/VCR
OPEN/CLOSEPress during single screen to
freeze.
The screen is split and the
freeze image is displayed on
the right and the broadcast
channel continues on the left. Press to return.
SPLITFF
FREEZETV/VCR
OPEN/CLOSE
Notes:
•Split screen can be accessed during TV signal and Video1-4 input
modes, however, this does not apply when signal is input from
Component 1-3 and PC.
• Sound from the left screen is output from the speakers on the projection
TV set.
• When the screen is split, signals of the left screen are output from the
rear monitor output terminal.
• The left and right screen are processed by individual circuits and,
therefore, may have slight variation in sound and image quality.
• Split screen returns to single screen when the projection TV is turned
off.
ASPECT
• Returning to one screen. Example: Two screen mode set
to NORMAL aspect.
Selecting the screen mode for
split screen.
(PoutP) (NORMAL)
Press to recover.
CH3CH10
CH3CH10
CH3CH10
CH10
CH3
FREEZECH10 
						

							37
Screen mode names:
SPLIT SCREEN FULL
1
Changing the channel of the right screen
during SPLIT SCREEN FULL, SPLIT SCREEN NORMAL, and
PoutP.
RH-SPLITPress to operate right screen.
5
While  
is displayed on the screen, press
to switch modes.
Example:
Change  to
channel 5.
Viewing videos
While 
 
is displayed on the screen, press to switch
modes.
• The channels for the left screen can be changed in the same
way as when the screen is single.
• When ACTIVE is displayed, the left screen will not operate.
Swapping left and right screens
During SPLIT SCREEN FULL,
SPLIT SCREEN NORMAL,
PoutP: Press to swap.
Example:
During SPLIT SCREEN NORMAL.
Notes:
• The right and left screens cannot display the same picture at the same time.
• Use  the right screen when playing video games on a split screen (to avoid distortion of images).
• When the ANTENNA setting is set to ANT2, input for the left screen cannot be switched (see page 24).
Split screen
TV/VIDEO
SWAPPAUSE
STILL
2
PoutP
SPLIT SCREEN NORMAL
CH3CH10
CH3CH10ACTIVE
CH5CH10ACTIVE
VIDEO1CH10
CH5CH10ACTIVE
CH10CH5
CH3CH10
CH3CH10
CH3CH10 
						

							38
Adjusting screen position and size
LIGHT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
VOL VOL
INFO/RECALL
CH
ACTION
CH
MENU
ASPECT
Adjusting screen
Press to select the screen mode to adjust.
Notes:
• This projection TV is equipped with various screen modes. If a screen mode with a different aspect as the broadcast
program is selected, image will appear differently. Select the proper screen mode with this in mind.
• Be careful when using this projection TV for commercial purposes or for public use, such as in cafes and hotels.
Shrinking and enlarging images by using screen mode switching function (zoom, etc.) may violate copyright laws.
• Images displayed on a wide screen TV will be cut off or distorted at the edges, when viewing normal aspect images of
4:3 in ZOOM, JUST or FULL mode. Display in NORMAL mode to view the original image intended by the producer.
• For 1080i, 720p and 480p input images, screen position and size cannot be adjusted.
• The adjusted setting will be kept even when the projection TV is turned off.
• The signals output from the monitor output terminal on the back of the projection TV is not affected when the screen
size and position is adjusted.
• C/V-POSITION and H-POSITION can be adjusted during PC mode.
1
2
3
MENU
Press to select ADJUST
menu.
Press to select
POSITION/SIZE.MENUADJUST
CUSTOM
PICTURE
AUDIO
SELECT
SET  UP
EXITPAGEACTION
PICTURE  ADJUST
POSITION/SIZE
CLOCK
AUDIO  ADJUST
ASPECT
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
Press to display the menu screen.
Press to display
POSITION/SIZE.
POSITION/SIZENORMAL
NORMALIZESIZE
1
POSITION
V-POSNORMAL
NORMALIZEH-POS
1
TV / VIDEO /
COMPONENT mode
PC mode
TV / VIDEO /
COMPONENT mode 
						

							39
Switching screen width
During NORMAL mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2.
Press to narrow (SIZE 2).
(SIZE 1) (SIZE 2)
During JUST mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2.
Press to enlarge image
horizontally (SIZE 2).
(SIZE 1) (SIZE 2)
Changing vertical size
During ZOOM mode.
• To return to NORMAL     
ACTION
• To end ADJUSTMENTS    
MENU
(EXIT)
Press to enlarge image
vertically (max. 15).
Displaying images cut off from the screen
For ZOOM mode.
Press to move image upwards.
Adjusting screen position and size
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
Press to widen (SIZE 1).
Press to shrink image
horizontally (SIZE 1).
Press to shrink image
vertically (min. 1).
Press to move image
downwards.
• To return to NORMAL     
ACTION
• To end ADJUSTMENTS    
MENU
(EXIT)
• To return to NORMAL     
ACTION
• To end ADJUSTMENTS    
MENU
(EXIT) 
						

							40
AUDIO ADJ.
NORMAL
AUTO
OFF        ON
OFF        ON
SELECT
AUDIO  MENU
BASS
TREBLE
BALANCE
SPATIALIZER
SPEAKERS
EXITCHANGE
6
4
0—                         + —                         +
—                         +
MENU
ADJUST
CUSTOM
PICTURE
AUDIO
SELECT
SET  UP
EXITPAGEACTION
PICTURE  ADJUST
POSITION/SIZE
CLOCK
AUDIO  ADJUST
Audio Adjustments
Automatically adjusts quite
sound and loud sound for case
of listening.
Emits the original sound.
Amplifies the Low and High
frequencies and outputs
optimum sound.
For programs consisting mainly
of music. Enhances high
sounds.
Enhances high sounds even
more. (Recommended for
those who have a slight hearing
deficiencies.)
When GAME is selected for the picture,
SOUND setting also changes to GAME.
During GAME mode, sound mode cannot
be change in this menu.
When connected a PC, the audio input to
VIDEO 4 is used as the audio output.
Press to select AUDIO ADJUST
STANDARD
DYNAMIC
MUSIC 1
MUSIC 2
AUTO
SPATIALIZER
To enjoy a concert hall effect,
turn SPATIALIZER to ON.
During stereo sound or soft
playing:
During monaural sound:
OFF         ONSPATIALIZER
SPATIALIZEROFF         ON
BASS
Adjusts low sounds
TREBLE
Adjusts high sounds
BALANCE
Adjust left and right
volumes
To reset to NORMAL setting,
select NORMALIZE with the up 
 
and down  
buttons and press ACTION.
NORMALIZE   
   
NORMAL
1
2
3
Press to select the menu to adjust each item.
To adjust settings individually , press the AV ADJUST button to select the desired
menu and adjust using the  left 
 
and  
right  buttons.
Press the MENU button to display the MENU screen and select ADJUST.
Select AUDIO ADJUST of ADJUST from the MENU screen.
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
Press when AUDIO ADJUST screen is displayed.
Select the desired level by listening at the sound.
Press MENU button.
MENU
NORMAL is displayed at default.
When setting are altered, change to NORMALIZE.
See next page
CH
VOL VOL
CH
ACTION