Panasonic Projection Television Pt 52dl10 Operating Instructions

Projection Television
Operating Instructions
PT-52DL10
Model No.
TQBC0215-1
D
L
PT
MA
 
TE
X
A
S I
NS
T
RU
M
E
N
TS
 
TE
C
HN
O
LO
G
Y
HDTVC
O
M
P
A
T
IB
L
E
 
 
 1
08
0
 i
 / 7
2
0pSPATIALIZRT3
-D
 S
T
ER
E
O
DLPTMA TEXAS INSTRUMENTS TECHNOLOGYHDTVCOMPATIBLE   1080 i / 720pSPATIALIZRT3-D STEREO
For assistance, please call : 1-888-VIEW PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com   (USA)
For assistance, please call : 787-750-4300
or visit us at...

2
Important Safety Instructions
WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
Note to...

3
12. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
13. Never push objects of any kind into this projection TV through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projection TV.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to
provide some protection against voltage surges...

4
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new projection television set.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt also, and note down serial number of your set in the space provided on
the rear cover of these instructions.
Visit our Panasonic Web Site for USA   :   www.panasonic.com
FCC...

5
Table of Contents
Important Safety Instructions ................................ 2
Installation ............................................................... 6
Receiver Location .................................................. 6
Optional External Equipment ................................. 6
AC Power Supply Cord .......................................... 6
Safety Precaution ................................................... 6
Remote Control Battery Installation ....................... 7
Connecting...

6
The Video / Audio connection between components can be made with shielded video and audio cables. For best
performance, video cables should utilize 75 Ω coaxial shielded cables. Cables are available from your dealer or electronic
supply house.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
Installation
Receiver Location
This unit is intended to be used with an optional stand or...

7
Remote Control Battery Installation
Helpful Hint:
For frequent remote control users, replace old
batteries with Alkaline batteries for longer life.
Note: In order to maximize the life of the batteries, the
lighted buttons on the Remote Control can be turned OFF
and ON by pressing R-TUNE and RECALL at the same
time.
 
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1.   Batteries...

8
Antenna / Cable Connection
Incoming Cable From Home Antenna (75 Ω)
VHF / UHF
on Back of Set
Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Incoming 75 Ω Cable (From Cable Company)
VHF / UHF
on Back of Set
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper...

9
Antenna Connection (Cable Box, no  VCR)
Use this configuration when connecting the projection TV to a cable TV system using a Cable Box.
Connect the cable from the antenna
or cable system to the ANT1
terminal on the back of the
projection TV.
Incoming Cable from Antenna
or Cable TV System
TO
AUDIO
AMPL
R AUDIO VIDEO S-VIDEO
L
R
AUDIO VIDEO
L PRPBY
R
INPUTANT1 ANT2
SPLIT
OUTCOMPONENT VIDEOINPUTPROG
OUT2 13
2 13
ANT1 ANT2
SPLIT
OUT
Installation
ANTENNA TERMINALS
ON THE BACK OF THE
PROJECTION TV
CABLE...

10
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the projection TV to a cable TV system using a Cable Box and VCR.
Connect the cable from the antenna
or cable system to the ANT1
terminal on the back of the
projection TV.Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna input terminal on the
back of the VCR.
CABLE BOX Incoming Cable from Antenna
or Cable TV System
TO VCR Connect the cable from the
antenna or cable system to
the Input...