Panasonic Projection Television Pt 52dl10 Operating Instructions

							21
LIGHT
ASPECT
MUTE TV/VIDEO
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
POWER
POWER
Power ON / OFF
Push the Power button to turn the projection TV ON,
from Stand-by mode.
The projection TV must first be switched on at the wall
outlet and the Power switch.
The Power Indicator will blink Green.
Approximately 10 seconds
The Power Indicator will become Green.
Example: The screen above is display for a while after
the projection TV is turned on. (Setting
condition is an example.)
Push the Power button to turn the projection TV to
Stand-by mode.
The Power Indicator will become Orange.
Approximately 90 seconds
The Power Indicator will become Red.
POWER
LED
No illuminated
Red
Green
Green blink
Orange blink
ACTION
Power – OFF
Stand – by
Power – ON
Power – ON
(approximately 10 seconds after)
Power – OFF (by the remote control)
(approximately 90 seconds after)
Power (ON / OFF) button
STEREO
SAP
MONO
NORMAL
CH123
The Power Indicator
LAMP TEMP
Remote Control Sensor
R-STANDBY
G-POWER ON
POWER
Note:
Even when the main power switch (FUNCTION SWITCH) is turned off, and the POWER indicator is not lit, the projection
TV is not completely cut off from the power if the power cable is still plugged in. 
						

							22
LIGHT
ASPECT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
VOL VOL
INFO/RECALL
CH
ACTION
CH
MENU
Flow Chart of Main menu
If the MENU button is pressed, the
MENU screen will be displayed.
If the MENU button is pressed
once more while the menu screen
is displayed, the MENU screen
will be cleared.
ACTION TV/VIDEOMENUVOLUME
CHANNEL
Select MENU desired by pushing Right
“  
” button or Left “  
” button.
The MENU button on the main
body can also be pressed to
display the MENU screen.
12
MENU
CH
VOL VOL
CH
ACTION
The Right “  
” button and
Left “ 
 
” button on the
main body can also be
used to select items on
the MENU screen.
MENU
ADJUST
CUSTOM
PICTURE
AUDIO
SELECT
SET  UP
EXITPAGEACTION
PICTURE  ADJUST
POSITION/SIZE
CLOCK
AUDIO  ADJUST
ACTION TV/VIDEOMENUVOLUME
CHANNEL
MENU
ADJUST
CUSTOM
CHANNEL SEARCH
SLEEP TIMER                0
AUDIO MODESET  UP
MENU
ADJUST
CUSTOM
LANGUAGE
PROGRAM  CHANNELS
LOCK
CLOSED  CAPTION
VIDEOSET  UP
ACTION
ACTION
MENU
ADJUST
CUSTOM
PICTURE
AUDIO
SET  UP
PICTURE  ADJUST
POSITION/SIZE
CLOCK
AUDIO  ADJUST 
						

							23
VIDEOPAGE 1 / 3
SELECTEXITCHANGE
OFF                  ON
NORMAL     FRAME
VIDEO  NR
DVC  PLAYBACK  MODE
LOCK
OFF                ON
OFF                ON
— — — —MOTION  PICT.  STATUS
TV  PARENTAL  STATUS
ENTER  CODE  FIRSTCHANGE  SETTING
CHANGE  SETTING
SELECTEXITCHANGE
TO PICTURE
ADJUST menu
TO AUDIO MODE
adjust screen
TO VIDEO
adjust screen TO LANGUAGE
selection screenTO PROGRAM
CHANNELS adjust screenTO LOCK
selection screenTO CLOSED CAPTION
selection screen TO CHANNEL
SEARCH screenTO SLEEP TIMER
adjust screenTO AUDIO
ADJUST menu TO POSITION/
SIZE
Flow Chart of Main menu
The CHANNEL button on the
main body can also be pressed
to select items in the MENU
screen.
PICTURE ADJ.NORMAL
DYNAMIC
COOL
OFF        ON
SELECT
PICTURE  MENU
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR  TEMP
BLACK EXT.
EXITACTION
30
0
0
0
10
—                          + —                          + —                          + —                          +
AUDIO ADJ.NORMAL
AUTO
OFF        ON
OFF        ON
SELECT
AUDIO  MENU
BASS
TREBLE
BALANCE
SPATIALIZER
SPEAKERS
EXITCHANGE
6
4
0—                         + —                         +
—                         +
SLEEP  TIMER
0SLEEP  TIMER
EXITCHANGE
AUDIO  MODE
EXITCHANGE
AUDIO  MODESTEREOSAP
MONO
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAMVIDEOPAGE 2 / 3
SELECTEXITCHANGE
OFF                  ON
OFF                  ON
   
TV              GAME
3D Y/C FILTER
ID-1
SCAN  MODEVIDEOPAGE 3 / 3
SELECTEXITCHANGE
GAME
480p  COLOR MATRIXVIDEO  INPUT  LABELVIDEO 1
 SDTV      HDTV
ACTION TV/VIDEOMENUVOLUME
CHANNEL
1 2
POSITION/SIZENORMAL
NORMALIZESIZE
1
LANGUAGE
EXITCHANGE
LANGUAGEFRAN   AISENGLISH
CH
VOL VOL
CH
ACTION
1
2
See page 42See page 38
See page 40
See page 54
See page 53
See page 61
See page 24
See page 48See page 46
See page 45, 51, 55 - 59
CLOSED  CAPTION
NO
OFF
ON  MUTE
MODE
SELECTEXITCHANGE
• When the set is connected to the
PC, CLOCK can be adjusted.
CLOCKNORMAL
SELECT
CLOCK  PHASE
DOT  CLOCK
EXITACTION
0
0
ADJUST
TO CLOCK
See page 60
• ANTENNA switching for
PROGRAM CHANNEL is
possible only during TV mode.
See page 32 
						

							24
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM
MENU
ADJUST
CUSTOM
SELECT
LANGUAGE
PROGRAM  CHANNELS
LOCK
CLOSED  CAPTION
VIDEOSET  UP
EXITPAGEACTION
Press to select
PROGRAM
CHANNELS.
Tuning channels (Automatic channel programming)
Automatically searches and adds receivable channels to memory.
1
2
Press to select
TV or CABLE.
3
Channel tuning cannot be performed when the MAIN picture is not receiving a TV broadcast (tuning is not possible).
Press the MENU button to display the MENU
screen and select SETUP.
CH
VOL VOL
CH
ACTION
Press to display
the PROGRAM
CHANNELS.
CH
VOL VOL
CH
ACTION
Press to select
MODE.
CH
VOL VOL
CH
ACTIONPress to select
ANT1 or ANT2. Press to select
ANTENNA.
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM
4Press to select
AUTO PROGRAM.
AUTO  PROGRAM
Activate
       AUTO  PROGRAM?
NO
EXITACTION
YES
CHANGE
CH
VOL VOL
CH
ACTION
Press to display
the confirmation
screen.
Note:
TV or Cable Tuning mode must be set according to your connections.
LIGHT
ASPECT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
VOL VOL
INFO/RECALL
CH
ACTION
CH
MENU
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM 
						

							25
Notes:
• When buttons are pressed with AUTO PROGRAM running, the projection TV set will return to normal viewing.
• After AUTO PROGRAM is finished, the lowest channel number added will be received.
• When there are no receivable channels, channel 69 is displayed (channel 125 for cable TV).
• PROGRAM CHANNELS are valid only during TV mode.
• Some channels with very weak signals may be locked into memory. It desired, these channels can be deleted
manually using the Manual Program feature.
Tuning channels (Automatic channel programming)
5
Press to select YES.
Channels will automatically advance until all channels have been scanned. Channel
numbers with a video signal present will turn blue which indicates stored in the Channel
Scan Memory.
Press to exit menu.AUTO  PROGRAM
In  AUTO  PROGRAM
CHANNEL    
59
MENUSTOP
CH
VOL VOL
CH
ACTION
Press to run AUTO PROGRAM.
MENU 
						

							26
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM
MENU
ADJUST
CUSTOM
SELECT
LANGUAGE
PROGRAM  CHANNELS
LOCK
CLOSED  CAPTION
VIDEOSET  UP
EXITPAGEACTION
Press to select
MODE.
Tuning channels (Manual channel programming)
Use this setting when changing setting of receiving channels or changing the channel display.
1
2
Press to select
MANUAL
PROGRAM. Turn the projection TV on and select the broadcast channel. Follow the steps on the previous page to display the
PROGRAM CHANNEL screen.
This PROGRAM CHANNEL screen can be displayed when the MAIN picture
is a TV broadcast.
Selecting the PROGRAM CHANNELS  menu.
Press to select
PROGRAM
CHANNELS. Press the MENU button to display the MENU screen and select SETUP.
4
MANUAL  PROGRAM
ENTER  CHANNEL;
122
EXITDELETECH SELECT(or number key)
ADD
CH
VOL VOL
CH
ACTION
Press to display
the PROGRAM
CHANNELS.
CH
VOL VOL
CH
ACTIONPress to select
TV or CABLE.
CH
VOL VOL
CH
ACTION
Press to display
the MANUAL
PROGRAM
screen.
3
CH
VOL VOL
CH
ACTIONPress to select
ANT1 or ANT2. Press to select
ANTENNA.
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM
LIGHT
ASPECT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
VOL VOL
INFO/RECALL
CH
ACTION
CH
MENU
PROGRAM  CHANNELS
SELECTEXITCHANGE
MODE              TV               CABLE
ANTENNA      ANT1               ANT2
AUTO  PROGRAM
MANUAL  PROGRAM 
						

							27
Tuning channels (Manual channel programming)
Adding or deleting channels
Press to select channel ( or number keys ).4
5
Press to add channels to memory ( blue ).
6Repeat steps 4 and 5 to continue adding or deleting channels.
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION
Press to delete channels from memory ( yellow ). Press to select channel.
Press to exit menu.
MENU
Notes:
• PROGRAM CHANNELS are valid only during TV mode.
• Some channels with very weak signals may be locked into memory. It desired, these channels can be deleted manually
using the Manual Program feature.
MANUAL  PROGRAM
ENTER  CHANNEL;
122
EXITDELETECH SELECT(or number key)
ADD 
						

							28
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
LIGHT
MUTE TV/VIDEOPOWER
VCR
DVDAUXRCVR
DBSTV
DTVCBL
CH
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
ACTIONVOL VOL
CH MENU
INFO/RECALL
ASPECT
ASPECT button
The aspect mode changes each time the ASPECT button is
pressed.
Notes:
• For a 480p signal input during component input signal mode, the mode
switches ZOOM and FULL only.
• When a 1080i and 720p signal is being received, the mode is set to FULL,
and aspect switching is not possible.
• During PC mode, the mode switches between NORMAL and FULL only.
• During split screen, the modes will change as follows:
NORMAL                  JUST
FULL                    ZOOM
FULL              NORMAL              Pout P
ASPECT
FULL 
						

							29
ASPECT Controls
Mode
NORMAL
ZOOM
FULL
JUSTExplanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM mode magnifies the central section of the picture.
FULL will display the picture at its maximum size but
with sight elongation.
JUST mode will display a 4:3 picture at maximum size
but with aspect correction applied to the center of the
screen so that elongation is only apparent at the left
and right edges of the screen. The size of the picture
will depend on the original signal.
Notes:
• The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen
monitor. When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen
size is automatically set to FULL mode.
• The screen size also changes if ID-1 is detected.
• The screen size will also change if S1 detection has been set.Picture
NORMAL
3 4
ZOOM4
316
9
FULL4
316
9
JUST4
39 16 
						

							30
VHF, UHF and CATV
MENU ACTION
VOLUMECHANNEL TV/VIDEO
MENU ACTION
VOLUMECHANNEL TV/VIDEO
Power switch
Remote control sensorOperation can be done from the
projection TV.• Channel buttons
• Volume buttons
LIGHT
ASPECT
MUTE TV/VIDEO
VCR
DVDAUXRCVR
DBSDTVCBL
SLOW OPEN/CLOSE STILL
123
456
789
0
R-TUNE PROG
AV-ADJNORMALGAME
RH-SPLIT
EXITVCR RECGUIDE
REWSEARCH
STOPPLAYSPLITFF
FREEZETV/VCRSWAPPAUSE
VCR/DBS CHANNEL
VOL VOL
MENU
INFO/RECALL
CH
ACTION
CH
POWER
TV
Press to turn the projection TV on
(see page 21).
Press to operate the projection TV with the
remote control.
Press to select the desired channel.
Press to select the desired volume level.1
2
3
4POWER
TV
Notes:
• The channel number and volume level are stored even after the projection
TV is turned off.
• Power consumption and howling of sound can be reduced if the volume level
is lowered.
CH
VOL VOL
CH
ACTION
CH
VOL VOL
CH
ACTION